Resolved: I did not copy the NetworkRecorder.dll to the c:/Users/Public/NPVR/Plugins/NetworkRecorder directory.
I am sadly in a similar situation. I can't get my Ceton InfiniTV PCIe tuners to show up in NPVR. New install, Windows 7 ultimate, 64-bit, no other tuners. I verified that tuner works via Winbloze Media Center. I Stopped every Media Center service. I used SageDCT to configure. I copied the NetworkRecorder.dll to c:\Users\Public\NPVR. I created the c:\Users\Public\NPVR\Plugins\NetworkRecorder directory and created the NetworkRecorder.xml file in this new NetworkRecorder directory. I copied over my npvr.db3 with empty.db3. I have tried different port numbers in the .xml file, but still no luck. Everything is running locally.
The wiki and guide that is mentioned above is useful, but there are a few details that require some guesswork for a newbie. One thing that would be nicer is larger images. I just can't read those port numbers (no, they shouldn't be important, unless you are trying to figure out why you can't get yours to work). I'll see if I can contribute to improve on these once I figure out how to get it working.
My SageDCT Config uses the default ports, etc.:
Encoder Start Port: 6970
RTP Start Port: 5010
Tuner1: 6980
Tuner2: 6985
Tuner3: 6982
Tuner4: 6989
Using SageDCT I could test talking to my tuners. (I had to fix a permissions issue with the service before it would communicate with the service).
My NetworkConfig.xml: (I tried using port 6969, 6970, 6980)
<?xml version="1.0"?>
<Settings>
<PluginSettings>
<NetworkRecorder>
<FriendlyName>Graph Recorder</FriendlyName>
<host>127.0.0.1</host>
<port>6969</port>
<delay>2000</delay>
</NetworkRecorder>
</PluginSettings>
</Settings>
The NPVR.log is not very interesting (at least to me):
[...startup]
2012-11-17 13:47:52.725 [DEBUG][1] Created mutex. Must be only instance.
2012-11-17 13:47:52.914 [DEBUG][1] Version: 2.5.9
2012-11-17 13:47:52.915 [DEBUG][1] SingleInstance()
2012-11-17 13:47:53.088 [INFO][1] About to connect to remote recording service
2012-11-17 13:47:53.102 [DEBUG][1] RecordingServiceProxy@exit
2012-11-17 13:47:53.145 [DEBUG][1] Using skin: C:\Users\Public\NPVR\skin\Default\
2012-11-17 13:47:53.157 [DEBUG][1] About to look for plugin directories in: C:\Users\Public\NPVR\Plugins\
2012-11-17 13:47:53.157 [DEBUG][1] Skipping non-existant plugin directory: C:\Program Files (x86)\NPVR\Plugins\
2012-11-17 13:47:53.168 [DEBUG][1] Loaded menu item: TV Guide
2012-11-17 13:47:53.210 [DEBUG][1] Loaded menu item: Recordings
2012-11-17 13:47:53.213 [DEBUG][1] Loaded menu item: Live TV
2012-11-17 13:47:53.215 [DEBUG][1] Loaded menu item: Search
2012-11-17 13:47:53.217 [DEBUG][1] Loaded menu item: Videos
2012-11-17 13:47:53.219 [DEBUG][1] Loaded menu item: DVD
2012-11-17 13:47:53.221 [DEBUG][1] Loaded menu item: Exit
2012-11-17 13:47:53.565 [DEBUG][1] Supports HardwareVertexProcessing
2012-11-17 13:47:53.565 [DEBUG][1] Supports PureDevice
2012-11-17 13:47:57.956 [INFO][3] Checking online for updated versions...
2012-11-17 13:47:57.956 [INFO][3] Web@1
2012-11-17 13:47:58.562 [INFO][3] Online check reports version info:
<version><component name="NextPVR" version="2.5.9" display="NextPVR 2.5.9"><url>http://forums.nextpvr.com/showthread.php?52722-2-5-9-available-(1-October-2012)</url></component></version>
2012-11-17 13:47:58.562 [INFO][3] current online version: 2.5.9
2012-11-17 13:47:58.562 [INFO][3] last notified version: 2.5.9
2012-11-17 13:48:00.313 [DEBUG][1] About to detect digital tuners
2012-11-17 13:48:00.342 [DEBUG][1] About to check for HDPVR/Colossus/Siena tuners.
