Nebula won't find channels

cplevin · 2006-03-27, 11:33 AM

GB-PVR looks great, but can't tune this Nebula card. The Nebula software and drivers detect all channels OK, but after removing the nebula drivers and replacing with their BDA drivers GB-PVR won't find any channels. The card is detected and BDA drivers selected, but the tuning process(All regions all channels) detects nothing.

I'm using the latest versions of GB-PVR and the Nebula BDA drivers, running on an Athlon 1.8.

Any help greatly appreciated!

Chris

stefan · 2006-03-27, 11:38 AM

You might have to change <scanBDAtype> (or something similar to that) in config.xml to 2...

***sub*** · 2006-03-27, 04:46 PM

can you do a scan, then zip and attach your logs?

herbs · 2006-03-27, 06:33 PM

Maybe a stupid question but are you actually using the BDA drivers as the standard Nebula drivers are not BDA, if so you will have to download them from the nebula site.

cplevin · 2006-03-28, 12:13 AM

OK sub, will do that. herb, yes they are the BDA drivers, as per my posting, I checked the card functionality with the Nebula native drivers and software, then uninstalled these and installed the BDA drivers, which show up OK in device manager and the GB-PVR software. The card is detected OK and so on.

Ok, will try another scan and save the logs. I'm just about to try some customised drivers too.

Chris

cplevin · 2006-03-28, 12:53 AM

Here's the zipped config.exe log following a scan. What other logs are relevant?

I tried changing bdascantype value to 2 as suggested with no change to results.

I only did a short scan on the Crystal Palace xmitter, a full scan gives same results.

Please let me know which other logs would be useful.

Chris

cplevin · 2006-03-30, 10:46 PM

Can no-one help with this?

Sub - log posted, any ideas?

TIA

Chris

***sub*** · 2006-03-31, 01:13 AM

Sorry I didnt respond. I did read the logs, but got side tracked and forgot to respond. Unfortunately I couldnt see any obvious cause in the logs.

herbs · (This post was last modified: 2006-03-31, 08:41 AM by herbs.)

Just had a thought there is an issue with the driver 1.0.3.6 with tuning in the UK try the earlier version or try http://www.digitv-forum.co.uk/viewtopic.php?t=1706 which is what I use as it works after hibernate/suspend mode.

cplevin · 2006-04-01, 12:18 AM

Thanks for your attempts at solving this - herb I've already tried these drivers with no luck. Maybe I'll try older BDA drivers.

Chris

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	no EPG for two channels	JimPletcher	5	4,490	2019-08-15, 09:53 PM Last Post: jobby99
	Locking in QAM Channels	highestbid	8	6,949	2014-03-12, 03:10 AM Last Post: highestbid
	Need help remapping Channel guide and actual channels	divinehammer	3	3,535	2012-01-20, 10:43 AM Last Post: kayleigh
	Two Channels Without Video	skycyclepilot	5	3,185	2011-10-29, 07:49 PM Last Post: sub
	No sound for French DVB-T H264 channels with E-AC3 tracks	jorionpi	7	4,364	2011-06-26, 01:25 AM Last Post: sub
	Problem with GB-PVR - Cannot Watch Channels and Administrator Problem	Greg Smith	10	4,079	2011-05-22, 05:09 PM Last Post: sub
	no channels found - XP x64 bit edition fresh install	8ace	3	1,746	2011-02-10, 01:27 AM Last Post: 8ace
	Missing Channels In Listings?	hollow5555	4	2,029	2011-01-10, 05:53 PM Last Post: hollow5555
	No QAM channels being retrieved with HVR-2250	Misko5	4	2,117	2011-01-01, 01:45 AM Last Post: Snooze
	mc2xml Digital Channels	235301	8	4,970	2010-12-30, 05:12 PM Last Post: joseosoria