What Am I missing?

[Howry]

Hardware:
Opteron 165 Overclocked to 2.2 Ghz
2 Gigs Corsair Ram
Hauppauge HVR1600
Ati Radeon 2600 Pro


I just reformated and reinstalled everything and now im getting the error message "Sorry, this system does not support the Required VMR9 Video Renderer."

I have Direct X 9.0C installed, The most recent video card drivers, Net Framework 2.0 as well as the most recent runtime.

I then installed the newest version of GBPVR.
I setup my Tuner Card Via Config/Capture Source, I pull all the channels and such.

My Current Video Decoder is Intervideo, although I have tried several others as well. If I try and load the program while my renderer is set to VMR9 it will not load, if I set it to overlay manager I can get into it and see picture etc.

I did have PowerDVD/Cyberlink on the system but have since uninstalled it. I also have the Klite Codec pack currently on the system.

What am I missing? I figure it must be something simple as Ive had the program up and running before with VMR9.

The following is what my log is stating.

2008-05-29 23:13:42.796 VERBOSE [1] getValue() loading new key/value into cache: /settings/RendererX2
2008-05-29 23:13:42.796 VERBOSE [1] getValue: /settings/RendererX2 : VMR9 Custom
2008-05-29 23:13:42.812 VERBOSE [1] getValue cached value: /settings/RendererX2 : VMR9 Custom
2008-05-29 23:13:42.812 VERBOSE [1] getValue cached value: /settings/RendererX2 : VMR9 Custom
2008-05-29 23:13:44.187 ERROR [1] Shutting down due to error (probably no VMR9 support): System.Runtime.InteropServices.SEHException: External component has thrown an exception.
at GBPVRX2.x0061b801bdf12d35..ctor(Boolean animate, String directStartTask)
at GBPVRX2.xb979ad394703258e.xfb409e85bd292293(String[] xf18a926310372520)

And this is the other log

2008-05-29 23:13:42.843 VERBOSE getSetting(StartOnSecondMonitor)
2008-05-29 23:13:42.843 VERBOSE Using default monitor
2008-05-29 23:13:42.843 VERBOSE getSetting(VMR9LockBackBuffer)
2008-05-29 23:13:42.843 VERBOSE getSetting(CropVBI)
2008-05-29 23:13:42.843 VERBOSE Able to SwitchD. Checking for VMR9 support.
2008-05-29 23:13:42.890 VERBOSE DirectShowPlayerVMR9Custom()...VMR9 not supported
2008-05-29 23:13:42.890 VERBOSE DeleteSurfaces
2008-05-29 23:13:42.890 VERBOSE DirectShowPlayerBase destructor called...


Thanks for any help you can offer.

[Howry]

Also when in Overlay mode after 3-4 min or so the Video starts to get all choppy and eventually grinds to a halt. This has been an ongoing problem ive had with the newer UI. Anyone else having this problem? Ive tried different drivers atleast 10 different going back to late 2006. Ive defragged, tried about 20 different Codec etc. This only happens with Live TV. If im watching a movie or anything its fine.

If anyone has any ideas on this as well it would be appreciated.

Thanks!

-Andy

[stustunz]

are you using encoder pass through
and where do you have your temp live tv folder you could try moving that to another hard drive

[Howry]

I will give those things a try.

Thanks!

[pBS]

i would reinstall video driver...sounds like something didn't take...
[usually a dx9 update helps that]

how about the vc update? [on survival guide]
i usually forget about that one on fresh installs..

[Howry]

I have reinstalled my Video Card drivers and that fixed the not able to get VMR9 to work. Thanks much!

What is this VC update?

Either im not sure what im looking for but i looked in v1.2.13 survival guide and maybe just missed it?

VC=Video Card?

Appreciate all the help! Thank you