Lots of channels no TV and No EPG (Freesat over SAT>IP)

[PaulMc]

Here's the latest log file. https://drive.google.com/file/d/1oeTdx7v...sp=sharing

Still not working but I can see you are narrowing it down.

There is no rush to fix this. Have a great Christmas sub. Enjoy time with your family.

[PaulMc]

Here's another log file https://drive.google.com/file/d/16pgqmC_...sp=sharing

It feels like there is progress even though it has the same error.

This time it did tune and do some processing for a minute. This was the display: "Scanning freq=10714 sr=22000 pol=h fec=56 msys=dvbs mtype=qpsk"

It looks like this was the only frequency it tried.

The difference between this one and the previous one is that I noticed in the Devices page that the two Sat tuners were enabled but unavailable. I did a rescan of the devices and they then showed as available. Then I reran the EPG Grab.

[mvallevand]

Once it got a good IP it seems to be working. I think the display URL is the station frequency though. Is there any log on the SAT>IP device that it is actully tuning 11428?

It looks like it did the 11428 scan and then tried the natural frequencies.

Martin

[PaulMc]

Is there any log on the SAT>IP device that it is actully tuning 11428?

There is no logging on the tuner, no. Also, it was only 10714 I saw and was mentioned in the log file and not 11428.

Merry Christmas Martin.

[mvallevand]

No the logs do say it is using 11428 the locator was changed and it looks like it tried for the first one minute

2023-12-24 21:40:26.279 [DEBUG][78] Will use device for EPG: TELESTAR DIGIBIT Twin_Rev.3 (236b7fd0-1dd2-11b2-80bd-c7e9a4189921)-1
2023-12-24 21:40:26.279 [DEBUG][78] Will use: rtsp://192.168.0.199:554/?src=1&freq=11428&sr=27500&pol=h&fec=23&msys=dvbs&mtype=qpsk&ro=0.35&plts=on&pids=0,3002,3003
2023-12-24 21:41:26.047 [DEBUG][78] Stop SATIP stream

Sub will know it looks very close now.

Martin

[PaulMc]

No the logs do say it is using 11428 the locator was changed and it looks like it tried for the first one minute

2023-12-24 21:40:26.279 [DEBUG][78] Will use device for EPG: TELESTAR DIGIBIT Twin_Rev.3 (236b7fd0-1dd2-11b2-80bd-c7e9a4189921)-1
2023-12-24 21:40:26.279 [DEBUG][78] Will use: rtsp://192.168.0.199:554/?src=1&freq=11428&sr=27500&pol=h&fec=23&msys=dvbs&mtype=qpsk&ro=0.35&plts=on&pids=0,3002,3003
2023-12-24 21:41:26.047 [DEBUG][78] Stop SATIP stream

Sub will know it looks very close now.

Martin

Sorry, you are correct. I didn't see this on screen only in the log file.

[sub]

Definitely getting closer.

Here is one more for you to try.

[sub]

Actually...another small tweak (to try improving the IP address detection).

[PaulMc]

Actually...another small tweak (to try improving the IP address detection).

...and the log file https://drive.google.com/file/d/1_LEmc0E...sp=sharing

I've just realised that there are a lot more channels than on previous tunings. I've not retuned for the last three updates. It appears there are a lot of repeated channels in there for some reason. I don't think this matters as far as the EPG is concerned but I will probably do a complete reinstall at some point.

Right I'm off to peel some spuds!! ?

Merry Christmas everyone!

[mvallevand]

Merry Christmas to you too, and Happy Boxing Day sub

When you rescan to you remember to untick all the boxes when you rescan, as you noted there are a lot of duplicates.

After you clean it up it might be interesting to save npvr.db3 then automap all your channels to DVB to see if Now/Next guide data is working now that the initialization of SAT>IP it to a valid IP.

Martin