Service crashed after finishing first record

[Cape-City]

Hi,

i had scheduled 2 records :

1 channel 16:30 - 17:00
2 channel 17:00 - 17:30

after finishing first record the gbpvrrecordservice crashed ?!?

If the recordtime overlay eachother a message appears where i can
choose what to do, but not in this case - no time conflict.

i wrote a little tool which tracks the service and when its stopped, restart
it, but this cant be the End-Solution ...

another problem was when set up the timeshift mode for one channel and
when a scheduled record starts, there comes up no message and he didnt
record the scheduled one - the timeshift is running further ....

CC

[sub]

What capture device are you using?

Post your GBPVRRecordingService.exe.log and GBPVRRecordingService.exe-native.log

[Cape-City]

I have a TwinHan DVB-T Card running, finaly

Code:

17:08:30.000 INFO Log started 17:08:30.000 INFO BDARecorder:::StartRecording(Twinhan DVB-T, 1, D:\Eigene Dateien\Eigene Videos\TV Capture\Einsatz in 4 Wänden\Einsatz in 4 Wänden_20050902_17001730.mpg, T:C42,642000,0,0,8~P:16405~V:337~A:338~PMT:336~TXT:343~N:>RTL Television) 17:08:30.030 INFO Initializing DVB-T tuning request. 17:08:30.030 INFO tuning@1 17:08:30.030 INFO tuning@2 17:08:30.030 INFO tuning@3 17:08:30.030 INFO tuning@4 17:08:30.030 INFO tuning@5 17:08:30.040 INFO tuning@6 17:08:30.040 INFO tuning@7 17:08:30.040 INFO tuning@8 17:08:30.060 INFO tuning@8 17:08:30.060 VERBOSE getSetting(BDAMultiplexer) 17:08:30.311 VERBOSE ConnectPins: 'Output1' to 'MPEG-2 Stream' 17:08:30.311 VERBOSE getSetting(EPGProcessingMode) 17:08:30.321 VERBOSE Mapping Video PID 337 17:08:30.321 VERBOSE Mapping Audio PID 338 17:08:30.321 VERBOSE getSetting(EnableTeleText) 17:08:30.321 VERBOSE Mapping Teletext PID 343 17:08:30.341 VERBOSE ConnectPins: 'DVBTeletext' to 'Input' 17:08:30.371 VERBOSE Initialzing Cyberlink mux 17:08:30.371 VERBOSE Setting IID_IMpgMuxer 17:08:30.371 VERBOSE Setting IID_IMpgMuxer3 17:08:30.371 VERBOSE Setting IID_IMpgMuxerInfo 17:08:30.371 VERBOSE SetMuxInfo2() did not return S_OK 17:08:30.371 VERBOSE Finished initialzing Cyberlink mux 17:08:30.391 VERBOSE ConnectPins: 'Video' to 'Video In' 17:08:30.391 VERBOSE ConnectPins: 'Audio' to 'Audio In' 17:08:30.391 VERBOSE ConnectPins: 'Output' to 'Input' 17:08:30.601 VERBOSE locked=0 present=0 strength=0 quality=0 17:08:30.922 VERBOSE getSetting(ListGraphFilters) 17:08:30.922 VERBOSE Graph contains the following filters: 17:08:30.922 VERBOSE - MPEG-2 Sections and Tables 17:08:30.922 VERBOSE - BDA MPEG2 Transport Information Filter 17:08:30.922 VERBOSE - GB-PVR Writer 17:08:30.922 VERBOSE - GB-PVR WST SRT Digital 17:08:30.922 VERBOSE - CyberLink MPEG Muxer 17:08:30.922 VERBOSE - MPEG-2 Demultiplexer 17:08:30.922 VERBOSE - TwinHan DVBT BDA Capture Filter 17:08:30.922 VERBOSE - TwinHan DVBT BDA Tuner Filter 17:08:30.922 VERBOSE - Microsoft DVBT Network Provider 17:08:30.922 VERBOSE getSetting(SaveGraphFiles) 17:08:30.922 VERBOSE BDARecorder::StartRecording() finished 17:13:51.623 VERBOSE BDARecorder::StopRecording() 17:13:51.823 VERBOSE BDARecorder::StopRecording() finished 17:53:31.815 INFO BDARecorder:::StartRecording(Twinhan DVB-T, 1, D:\Eigene Dateien\Eigene Videos\Live TV Buffering\Leute heute_1_20050902_17451800.mpg, T:C32,562000,0,0,8~P:514~V:545~A:546~PMT:544~TXT:551~N:>ZDF) 17:53:31.825 INFO Initializing DVB-T tuning request. 