Can't find any SAT channels with HVR4000

[mcreek]

I can't find any SAT channels with my 2x hauppauge HVR4000.
With CyberLink PowerCinema 5.1 (came with HVR4000 card) i can find and watch every channel incl. HD channels.
When i press "Map digital channels to EPG channels" then i get a messagebox "DirectVobSub: IPersistStream is no longer supported" after some seconds.
Then GB-PVR scans for channels but can't find any.
I Attached all logs.

Please help.

Here my configuration:

PC:
Motherboard P5GDC-V Deluxe
2x Hauppauge HVR4000
P4 2,8 GHz
1GB RAM
MSI NX7900GS (T2D256EZ)
SATA HDs
WinXP SP2
GB-PVR v1.1.5
--------------------------------------------------------------------------

LNB:
Inverto Universal Quattro IDLP-401QTL+
http://www.inverto.tv
Input Frequency (GHz): 10.7-11.7, 11.7-12.75
L.O Freq (GHz): 9.75/10.6
Polarization: Linear
Accur.&stab.+Mhz (@25C): +/- 1
LNB Gaint (typ.) dB: 50-65
Gain Flatness: 0.75dB@36MHz max
7db@IF p-p max
Pol. & Freq. Band control: 13/18v 22Khz (standard)
Gain Stability: N/A
Phase Noise (dBc/Hz): @ 1 KHz - 50
@ 10 KHz - 75
@ 100 KHz -95
Image Rejection (dBm): -40
Spurious (dBc): -60
1db compr. Point (min., dBm): 0
Output Connector: 75 ohm - "F" Female
Operation Temerature (oC): -30 to +60
F/D of feed: 0.6 - 0.7
--------------------------------------------------------------------------

Multiswitch 6x:
Spaun SMS 5602 NF
http://www.spaun.de
--------------------------------------------------------------------------

GB-PVR Capture Source Settings:
Both HVR4000 configured equal.
Recording Source: BDA Recording Plugin
EPG Source: configured and imported
Channel Changer: No Channel Changer Required
--------------------------------------------------------------------------

Settings of BDA Recording Plugin:
Device Type: Hauppauge HVR-4000 (DVB-S/S2)
Type: DVB-S
Country: All Countries
Region/Transm.: Astra 1E, 1F, 1G, 1H, 1KR, 2C
LNB LOF1 (MHz): 9750
LNB Switch (MHz): 11700
LNB LOF2 (MHz): 10600
Powerd: yes
DiSEqC: NONE
BDA Advanced Settings: default (none checked)

[sub]

LNB LOF1 (MHz): 950
LNB Switch (MHz): 11700
LNB LOF2 (MHz): 2200

Those LOF1/LOF2 values look dodgy to me, but I could be wrong.

[sub]

When i press "Map digital channels to EPG channels" then i get a messagebox "DirectVobSub: IPersistStream is no longer supported"

That wont cause any problems itself but you can stop it one of two ways. Either uninstall DirectVobSub, or set <SaveGraphFiles>false</SaveGraphFiles> in config.xml.

[mcreek]

Sorry, i meant the default DVB-S LNB Settings:
LNB LOF1 (MHz): 9750
LNB Switch (MHz): 11700
LNB LOF2 (MHz): 10600

[sub]

Try doing a scan then zip and attach the config.exe.log and config.exe-native.log and I'll see if anything stands out.

[mcreek]

Thanks sub fo the quick response.
Im using your great GB-PVR since 2 years with PVR350/150 via cable but now i have to change to SAT.

On the scan dialog i get the info:
"SCANNING ... of 76 (Strength: 0 Quality: 0)"
seems there is no signal, but CyberLink PowerCinema can still show the channels.

Here the logs of a new scan.

[sub]

2007-12-30 21:59:04.478 VERBOSE Graph contains the following filters:
2007-12-30 21:59:04.478 VERBOSE - Default DirectSound Device
2007-12-30 21:59:04.478 VERBOSE - MPEG Video Decoder
2007-12-30 21:59:04.478 VERBOSE - BDA MPEG2 Transport Information Filter
2007-12-30 21:59:04.478 VERBOSE - MPEG-2 Sections and Tables
2007-12-30 21:59:04.478 VERBOSE - GB-PVR PSI Parser
2007-12-30 21:59:04.478 VERBOSE - VMR9
2007-12-30 21:59:04.478 VERBOSE - Hauppauge WinTV 88x DVB-S/S2 Tuner/Demod
2007-12-30 21:59:04.478 VERBOSE - AC3Filter
2007-12-30 21:59:04.478 VERBOSE - DirectVobSub (forced auto-loading version)
2007-12-30 21:59:04.478 VERBOSE - Microsoft DVBS Network Provider
2007-12-30 21:59:04.478 VERBOSE - MPA Decoder Filter
2007-12-30 21:59:04.478 VERBOSE - MPV Decoder Filter
2007-12-30 21:59:04.478 VERBOSE - MPEG-2 Demultiplexer
2007-12-30 21:59:04.478 VERBOSE - Hauppauge WinTV 88x TS Capture

The order of these filters is different than what you'd normally see, so I'm guessing the device not be hooking up correctly for some reason.

You could check by creating the following registry setting:

HKEY_LOCAL_MACHINE\Software\Devnz\AddGraphToROT=1(DWORD)

The do a scan. While scanning run GraphEdit (google for it), then select the 'connect to remote graph' menu option to view the graph being used. If you can post a screenshot of this it will let me know how these filters are connected up.

[mcreek]

Here is the screenshot of graphedit during channelscan.

[sub]

Ok, thats not right, and tallies up with the odd filter order in the logs.

For some reason the app seems to be unable to connect the to Hauppauge BDA filters together. This would often happen if the device is in use in another application. I'd take a close look at the other software you have installed.

[mcreek]

How should the graph be looking?
Which pins should be connected?