2012-11-17 13:48:00.353 [DEBUG][1] About to check for analog tuners
2012-11-17 13:48:00.392 [DEBUG][1] FindFilterByName failed to locate filter: MainConcept (HCW) MPEG Multiplexer-Plus
2012-11-17 13:48:00.392 [DEBUG][1] MainConcept mux not present. Disabling analog support.
2012-11-17 13:48:04.333 [DEBUG][1] storing Position (1):761,170
2012-11-17 13:48:04.333 [DEBUG][1] storing Size (1):789,521
2012-11-17 13:48:04.348 [INFO][1] Exiting...
2012-11-17 13:48:04.348 [INFO][1] Done.
The NRecord.log is similarly exciting:
[...startup]
2012-11-17 13:47:26.964 [DEBUG][4] OnStart()
2012-11-17 13:47:26.992 [INFO][4] Using local in-process recording service
2012-11-17 13:47:27.091 [DEBUG][4] RecordingServiceProxy@exit
2012-11-17 13:47:27.094 [INFO][4] RecordingService.Startup()
2012-11-17 13:47:27.094 [INFO][4] Starting remoting service
2012-11-17 13:47:27.130 [DEBUG][8] Requesting wake up for 'EPGWAKEUP' at 11/18/2012 2:00 AM
2012-11-17 13:47:27.156 [INFO][7] RecordingService starting...
2012-11-17 13:47:27.158 [DEBUG][7] PurgeOldDeletes()
2012-11-17 13:47:27.158 [DEBUG][7] Loading recording schedule
2012-11-17 13:47:27.165 [DEBUG][7] CancelAllWakeupRequests
2012-11-17 13:47:27.178 [INFO][4] Starting web server on: 8866
2012-11-17 13:47:27.178 [INFO][4] Setting working directory to: C:\Program Files (x86)\NPVR\
2012-11-17 13:47:27.178 [INFO][4] Web root: C:\Users\Public\NPVR\web
2012-11-17 13:47:28.158 [DEBUG][4] OnStart() complete...
2012-11-17 13:47:32.136 [DEBUG][9] Client Listener starting on port 7969
I do own SageTV, but it should be disabled on this machine. I have not read anywhere where SageDCT depends upon Sage to work.
Suggestions?
I am sadly in a similar situation. I can't get my Ceton InfiniTV PCIe tuners to show up in NPVR. New install, Windows 7 ultimate, 64-bit, no other tuners. I verified that tuner works via Winbloze Media Center. I Stopped every Media Center service. I used SageDCT to configure. I copied the NetworkRecorder.dll to c:\Users\Public\NPVR. I created the c:\Users\Public\NPVR\Plugins\NetworkRecorder directory and created the NetworkRecorder.xml file in this new NetworkRecorder directory. I copied over my npvr.db3 with empty.db3. I have tried different port numbers in the .xml file, but still no luck. Everything is running locally.
The wiki and guide that is mentioned above is useful, but there are a few details that require some guesswork for a newbie. One thing that would be nicer is larger images. I just can't read those port numbers (no, they shouldn't be important, unless you are trying to figure out why you can't get yours to work). I'll see if I can contribute to improve on these once I figure out how to get it working.
My SageDCT Config uses the default ports, etc.:
Encoder Start Port: 6970
RTP Start Port: 5010
Tuner1: 6980
Tuner2: 6985
Tuner3: 6982
Tuner4: 6989
Using SageDCT I could test talking to my tuners. (I had to fix a permissions issue with the service before it would communicate with the service).
My NetworkConfig.xml: (I tried using port 6969, 6970, 6980)
<?xml version="1.0"?>
<Settings>
<PluginSettings>
<NetworkRecorder>
<FriendlyName>Graph Recorder</FriendlyName>
<host>127.0.0.1</host>
<port>6969</port>
<delay>2000</delay>
</NetworkRecorder>
</PluginSettings>
</Settings>
The NPVR.log is not very interesting (at least to me):
[...startup]
2012-11-17 13:47:52.725 [DEBUG][1] Created mutex. Must be only instance.