17:53:31.825 INFO tuning@1 17:53:31.825 INFO tuning@2 17:53:31.825 INFO tuning@3 17:53:31.825 INFO tuning@4 17:53:31.825 INFO tuning@5 17:53:31.825 INFO tuning@6 17:53:31.825 INFO tuning@7 17:53:31.825 INFO tuning@8 17:53:31.825 INFO tuning@8 17:53:31.825 VERBOSE getSetting(BDAMultiplexer) 17:53:31.865 VERBOSE ConnectPins: 'Output1' to 'MPEG-2 Stream' 17:53:31.875 VERBOSE getSetting(EPGProcessingMode) 17:53:31.875 VERBOSE Mapping Video PID 545 17:53:31.875 VERBOSE Mapping Audio PID 546 17:53:31.875 VERBOSE getSetting(EnableTeleText) 17:53:31.875 VERBOSE Mapping Teletext PID 551 17:53:31.895 VERBOSE ConnectPins: 'DVBTeletext' to 'Input' 17:53:31.905 VERBOSE Initialzing Cyberlink mux 17:53:31.905 VERBOSE Setting IID_IMpgMuxer 17:53:31.905 VERBOSE Setting IID_IMpgMuxer3 17:53:31.905 VERBOSE Setting IID_IMpgMuxerInfo 17:53:31.905 VERBOSE SetMuxInfo2() did not return S_OK 17:53:31.905 VERBOSE Finished initialzing Cyberlink mux 17:53:31.925 VERBOSE ConnectPins: 'Video' to 'Video In' 17:53:31.925 VERBOSE ConnectPins: 'Audio' to 'Audio In' 17:53:31.925 VERBOSE ConnectPins: 'Output' to 'Input' 17:53:32.046 VERBOSE locked=0 present=0 strength=0 quality=0 17:53:32.336 VERBOSE getSetting(ListGraphFilters) 17:53:32.336 VERBOSE Graph contains the following filters: 17:53:32.336 VERBOSE - MPEG-2 Sections and Tables 17:53:32.336 VERBOSE - BDA MPEG2 Transport Information Filter 17:53:32.336 VERBOSE - GB-PVR Writer 17:53:32.336 VERBOSE - GB-PVR WST SRT Digital 17:53:32.336 VERBOSE - CyberLink MPEG Muxer 17:53:32.336 VERBOSE - MPEG-2 Demultiplexer 17:53:32.336 VERBOSE - TwinHan DVBT BDA Capture Filter 17:53:32.336 VERBOSE - TwinHan DVBT BDA Tuner Filter 17:53:32.336 VERBOSE - Microsoft DVBT Network Provider 17:53:32.336 VERBOSE getSetting(SaveGraphFiles) 17:53:32.336 VERBOSE BDARecorder::StartRecording() finished 17:54:08.007 VERBOSE BDARecorder::StopRecording() 17:54:08.218 VERBOSE BDARecorder::StopRecording() finished 18:14:20.240 INFO BDARecorder:::StartRecording(Twinhan DVB-T, 1, D:\Eigene Dateien\Eigene Videos\TV Capture\Wohnen nach Wunsch - Ein Duo für vier Wände\Wohnen nach Wunsch - Ein Duo für vier Wände_20050902_18151845.mpg, T:C42,642000,0,0,8~P:16418~V:545~A:546~PMT:544~TXT:551~N:>VOX) 18:14:20.240 INFO Initializing DVB-T tuning request. 18:14:20.240 INFO tuning@1 18:14:20.240 INFO tuning@2 18:14:20.240 INFO tuning@3 18:14:20.240 INFO tuning@4 18:14:20.240 INFO tuning@5 18:14:20.240 INFO tuning@6 18:14:20.240 INFO tuning@7 18:14:20.240 INFO tuning@8 18:14:20.250 INFO tuning@8 18:14:20.250 VERBOSE getSetting(BDAMultiplexer) 18:14:20.290 VERBOSE ConnectPins: 'Output1' to 'MPEG-2 Stream' 18:14:20.290 VERBOSE getSetting(EPGProcessingMode) 18:14:20.290 VERBOSE Mapping Video PID 545 18:14:20.290 VERBOSE Mapping Audio PID 546 18:14:20.290 VERBOSE getSetting(EnableTeleText) 18:14:20.290 VERBOSE Mapping Teletext PID 551 18:14:20.320 VERBOSE ConnectPins: 'DVBTeletext' to 'Input' 18:14:20.330 VERBOSE Initialzing Cyberlink mux 18:14:20.330 VERBOSE Setting IID_IMpgMuxer 18:14:20.330 VERBOSE Setting IID_IMpgMuxer3 18:14:20.330 VERBOSE Setting IID_IMpgMuxerInfo 18:14:20.330 VERBOSE SetMuxInfo2() did not return S_OK 18:14:20.330 VERBOSE Finished initialzing Cyberlink mux 18:14:20.351 VERBOSE ConnectPins: 'Video' to 'Video In' 18:14:20.351 VERBOSE ConnectPins: 'Audio' to 'Audio In' 18:14:20.351 VERBOSE ConnectPins: 'Output' to 'Input' 18:14:20.471 VERBOSE locked=0 present=0 strength=0 quality=0 18:14:21.011 VERBOSE getSetting(ListGraphFilters) 18:14:21.011 VERBOSE Graph contains the following filters: 18:14:21.011 VERBOSE - MPEG-2 Sections and Tables 18:14:21.011 VERBOSE - BDA MPEG2 Transport Information Filter 18:14:21.011 VERBOSE - GB-PVR Writer 18:14:21.011 VERBOSE - GB-PVR WST SRT Digital 18:14:21.011 VERBOSE - CyberLink MPEG Muxer 18:14:21.011 VERBOSE - MPEG-2 Demultiplexer 18:14:21.011 VERBOSE - TwinHan DVBT BDA Capture Filter 18:14:21.011 VERBOSE - TwinHan DVBT BDA Tuner Filter 18:14:21.011 VERBOSE - Microsoft DVBT Network Provider 18:14:21.011 VERBOSE getSetting(SaveGraphFiles) 18:14:21.011 VERBOSE BDARecorder::StartRecording() finished 18:51:00.174 VERBOSE BDARecorder::StopRecording() 18:51:00.344 VERBOSE BDARecorder::StopRecording() finished

