Can't change channels in XBMC

[PeteyNice]

NextPVR: 2.6.2
XBMC: 12.2
XBMC Add-On: 1.6.4
TimeShift: Never enabled
Windows: 8 Professional
HDHR Prime


Everything is cool in the NextPVR app but in XBMC I cannot change channels. The initial channel will play fine. I have tried re-installing everything except Windows but no joy. Any advice is much appreciated!

[sub]

You'd probably have to reproduce the problem and post the xbmc.log, and the nrecord.exe/web.log files.

[PeteyNice]

OK.

If it means anything I am using the ATI MPEG Video decoders.

Here is the end of the XBMC.log

18:00:53 T:6600 NOTICE: Creating audio stream (codec id: 86019, channels: 6, sample rate: 48000, no pass-through)
18:00:53 T:7584 NOTICE: fps: 59.940060, pwidth: 704, pheight: 480, dwidth: 640, dheight: 480
18:00:53 T:7584 NOTICE: Display resolution DESKTOP : 1920x1080 @ 60.00 - Full Screen (16)
18:01:10 T:5704 NOTICE: PVRManager - PVR::CPVRManager:erformChannelSwitch - switched to channel 'WAGA'
18:01:10 T:5704 NOTICE: Creating Demuxer
18:01:16 T:5704 NOTICE: Opening video stream: 0 source: 256
18:01:16 T:5704 NOTICE: Opening audio stream: 1 source: 256
18:01:16 T:7584 WARNING: CDVDMessageQueue(video)::Get - asked for new data packet, with nothing available


My web.log makes it look like it should be working...

A lot of

2013-08-19 18:06:50.637 [DEBUG][12] about to read 50000 from location 172550000 (current length = 172659200)
2013-08-19 18:06:50.637 [DEBUG][12] About to send 50000 bytes
2013-08-19 18:06:50.638 [DEBUG][12] Sent 50000 bytes
2013-08-19 18:06:50.638 [DEBUG][12] <Files>
<Length>172714304</Length>
<File offset="0">D:\Hockey\live-WAGA-1472-2.ts</File>
<Duration>339688</Duration>
<Complete>0</Complete>
</Files>

2013-08-19 18:06:50.638 [DEBUG][12] about to read 50000 from location 172600000 (current length = 172659200)
2013-08-19 18:06:50.638 [DEBUG][12] About to send 50000 bytes
2013-08-19 18:06:50.638 [DEBUG][12] Sent 50000 bytes
2013-08-19 18:06:50.638 [DEBUG][12] <Files>
<Length>172714304</Length>
<File offset="0">D:\Hockey\live-WAGA-1472-2.ts</File>
<Duration>339688</Duration>
<Complete>0</Complete>
</Files>

2013-08-19 18:06:50.638 [DEBUG][12] about to read 50000 from location 172650000 (current length = 172659200)
2013-08-19 18:06:50.638 [DEBUG][12] Not all bytes read@1 (only got: + 9200). About to do second chance. (file: D:\Hockey\live-WAGA-1472-2.ts)
2013-08-19 18:06:50.638 [DEBUG][12] Waiting for file to grow. Segment position now 172659200, length now 172659200


And the nrecord log....

2013-08-19 18:01:10.585 [DEBUG][6] Executing: C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe 1311B1CA set /tuner0/vchannel 4
2013-08-19 18:01:10.625 [DEBUG][6] NIC: Intel® 82579V Gigabit Network Connection
2013-08-19 18:01:10.625 [DEBUG][6] Executing: C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe 1311B1CA set /tuner0/target rtp://192.168.1.107:36313
2013-08-19 18:01:10.626 [DEBUG][6] SetTarget@2
2013-08-19 18:01:10.626 [DEBUG][6] SetTarget
2013-08-19 18:01:10.626 [DEBUG][6] SetTarget@2
2013-08-19 18:01:10.754 [DEBUG][6] SetTarget@exit
2013-08-19 18:01:10.754 [DEBUG][6] stopping previous handle
2013-08-19 18:01:10.960 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:10.960 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:16.011 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:21.061 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:26.514 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:31.563 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:36.903 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:41.943 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:46.978 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:52.116 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:01:57.161 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:02.618 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:07.673 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:12.912 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:17.952 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:22.994 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:28.429 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:33.658 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:38.694 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:43.823 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:49.159 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:54.427 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:02:59.460 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:04.691 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:10.128 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:15.154 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:20.384 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:25.617 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:30.640 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:35.981 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:41.409 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:46.432 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:51.458 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:03:56.997 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:02.036 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:07.276 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:12.320 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:17.754 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:23.194 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:28.532 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:33.770 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:38.808 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:43.850 [DEBUG][6] Renew lease ok (0x140002)
2013-08-19 18:04:49.187 [DEBUG][6] Renew lease ok (0x140002)
...

[sub]

Can you zip and attach the complete log files? You'll probably also need to enable debug logging in XBMC.