Black screen after resuming from standby

[erik]

After I upgraded to 1.1.5 I do get a black screen after resuming from standby.
I run in VMR9 full screen
Killing pvrx2 (CTRL+ALT+DEL does pop up the task manager window) and restarting pvrx2 solves the problem

The pvrx2 native log shows some errors

[COLOR="Blue"]2008-01-27 11:21:00.000 VERBOSE SetRenderList updating texture
2008-01-27 11:21:00.000 VERBOSE About to update 16128 pixels
2008-01-27 11:21:19.265 INFO System is going to low power state...

--------> This is when the system goes to standby and wakes up again.

2008-01-27 11:23:40.500 VERBOSE SetRenderList updating texture
2008-01-27 11:23:40.500 VERBOSE About to update 16128 pixels
2008-01-27 11:23:40.500 VERBOSE m_pD3DDev->Present() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost

2008-01-27 11:23:40.500 VERBOSE device lost
2008-01-27 11:23:43.671 INFO System is waking from low power state...
2008-01-27 11:23:48.500 VERBOSE m_pD3DDev->Present() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost

2008-01-27 11:23:48.500 VERBOSE device lost
2008-01-27 11:23:48.500 VERBOSE not reset
2008-01-27 11:23:48.500 VERBOSE DeleteSurfaces
2008-01-27 11:23:48.500 VERBOSE CreateDevice() = 3
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderX1)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderX2)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderY1)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderY2)
2008-01-27 11:23:49.015 ERROR hr failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost

2008-01-27 11:23:49.015 ERROR CreateDevice() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost

2008-01-27 11:24:25.218 VERBOSE DirectShowPlayerBase:top
2008-01-27 11:24:25.218 VERBOSE DirectShowPlayerBase:top finished
2008-01-27 11:24:25.218 VERBOSE Allocator shutdown...
2008-01-27 11:24:25.218 VERBOSE texture cache now has 0 textures
2008-01-27 11:24:25.218 VERBOSE DeleteSurfaces

[/COLOR]
Detailed pvrx2 logs attached
Any suggestions?

[dark_half]

Do not know if this will help but you might have a look here
http://forums.nextpvr.com/showthread.php?t=28654

On post 39 sub points to a fix here
http://forums.gbpvr.com/showpost.php?p=2...stcount=11

[sub]

Yeah, I'd try that <FSERestartImmediately> setting mentioned in that post.

[erik]

testing...................... (waiting for automatic standby)

[erik]

No good.
Seems like the D3D device is lost even before the PC goes to standby
As soon as I switch off the TV the device is lost.
The strange thing is that when the PC is in standby the logging seems to continue.
I am now testing if the standby/wakeup cycle works when the TV remains on.

Does anyone know how to prevent the device loss when a display is disconnected (or switched off)???

[sub]

Post the logs covering the time before&after when the PC went into standby and I'll check thats correctly restarting the app.

[erik]

OK, here it is.
I inserted the <FSERestartImmediately> in the config.xml file

The TV remained on this time.
Both pvrx2 log files attached.

The interesting part seems to be.

[COLOR="Blue"]2008-01-27 19:40:00.000 VERBOSE About to update 16128 pixels
2008-01-27 19:41:00.000 VERBOSE SetRenderList updating texture
2008-01-27 19:41:00.000 VERBOSE About to update 16128 pixels
2008-01-27 19:42:00.000 VERBOSE SetRenderList updating texture
2008-01-27 19:42:00.000 VERBOSE About to update 16128 pixels
2008-01-27 19:42:25.593 INFO System is going to low power state...
2008-01-27 19:42:42.750 INFO System is waking from low power state...
2008-01-27 19:42:42.750 VERBOSE m_pD3DDev->Present() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost

2008-01-27 19:42:42.750 VERBOSE device lost
2008-01-27 19:42:42.750 VERBOSE not reset
2008-01-27 19:42:42.750 VERBOSE DeleteSurfaces
2008-01-27 19:42:42.750 VERBOSE CreateDevice() = 3
2008-01-27 19:42:42.750 VERBOSE getSetting(OverScanBorderX1)
2008-01-27 19:42:42.750 VERBOSE getSetting(OverScanBorderX2)
2008-01-27 19:42:42.750 VERBOSE getSetting(OverScanBorderY1)
2008-01-27 19:42:42.750 VERBOSE getSetting(OverScanBorderY2)
2008-01-27 19:42:43.250 ERROR hr failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost

2008-01-27 19:42:43.250 ERROR CreateDevice() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost

2008-01-27 19:43:57.453 VERBOSE DirectShowPlayerBase:top
2008-01-27 19:43:57.453 VERBOSE DirectShowPlayerBase:top finished
2008-01-27 19:43:57.453 VERBOSE Allocator shutdown...
2008-01-27 19:43:57.453 VERBOSE texture cache now has 0 textures
2008-01-27 19:43:57.453 VERBOSE DeleteSurfaces
[/COLOR]

[sub]

Do you have the patches from the survival guide thread applied?

From memory the <FSERestartImmediately> thing wasnt available in the initial release, but was added soon after in one of the patches. I cant see any sign of this setting being checked, which makes me think you have an older version of PVRX2.exe which doesnt use it.

[erik]

I did not install the latest patch of pvxr2.exe as I did not see the "On screen OSD TV Guide staying on screen after selecting to 'watch another channel'" error
Will try now
Sorry to bother you, should have tried myself.

[sub]

No worries - give it a go.