[DVB-T] Gigabyte GT-U7000-RH

[nwagenaar]

I managed to get my Gigabyte GT-U7000-RH DVB-T USB reciever detectable using the following lines in the DVB.ini:

Code:

[Gigabyte GT-U7000-RH]
TUNING_TYPE=DVB-T
FILTER_TUNER="DiBcom BDA Digital Tuner (Dev1 Path0) "
FILTER_CAPTURE="DiBcom BDA Digital Capture (Dev1 Path0) "
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

I then created a new INI for my provider (Digitenne) in my region (Zwolle):

Code:

[TERTYPE]
1=Netherlands
2=Zwolle
[DVB]
0=4
1=C22,482000,0,0,8
2=C65,826000,0,0,8
3=C23,490000,0,0,8
4=C47,682000,0,0,8

But, when scanning the quality and signal is allways 0 and nothing is detected. I know for 100% sure that everything is right, mainly since other apps seem to get channels using the same config

Am I missing something in my BDA.ini config?

[sub]

Can you try a scan then post the config.exe.log and config.exe-native.log files?

[nwagenaar]

Here you go! Thanks for the effort

[sub]

According to the logs, everything looks ok, but the device never manages to lock onto a signal.

What is <BDAAutoScan166KHzOffset> set to in your config.xml file?

[nwagenaar]

According to the logs, everything looks ok, but the device never manages to lock onto a signal.

What is <BDAAutoScan166KHzOffset> set to in your config.xml file?

Concerning the no lock, that seems correct since the signal and quality is 0.

Concerning the option, I wouldn't know. I didn't put it there by myself. I only use the Config-tool delivered by GB-PVR

[sub]

Can you check the config.xml to see?

[nwagenaar]

Ok, I've disabled and removed the setting. No avail, still nog lock (logs-out seem to be the same) and there for no signal/quality.

[nwagenaar]

It's been a while, but I decided to test GB-PVR again on my newly installed Vista 32-bits HTPC. Currently, I still encounter the same problems with my Gigabyte GT-U7000-RH DVB-T USB stick. The Strength and Quality is still 0 and I don't seem to get a lock on DVB-T frequencies.

I tested the stick with other DVB-software as well. And they are able to get a lock and show me channels. However, most of these software suck and aren't real HTPC based software

I've enclosed a Graphedit of the stick. BTW, the config tool detected it without problems.