New DVB-S NZ Prime settings

[tazziedave]

I've tried the device scan option for the new prime channel and it wasn't picked up on 12519 MHz.

These are the new settings according to http://freeviewforum.co.nz/page/prime-sat-changes#tech


12519 MHz, Service ID, Video PID, Audio PID, Teletext PID, PCR PID
Prime, 1530, 1013, 1113, 1913, 8183
FOUR PLUS 1, 1510, 1014, 1114, 1914, 8184
The Edge TV, 1511, 1015, 1115, ------, 8185

By manually editing a channel on 12519 MHz to SID 1530, I was able to get the EPG info for prime but not able to get a picture or sound. Must admit I don't understand the TSID and ONID settings - can't relate them to the above.

Any suggestions?

Thanks, Dave

[sub]

Which satelite did you have selected? 'Optus D1 (160.0E)' or 'OPTUS D1 FTA (160.0E)'?

[Jaggy]

It worked for me last evening using a modified OPTUS D1 FTA (160.0E).ini ...here is my modified ini

[SATTYPE]
1=1600.0
2=OPTUS D1 FTA (160.0E)

[DVB]
0=6
1=12456,H,22500,0
2=12483,H,22500,0
3=12644,H,22500,0
4=12519,H,22500,0
5=12707,H,22500,0
6=12381,V,3750,23,S2,QPSK

[tazziedave]

Which satelite did you have selected? 'Optus D1 (160.0E)' or 'OPTUS D1 FTA (160.0E)'?

Optus D1 (160.0E). Will try again with FTA

[sub]

With the FTA one you'll need to update it to match Jaggy's above. His version adds 12519.

[tazziedave]

Tried again with modified FTA and non-FTA. 12519 is definitely being scanned, but no sign of the new Prime channels.

Device is an Hauppauge WinTV 88x tuner. I've got no terrestrial line-of-sight so I'm stuck with DVB-S. Switch is 11700, LOF1 9750 and LOF2 10600. Don't know if any of this makes a difference.

[Jaggy]

Switch is 11700, LOF1 9750 and LOF2 10600. Don't know if any of this makes a difference.

That doesn't look right to me, most LNB's in this country are (most common) 11300 or (less common) 10750..... for me I have to set it Switch 11300, LOF1 11300, LOF2 11300 & for my other LNB the same thing but using 10750 instead

[lost@c]

It's the same as mine which work OK?
[ATTACHMENT NOT FOUND]

[tazziedave]

Thanks lost@c, when I tried with the standard 11300 settings I got nothing. I'll stick with the settings that actually work

I notice that your PRIME channel is still set for 12707 SID 1018. Is this working? If so, does it come up with the "Prime is moving" message on the shows?

[tazziedave]

Jaggy, Still not having any joy with a 12519 scan. Can you tell me the TSID and ONID of the PRIME SID 1530 channel that you found. I'd like to try again with another manual edit. Thanks