Code:

02.09.2005 19:29:35.132 INFO [4] GB-PVR Recording Service starting 02.09.2005 19:29:35.173 VERBOSE [4] installDirectory is C:\Programme\devnz\gbpvr\ 02.09.2005 19:29:35.183 VERBOSE [4] configurationFile is C:\Programme\devnz\gbpvr\config.xml 02.09.2005 19:29:35.213 VERBOSE [4] getValue() loading new key/value into cache: /settings/DatabaseConnectionString 02.09.2005 19:29:35.213 VERBOSE [4] getValue: /settings/DatabaseConnectionString : Provider=Microsoft.Jet.OLEDB.4.0;Data Source=".\gbpvr.mdb";User Id=admin;Password= 02.09.2005 19:29:35.213 VERBOSE [4] databaseConnectionString is Provider=Microsoft.Jet.OLEDB.4.0;Data Source="C:\Programme\devnz\gbpvr\\gbpvr.mdb";User Id=admin;Password= 02.09.2005 19:29:35.213 VERBOSE [4] getValue() loading new key/value into cache: /settings/DontAntiAlias 02.09.2005 19:29:35.213 VERBOSE [4] getValue: /settings/DontAntiAlias : false 02.09.2005 19:29:35.213 VERBOSE [4] getValue() loading new key/value into cache: /settings/LoggingLevel 02.09.2005 19:29:35.213 VERBOSE [4] getValue: /settings/LoggingLevel : Info 02.09.2005 19:29:35.623 INFO [4] Starting remoting service 02.09.2005 19:29:35.914 INFO [4] Start GB-PVR web on: 7647 02.09.2005 19:29:36.524 INFO [57] LiveTV File Removal Thread Started 02.09.2005 19:55:02.479 INFO [80] GB-PVR Recording Service stopping 02.09.2005 19:55:02.569 INFO [23] RecordingManager has been signalled to shutdown 02.09.2005 19:55:02.569 INFO [23] RecordingManager has finished 02.09.2005 19:55:03.600 INFO [80] GB-PVR Recording Service shutdown complete 02.09.2005 19:55:03.600 INFO [208] Finalize called

