Log file information

[jcole998]

Below is a segment of an overnight update to the guide. I like to check the log to see how the update completed.

Can someone please explain the meaning of the bold-faced lines? Not an error but I enjoy knowing what's really happening.

Thank you.

2017-09-23 04:13:28.984 [INFO][9] UpdateRecurringRecording(205, 'Hawaii Five-0'):
<Rules>
<EPGTitle>Hawaii Five-0</EPGTitle>
<ChannelOID>7410</ChannelOID>
<ChannelName>WCBS-DT</ChannelName>
<StartTime>2017-09-30T01:00:00.0000000Z</StartTime>
<EndTime>2017-09-30T02:00:00.0000000Z</EndTime>
<PrePadding>1</PrePadding>
<PostPadding>1</PostPadding>
<Quality>0</Quality>
<Keep>0</Keep>
<OnlyNewEpisodes>true</OnlyNewEpisodes>
</Rules>

2017-09-23 04:13:29.680 [DEBUG][9] LoadListingsMatchingTitle(channel=7410,title=Hawaii Five-0)
2017-09-23 04:13:29.684 [DEBUG][9] - Potential episode at: 9/29/2017 9:00:00 PM
2017-09-23 04:13:29.684 [DEBUG][9] ...check IsValid()
2017-09-23 04:13:29.685 [DEBUG][9] ...scheduling episode
2017-09-23 04:13:29.685 [DEBUG][9] ScheduleRecording@1
2017-09-23 04:13:29.685 [DEBUG][9] ScheduleRecording@2.0
2017-09-23 04:13:29.685 [DEBUG][9] ScheduleRecording@2.1
2017-09-23 04:13:29.685 [DEBUG][9] CaptureSource.LoadAll()
2017-09-23 04:13:29.686 [DEBUG][9] ScheduleRecording@2.2
2017-09-23 04:13:29.688 [DEBUG][9] ScheduleRecording@2.2
2017-09-23 04:13:29.692 [DEBUG][9] Checking if multi-record possible...
2017-09-23 04:13:29.693 [DEBUG][9] <tuning>
<type>HDHR</type>
<service_id>502</service_id>
<locator>
<sid>502</sid>
<tsid>0</tsid>
<map>0</map>
<chan>0</chan>
<name>WCBS-DT</name>
</locator>
</tuning>

2017-09-23 04:13:29.693 [DEBUG][9] <tuning>
<type>HDHR</type>
<service_id>507</service_id>
<locator>
<sid>507</sid>
<tsid>0</tsid>
<map>0</map>
<chan>0</chan>
<name>WABC-DT</name>
</locator>
</tuning>

2017-09-23 04:13:29.693 [DEBUG][9] ScheduleRecording@2.2
2017-09-23 04:13:29.694 [DEBUG][9] ScheduleRecording@2.3
2017-09-23 04:13:29.694 [DEBUG][9] ScheduleRecording@2.4
2017-09-23 04:13:29.694 [DEBUG][9] ScheduleRecording@3
2017-09-23 04:13:29.767 [DEBUG][9] ScheduleRecording@4
2017-09-23 04:13:29.767 [DEBUG][9] ScheduleRecording@5
2017-09-23 04:13:29.767 [DEBUG][9] - Potential episode at: 10/6/2017 9:00:00 PM
2017-09-23 04:13:29.767 [DEBUG][9] ...check IsValid()
2017-09-23 04:13:29.767 [DEBUG][9] ...scheduling episode
2017-09-23 04:13:29.767 [DEBUG][9] ScheduleRecording@1
2017-09-23 04:13:29.767 [DEBUG][9] ScheduleRecording@2.0
2017-09-23 04:13:29.767 [DEBUG][9] ScheduleRecording@2.1
2017-09-23 04:13:29.767 [DEBUG][9] CaptureSource.LoadAll()
2017-09-23 04:13:29.769 [DEBUG][9] ScheduleRecording@2.2
2017-09-23 04:13:29.771 [DEBUG][9] ScheduleRecording@2.2
2017-09-23 04:13:29.775 [DEBUG][9] Checking if multi-record possible...
2017-09-23 04:13:29.776 [DEBUG][9] <tuning>
<type>HDHR</type>
<service_id>502</service_id>
<locator>
<sid>502</sid>
<tsid>0</tsid>
<map>0</map>
<chan>0</chan>
<name>WCBS-DT</name>
</locator>
</tuning>

2017-09-23 04:13:29.776 [DEBUG][9] <tuning>
<type>HDHR</type>
<service_id>507</service_id>
<locator>
<sid>507</sid>
<tsid>0</tsid>
<map>0</map>
<chan>0</chan>
<name>WABC-DT</name>
</locator>
</tuning>

2017-09-23 04:13:29.776 [DEBUG][9] <tuning>
<type>HDHR</type>
<service_id>507</service_id>
<locator>
<sid>507</sid>
<tsid>0</tsid>
<map>0</map>
<chan>0</chan>
<name>WABC-DT</name>
</locator>
</tuning>

2017-09-23 04:13:29.777 [DEBUG][9] ScheduleRecording@2.2
2017-09-23 04:13:29.778 [DEBUG][9] ScheduleRecording@2.3
2017-09-23 04:13:29.778 [DEBUG][9] ScheduleRecording@2.4
2017-09-23 04:13:29.778 [DEBUG][9] ScheduleRecording@3
2017-09-23 04:13:29.867 [DEBUG][9] ScheduleRecording@4
2017-09-23 04:13:29.868 [DEBUG][9] ScheduleRecording@5

[sub]

There is one of these <tuning> blocks for each type of device, and the carry the information the application needs to tune the requested channel on that device. In the case of the HDHR Prime / DCR-3250, it only really needs the channel number for tuner. For other types of tuners, you get frequency, symbol rate, video input, satellite selection etc.

[jcole998]

also looks like NextPVR is checking resources to make sure simultaneous recordings will not conflict.

Thank you, sub. Good info.