2012-11-17 13:47:52.914 [DEBUG][1] Version: 2.5.9
2012-11-17 13:47:52.915 [DEBUG][1] SingleInstance()
2012-11-17 13:47:53.088 [INFO][1] About to connect to remote recording service
2012-11-17 13:47:53.102 [DEBUG][1] RecordingServiceProxy@exit
2012-11-17 13:47:53.145 [DEBUG][1] Using skin: C:\Users\Public\NPVR\skin\Default\
2012-11-17 13:47:53.157 [DEBUG][1] About to look for plugin directories in: C:\Users\Public\NPVR\Plugins\
2012-11-17 13:47:53.157 [DEBUG][1] Skipping non-existant plugin directory: C:\Program Files (x86)\NPVR\Plugins\
2012-11-17 13:47:53.168 [DEBUG][1] Loaded menu item: TV Guide
2012-11-17 13:47:53.210 [DEBUG][1] Loaded menu item: Recordings
2012-11-17 13:47:53.213 [DEBUG][1] Loaded menu item: Live TV
2012-11-17 13:47:53.215 [DEBUG][1] Loaded menu item: Search
2012-11-17 13:47:53.217 [DEBUG][1] Loaded menu item: Videos
2012-11-17 13:47:53.219 [DEBUG][1] Loaded menu item: DVD
2012-11-17 13:47:53.221 [DEBUG][1] Loaded menu item: Exit
2012-11-17 13:47:53.565 [DEBUG][1] Supports HardwareVertexProcessing
2012-11-17 13:47:53.565 [DEBUG][1] Supports PureDevice
2012-11-17 13:47:57.956 [INFO][3] Checking online for updated versions...
2012-11-17 13:47:57.956 [INFO][3] Web@1
2012-11-17 13:47:58.562 [INFO][3] Online check reports version info:
<version><component name="NextPVR" version="2.5.9" display="NextPVR 2.5.9"><url>http://forums.nextpvr.com/showthread.php?52722-2-5-9-available-(1-October-2012)</url></component></version>
2012-11-17 13:47:58.562 [INFO][3] current online version: 2.5.9
2012-11-17 13:47:58.562 [INFO][3] last notified version: 2.5.9
2012-11-17 13:48:00.313 [DEBUG][1] About to detect digital tuners
2012-11-17 13:48:00.342 [DEBUG][1] About to check for HDPVR/Colossus/Siena tuners.
2012-11-17 13:48:00.353 [DEBUG][1] About to check for analog tuners
2012-11-17 13:48:00.392 [DEBUG][1] FindFilterByName failed to locate filter: MainConcept (HCW) MPEG Multiplexer-Plus
2012-11-17 13:48:00.392 [DEBUG][1] MainConcept mux not present. Disabling analog support.
2012-11-17 13:48:04.333 [DEBUG][1] storing Position (1):761,170
2012-11-17 13:48:04.333 [DEBUG][1] storing Size (1):789,521
2012-11-17 13:48:04.348 [INFO][1] Exiting...
2012-11-17 13:48:04.348 [INFO][1] Done.
The NRecord.log is similarly exciting:
[...startup]
2012-11-17 13:47:26.964 [DEBUG][4] OnStart()
2012-11-17 13:47:26.992 [INFO][4] Using local in-process recording service
2012-11-17 13:47:27.091 [DEBUG][4] RecordingServiceProxy@exit
2012-11-17 13:47:27.094 [INFO][4] RecordingService.Startup()
2012-11-17 13:47:27.094 [INFO][4] Starting remoting service
2012-11-17 13:47:27.130 [DEBUG][8] Requesting wake up for 'EPGWAKEUP' at 11/18/2012 2:00 AM
2012-11-17 13:47:27.156 [INFO][7] RecordingService starting...
2012-11-17 13:47:27.158 [DEBUG][7] PurgeOldDeletes()
2012-11-17 13:47:27.158 [DEBUG][7] Loading recording schedule
2012-11-17 13:47:27.165 [DEBUG][7] CancelAllWakeupRequests
2012-11-17 13:47:27.178 [INFO][4] Starting web server on: 8866
2012-11-17 13:47:27.178 [INFO][4] Setting working directory to: C:\Program Files (x86)\NPVR\
2012-11-17 13:47:27.178 [INFO][4] Web root: C:\Users\Public\NPVR\web
2012-11-17 13:47:28.158 [DEBUG][4] OnStart() complete...
2012-11-17 13:47:32.136 [DEBUG][9] Client Listener starting on port 7969
I do own SageTV, but it should be disabled on this machine. I have not read anywhere where SageDCT depends upon Sage to work.
Suggestions?