[sub]

Sorry, I dont know. There is no error shown there.

[wtg]

I encountered a similar problem the other night. Two recordings scheduled and the recording service died after finishing the first, though mine didn't even have a problem with one ending and the other starting at the same time... mine were seperated by several hours.

This was the first time I even had the recording service crash on me so I'm hoping it was just a fluke, but it was the first recording to run after upgrading. I'll post the logs this evening when I get a chance.

Tim

[capone]

I've had things like that happen, but it's a util or plugin that caused it (comskip has something against programs on FX once in a while).

[wtg]

I had recording service crash again last night, and just like the first time, it was after successfully recording the first show, it crashed during the second. Here's the error I received on screen:

Error Message

Another interesting thing about this error is that when I tried to restart the service this error would occur again in just a couple seconds. I think it's because the show that it crashed on while recording was still on. After the show's on-air time elapsed, I was able to restart the service.

I'm using a PVR150, for what it's worth.

Here are my logs:

Code:

9/1/2005 10:16:59 PM.188 INFO [4] GB-PVR Recording Service starting 9/1/2005 10:16:59 PM.469 VERBOSE [4] installDirectory is D:\Program Files\devnz\gbpvr\ 9/1/2005 10:16:59 PM.469 VERBOSE [4] configurationFile is D:\Program Files\devnz\gbpvr\config.xml 9/1/2005 10:16:59 PM.579 VERBOSE [4] getValue() loading new key/value into cache: /settings/DatabaseConnectionString 9/1/2005 10:16:59 PM.579 VERBOSE [4] getValue: /settings/DatabaseConnectionString : Provider=Microsoft.Jet.OLEDB.4.0;Data Source=".\gbpvr.mdb";User Id=admin;Password= 9/1/2005 10:16:59 PM.579 VERBOSE [4] databaseConnectionString is Provider=Microsoft.Jet.OLEDB.4.0;Data Source="D:\Program Files\devnz\gbpvr\\gbpvr.mdb";User Id=admin;Password= 9/1/2005 10:16:59 PM.589 VERBOSE [4] getValue() loading new key/value into cache: /settings/DontAntiAlias 9/1/2005 10:16:59 PM.589 VERBOSE [4] getValue: /settings/DontAntiAlias : false 9/1/2005 10:16:59 PM.589 VERBOSE [4] getValue() loading new key/value into cache: /settings/LoggingLevel 9/1/2005 10:16:59 PM.589 VERBOSE [4] getValue: /settings/LoggingLevel : Error

Obviously nothing there... not even anything with yesterdays date.

