Blank Screen?

[the200lbdyck]

I have 3 different lines running to my Hauppauge 250 w/Fm. When I run GBPVR channnel guide program or whatever it is called, I do get a signal on channel three as expected. So when I attempt to get it running through GBPVR live TV, I have tried using the three different composite in the S-videos and the direct line and still cannot get a picture. Any ideas. I am sure that you are going to say that I don't have it configured correctly or have the wrong card selected. So lets skip the wrong card idea so I will take any help offered. Thanks.

[sub]

What exactly do you mean by 3 lines? Are you saying you're trying to use the internal tuner and composite and svideo? If so, how about you add the capture sources one at a time and test them as you go. When you try this, if it doesnt work for you, post a detailed description of how you've setup your capture sources (card type, board #), and the EPG details (where you get the channel list for each), and I'll see if I can offer any advice.

[the200lbdyck]

Sub, thanks for all the help that you provide through this forum. Okay I did what you asked and I attempted one at a time. I did the composite video first. My card configuration is for the hauppauge 250 w/FM capture device #1 and composite 1. tHen I tried Composite 2 and then three all of them produced blank screens. I then tried fixed channel external tuner. That one also produced a blank screen. I am using zap2it to get the channels. If you need anything else let me know.

[sub]

zip and attach your logs and I'll take a look.

[the200lbdyck]

log posted

[sub]

"logs" as in 'all your log files'

[the200lbdyck]

all log files

[sub]

What MPEG2 decoders do you have listed in the 'video decoders' setting in the config app?

Also, you should set your deinterlacing to 'encoder pass through'.

[the200lbdyck]

Ok

For the MPEG2 encoders i have
software default
PVR350
Sigma Design XCard

I get the following message under live TV on the PVR350 and Sigma encoder setting

Video is playing back using TV Out

[dottore]

open config.xml with notepad and search for 'video decoders', thats the information sub needs ;-) not the encoders.