ehome infrared receiver

offrotor · 2008-12-30, 07:37 PM

I have been looking for a solution to this problem for days now...

I have got a HVR 1800 MCE Kit and a pvr 150 card.
The kit comes with the "beanbag" receiver and option to run 2 ir blasters.

I have 2 Sat. receivers that I want to change channels on. Problem is, only the #2 port blaster works. #1 seems dead. I have tried Girder,Hip, and every combo of the replacement drivers for the MCE remote.

Pouring over 100's of posts, and many forums, looks like I'm not the only one stuck with this problem?

When I got the pvr150 card way back, it too was a "MCE Kit" back then I tried to use the #1 blaster port and it didn't work. I just used #2 with no problem, since I only had one sat. box.

So, could this be a hardware issue? Both my old "Kit" and my new "Kit" don't seem to be blasting on port #1.

I am running XP pro. latest PVRx2.

zehd · 2008-12-30, 08:25 PM

offrotor Wrote:I have been looking for a solution to this problem for days now...

I have got a HVR 1800 MCE Kit and a pvr 150 card.
The kit comes with the "beanbag" receiver and option to run 2 ir blasters.

I have 2 Sat. receivers that I want to change channels on. Problem is, only the #2 port blaster works. #1 seems dead. I have tried Girder,Hip, and every combo of the replacement drivers for the MCE remote.

Pouring over 100's of posts, and many forums, looks like I'm not the only one stuck with this problem?

When I got the pvr150 card way back, it too was a "MCE Kit" back then I tried to use the #1 blaster port and it didn't work. I just used #2 with no problem, since I only had one sat. box.

So, could this be a hardware issue? Both my old "Kit" and my new "Kit" don't seem to be blasting on port #1.

I am running XP pro. latest PVRx2.

Of course it sounds too suspcious to be sure, but I had the same problem on port one of a Hauppauge beanbag...

So that's three that I know of, so it sounds like a software configuration issue.

But I didn't scratch my head for too long. The MS version of the remote beanbag and blasters is dirt cheap, and headache free

zed · 2008-12-30, 09:01 PM

zehd Wrote:Of course it sounds too suspcious to be sure, but I had the same problem on port one of a Hauppauge beanbag...

So that's three that I know of, so it sounds like a software configuration issue.

But I didn't scratch my head for too long. The MS version of the remote beanbag and blasters is dirt cheap, and headache free

Same for me...only #2 worked. I got the unit with a PVR-500.

Ditto the MS blaster...works great and can be had pretty cheaply.

dark_half · 2008-12-30, 10:39 PM

Have you tried IR Server? I will have to check but I am pretty sure I am using port#1 on the MCE kit that came with my PVR-150. I am not using the replacement drivers though. I did the registry edit because it allowed me to still use my remote to bring the PC out of standby.

zehd · 2008-12-30, 11:10 PM

dark_half Wrote:Have you tried IR Server? I will have to check but I am pretty sure I am using port#1 on the MCE kit that came with my PVR-150. I am not using the replacement drivers though. I did the registry edit because it allowed me to still use my remote to bring the PC out of standby.

Yeah IR Server Suite may work, but I gave up on the Haup Beanbag before IR Server came out...

dark_half · 2008-12-31, 12:01 AM

I did confirm that both ports on the ehome receiver I got with my PVR-150MCE work using IR Server and the default drivers with the registry edit. However I am using Vista but I am fairly sure that I had the same setup working under xp pro before switching.

offrotor · (This post was last modified: 2008-12-31, 12:16 AM by offrotor.)

No luck with IR Server.

What would a part number be for a MS blaster? maybe I can get my hands on one.

From what I have read, the blaster problem is non existent in Vista.

Thanks for the help. ----------------yet, more hardware to buy........................

dark_half · 2008-12-31, 03:02 AM

I am pretty sure the key part is to use the original ehome driver and not one of the replacement drivers. I think this is what fixed it for me when I was using XP.

offrotor · 2009-01-02, 10:09 PM

Tried all this.... Still no luck.

Etacovda · 2009-01-03, 07:38 AM

id say it software, mine did the same thing - however, i forget what fixed it

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	USB IR Receiver for Harmony Remote	SNielson	1	2,132	2018-04-23, 09:33 AM Last Post: Graham
	Microsoft eHome Infrared Tranceivers & IR Blasting	meccano	0	2,453	2016-07-22, 01:32 PM Last Post: meccano
	USB receiver for FreeSat	Bathman	3	2,936	2014-12-23, 11:04 PM Last Post: haverer2
	Help: MCE IR Receiver/Blaster setup	hoopsdavis	4	3,756	2012-12-14, 01:20 AM Last Post: hoopsdavis
	Manta USB IR receiver and blaster	jam_zhou	2	2,192	2012-12-05, 09:50 PM Last Post: JonnyCam
	Trying to get my MCE IR Receiver/Blaster to send different info to each blaster port	kshaet	7	4,156	2012-12-05, 03:58 AM Last Post: jam_zhou
	pvr 150 ir blaster+IR receiver work on HDPVR?	jam_zhou	1	1,766	2012-11-06, 04:39 PM Last Post: jam_zhou
	Oct 18th: $59 for new Hauppauge DCR-2650 Dual-Tuner Cable Card Receiver	wtg	6	2,724	2012-10-18, 11:13 PM Last Post: pcostanza
	MCE USB IR receiver wont let PC standby.	fuzzweed	2	1,937	2012-05-12, 07:17 AM Last Post: imilne
	repairing Hauppauge IR Receiver	huck	4	2,649	2011-12-03, 09:37 PM Last Post: huck