2005-10-22, 10:17 PM
I've missed several season recordings this week, but with no error that I can find. While a couple did work, I missed Survivor, Lost and Invasion, all new episodes. The programs still show in my reoccuring recordings list, and the EPG updates have succeeded.
Since the recording service log doesn't show the date but instead just the time, I'm having a hard telling exactly what entries might go with the shows I missed, but as best I can tell, the system didn't even try to record Lost, Invasion and Survivor. For your reference, Lost and Invasion are on channel 4 at 9:00 pm and 10:00 pm, while Survivor is on channel 5 at 8:00 pm. In the log there's are two recordings early in the log on channel 26 where done on Tuesday. The last is CSI being recorded at 9:00pm on channel 5 Thursday which was a one-time recording I selected in the guide after Survivor was over.
Any suggestions? Is there anything I can do to make sure I don't miss other reoccurring recordings short of must making sure they appear as Pending the day they are due?
Thanks,
Tim
Since the recording service log doesn't show the date but instead just the time, I'm having a hard telling exactly what entries might go with the shows I missed, but as best I can tell, the system didn't even try to record Lost, Invasion and Survivor. For your reference, Lost and Invasion are on channel 4 at 9:00 pm and 10:00 pm, while Survivor is on channel 5 at 8:00 pm. In the log there's are two recordings early in the log on channel 26 where done on Tuesday. The last is CSI being recorded at 9:00pm on channel 5 Thursday which was a one-time recording I selected in the guide after Survivor was over.
Code:
12:30:01.483 INFO Log started
12:30:01.483 VERBOSE ConexantRecorder::StartRecording(1, 1, 26, 0)
12:30:01.513 VERBOSE Capture Device is based on BlackBird architecture
12:30:01.513 VERBOSE Capture Device is using Conexant (derived) drivers
12:30:01.513 VERBOSE Loading filter names
12:30:01.513 VERBOSE Found names:
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II Capture
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
12:30:01.513 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
12:30:01.814 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
12:30:02.184 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
12:30:02.204 VERBOSE Looking for encoder filter
12:30:02.234 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
12:30:02.244 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
12:30:02.244 VERBOSE getSetting(AutoDetectEncoderMethod)
12:30:02.334 VERBOSE About try all encoders until we find one that works...
12:30:02.334 VERBOSE Hauppauge WinTV PVR PCI II Encoder
12:30:02.354 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
12:30:02.354 VERBOSE Pin mediums match...
12:30:02.374 VERBOSE using instance: 1
12:30:02.464 VERBOSE put_Mode(AMTUNER_MODE_TV)
12:30:02.464 VERBOSE put_CountryCode(1)
12:30:02.464 VERBOSE put_TuningSpace(1)
12:30:02.464 VERBOSE put_InputType(0, 0)
12:30:02.464 VERBOSE put_ConnectInput(0)
12:30:02.464 VERBOSE put_Channel(26, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
12:30:02.635 VERBOSE get_VideoFrequency() returns 235250000
12:30:02.635 VERBOSE get_CountryCode() returns 1
12:30:02.635 VERBOSE About to query available formats
12:30:02.645 VERBOSE ConexantRecorder::SetConfigurationECP()
12:30:02.655 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26032 Rev C182
Serial No: 2964406
Tuner[1]: Model 82 (LG TAPC_H791F)
Decoder: 28
AudioIC: 35
IR
Input Map: C= 0x000f, S= 0x0003
12:30:02.705 VERBOSE getSetting(EnableTeleText)
12:30:03.526 VERBOSE getSetting(ListGraphFilters)
12:30:03.526 VERBOSE Graph contains the following filters:
12:30:03.526 VERBOSE - GB-PVR Writer
12:30:03.526 VERBOSE - Encoder
12:30:03.526 VERBOSE - Capture
12:30:03.526 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
12:30:03.526 VERBOSE - TV Audio
12:30:03.526 VERBOSE - TV Tuner
12:30:03.526 VERBOSE getSetting(SaveGraphFiles)
12:30:03.526 VERBOSE ConexantRecorder::StartRecording() done
15:00:00.082 VERBOSE ConexantRecorder::StopRecording()
15:05:12.371 VERBOSE ConexantRecorder::StartRecording(1, 1, 141, 0)
15:05:12.402 VERBOSE Capture Device is based on BlackBird architecture
15:05:12.402 VERBOSE Capture Device is using Conexant (derived) drivers
15:05:12.402 VERBOSE Loading filter names
15:05:12.402 VERBOSE Found names:
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II Capture
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
15:05:12.412 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
15:05:12.682 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
15:05:12.692 VERBOSE Looking for encoder filter
15:05:12.702 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
15:05:12.712 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
15:05:12.712 VERBOSE getSetting(AutoDetectEncoderMethod)
15:05:12.712 VERBOSE About try all encoders until we find one that works...
