Skip frequencies ? Channels missing

[mvallevand]

It should be on the linux system where NextPVR works,

Martin

[FloFlow]

I dont use NextPVR on my Linux distro. Same PC btw.

[mvallevand]

I misread post one you weren't comparing with NextPVR on Linux Maybe you use TVHheadend and if can be done this way. https://docs.tvheadend.org/documentation...a-mux-dump

For my instructions to work you could

curl https://git.linuxtv.org/dtv-scan-tables....t/fr-Paris -O

If you don't the utiility it is sudo apt install dvb-tools

Martin

[FloFlow]

The files I provided by following your instructions is not enough ?

edit : I added the full mux from tvheadend on the Dropbox folder (sample_file.ts)

[mvallevand]

Thanks your first file was fine, but because you edited an old post I didn't notice it, I don't review old posts. It proves what was suspected though onnly one of the channels properly defines the Running status. Version 7.1.1. is adapted to this and it will be out soon, maybe by the time you read this post

Code:

* SDT Actual, TID 0x42 (66), PID 0x0011 (17) Version: 1, sections: 1, total size: 151 bytes - Section 0: Transport Stream Id: 0x0004 (4) Original Network Id: 0x20FA (8442) Service Id: 0x0401 (1025), EITs: yes, EITp/f: yes, CA mode: free Running status: undefined - Descriptor 0: Service (0x48, 72), 12 bytes Service type: 0x19 (Advanced codec HD digital television service) Service: "M6", Provider: "MULTI 4" Service Id: 0x0402 (1026), EITs: yes, EITp/f: yes, CA mode: free Running status: undefined - Descriptor 0: Service (0x48, 72), 12 bytes Service type: 0x19 (Advanced codec HD digital television service) Service: "W9", Provider: "MULTI 4" Service Id: 0x0407 (1031), EITs: yes, EITp/f: yes, CA mode: free Running status: undefined - Descriptor 0: Service (0x48, 72), 14 bytes Service type: 0x19 (Advanced codec HD digital television service) Service: "Arte", Provider: "MULTI 4" Service Id: 0x0415 (1045), EITs: yes, EITp/f: yes, CA mode: free Running status: undefined - Descriptor 0: Service (0x48, 72), 18 bytes Service type: 0x19 (Advanced codec HD digital television service) Service: "France 5", Provider: "MULTI 4" Service Id: 0x0416 (1046), EITs: yes, EITp/f: yes, CA mode: free Running status: undefined - Descriptor 0: Service (0x48, 72), 14 bytes Service type: 0x19 (Advanced codec HD digital television service) Service: "6ter", Provider: "MULTI 4" Service Id: 0x041A (1050), EITs: yes, EITp/f: yes, CA mode: controlled Running status: running - Descriptor 0: Service (0x48, 72), 24 bytes Service type: 0x16 (Advanced codec SD digital television service) Service: "PARIS PREMIERE", Provider: "MULTI 4"

Martin

[FloFlow]

Ok thank you!