15:05:12.712 VERBOSE Hauppauge WinTV PVR PCI II Encoder
15:05:12.732 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
15:05:12.732 VERBOSE Pin mediums match...
15:05:12.742 VERBOSE using instance: 1
15:05:12.802 VERBOSE About to query available formats
15:05:12.802 VERBOSE ConexantRecorder::SetConfigurationECP()
15:05:12.802 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26032 Rev C182
Serial No: 2964406
Tuner[1]: Model 82 (LG TAPC_H791F)
Decoder: 28
AudioIC: 35
IR
Input Map: C= 0x000f, S= 0x0003
15:05:12.852 VERBOSE getSetting(EnableTeleText)
15:05:13.673 VERBOSE getSetting(ListGraphFilters)
15:05:13.673 VERBOSE Graph contains the following filters:
15:05:13.673 VERBOSE - GB-PVR Writer
15:05:13.673 VERBOSE - Encoder
15:05:13.673 VERBOSE - Capture
15:05:13.673 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
15:05:13.683 VERBOSE getSetting(SaveGraphFiles)
15:05:13.693 VERBOSE ConexantRecorder::StartRecording() done
17:20:00.031 VERBOSE ConexantRecorder::StopRecording()
21:00:18.501 VERBOSE ConexantRecorder::StartRecording(1, 1, 5, 0)
21:00:26.222 VERBOSE Capture Device is based on BlackBird architecture
21:00:26.222 VERBOSE Capture Device is using Conexant (derived) drivers
21:00:26.222 VERBOSE Loading filter names
21:00:26.222 VERBOSE Found names:
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II Capture
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
21:00:26.222 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
21:00:32.722 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
21:00:36.287 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
21:00:36.617 VERBOSE Looking for encoder filter
21:00:36.878 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
21:00:37.098 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
21:00:37.098 VERBOSE getSetting(AutoDetectEncoderMethod)
21:00:37.278 VERBOSE About try all encoders until we find one that works...
21:00:37.278 VERBOSE Hauppauge WinTV PVR PCI II Encoder
21:00:37.559 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000
21:00:37.559 VERBOSE Pin mediums match...
21:00:38.660 VERBOSE using instance: 1
21:00:39.602 VERBOSE put_Mode(AMTUNER_MODE_TV)
21:00:39.602 VERBOSE put_CountryCode(1)
21:00:39.642 VERBOSE put_TuningSpace(1)
21:00:39.662 VERBOSE put_InputType(0, 0)
21:00:39.662 VERBOSE put_ConnectInput(0)
21:00:39.662 VERBOSE put_Channel(5, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
21:00:39.922 VERBOSE get_VideoFrequency() returns 77250000
21:00:39.922 VERBOSE get_CountryCode() returns 1
21:00:39.962 VERBOSE About to query available formats
21:00:40.022 VERBOSE ConexantRecorder::SetConfigurationECP()
21:00:40.122 INFO Firmware Version 2.5.32
Audio Firmware Version 1.4.42
Model 26032 Rev C182
Serial No: 2964406
Tuner[1]: Model 82 (LG TAPC_H791F)
Decoder: 28
AudioIC: 35
IR
Input Map: C= 0x000f, S= 0x0003
21:00:40.423 VERBOSE getSetting(EnableTeleText)
21:00:42.516 VERBOSE getSetting(ListGraphFilters)
21:00:42.516 VERBOSE Graph contains the following filters:
21:00:42.546 VERBOSE - GB-PVR Writer
21:00:42.546 VERBOSE - Encoder
21:00:42.546 VERBOSE - Capture
21:00:42.566 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
21:00:42.566 VERBOSE - TV Audio
21:00:42.566 VERBOSE - TV Tuner
21:00:42.566 VERBOSE getSetting(SaveGraphFiles)
21:00:42.566 VERBOSE ConexantRecorder::StartRecording() done
22:00:00.161 VERBOSE ConexantRecorder::StopRecording()
Any suggestions? Is there anything I can do to make sure I don't miss other reoccurring recordings short of must making sure they appear as Pending the day they are due?
Thanks,
Tim