Here's the native log:

Code:

23:00:00.380 INFO Log started 23:00:00.380 VERBOSE ConexantRecorder::StartRecording(1, 1, 41, 0) 23:00:00.390 VERBOSE Capture Device is based on BlackBird architecture 23:00:00.400 VERBOSE Capture Device is using Conexant (derived) drivers 23:00:00.400 VERBOSE Loading filter names 23:00:00.400 VERBOSE Found names: 23:00:00.400 VERBOSE Hauppauge WinTV PVR PCI II Crossbar 23:00:00.400 VERBOSE Hauppauge WinTV PVR PCI II Capture 23:00:00.400 VERBOSE Hauppauge WinTV PVR PCI II TvTuner 23:00:00.400 VERBOSE Hauppauge WinTV PVR PCI II TvAudio 23:00:00.590 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In' 23:00:01.021 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In' 23:00:01.051 VERBOSE Looking for encoder filter 23:00:01.061 VERBOSE - Hauppauge WinTV PVR PCI II Encoder 23:00:01.081 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000 23:00:01.081 VERBOSE getSetting(AutoDetectEncoderMethod) 23:00:01.111 VERBOSE About try all encoders until we find one that works... 23:00:01.111 VERBOSE Hauppauge WinTV PVR PCI II Encoder 23:00:01.131 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000 23:00:01.131 VERBOSE Pin mediums match... 23:00:01.171 VERBOSE using instance: 1 23:00:01.251 VERBOSE put_Mode(AMTUNER_MODE_TV) 23:00:01.251 VERBOSE put_CountryCode(1) 23:00:01.251 VERBOSE put_TuningSpace(1) 23:00:01.251 VERBOSE put_InputType(0, 0) 23:00:01.251 VERBOSE put_ConnectInput(0) 23:00:01.251 VERBOSE put_Channel(41, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT) 23:00:01.421 VERBOSE get_VideoFrequency() returns 325250000 23:00:01.421 VERBOSE get_CountryCode() returns 1 23:00:01.421 VERBOSE About to query available formats 23:00:01.431 VERBOSE ConexantRecorder::SetConfigurationECP() 23:00:01.451 INFO Firmware Version 2.5.32 Audio Firmware Version <<can't read now>> Model 26032 Rev C182 Serial No: 2964406 Tuner: 82 Decoder: 28 AudioIC: 35 IR Input Map: C= 0x000f, S= 0x0003 23:00:01.571 VERBOSE getSetting(EnableTeleText) 23:00:01.642 VERBOSE getSetting(ListGraphFilters) 23:00:01.642 VERBOSE Graph contains the following filters: 23:00:01.642 VERBOSE - GB-PVR Writer 23:00:01.642 VERBOSE - Encoder 23:00:01.642 VERBOSE - Capture 23:00:01.642 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar 23:00:01.642 VERBOSE - TV Audio 23:00:01.642 VERBOSE - TV Tuner 23:00:01.642 VERBOSE getSetting(SaveGraphFiles) 23:00:01.652 VERBOSE ConexantRecorder::StartRecording() done 00:00:00.166 VERBOSE ConexantRecorder::StopRecording() 20:00:03.690 VERBOSE ConexantRecorder::StartRecording(1, 1, 154, 0) 20:00:03.700 VERBOSE Capture Device is based on BlackBird architecture 20:00:03.700 VERBOSE Capture Device is using Conexant (derived) drivers 20:00:03.700 VERBOSE Loading filter names 20:00:03.700 VERBOSE Found names: 20:00:03.700 VERBOSE Hauppauge WinTV PVR PCI II Crossbar 20:00:03.700 VERBOSE Hauppauge WinTV PVR PCI II Capture 20:00:03.700 VERBOSE Hauppauge WinTV PVR PCI II TvTuner 20:00:03.700 VERBOSE Hauppauge WinTV PVR PCI II TvAudio 20:00:04.221 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In' 20:00:04.231 VERBOSE Looking for encoder filter 20:00:04.251 VERBOSE - Hauppauge WinTV PVR PCI II Encoder 20:00:04.261 VERBOSE GetMedium(pCapturePin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000 20:00:04.261 VERBOSE getSetting(AutoDetectEncoderMethod) 20:00:04.261 VERBOSE About try all encoders until we find one that works... 20:00:04.261 VERBOSE Hauppauge WinTV PVR PCI II Encoder 20:00:04.301 VERBOSE Encoder.GetMedium(p656Pin) returns: {0F8ED065-F820-4A1F-9822-EAAE043A19AB}-00000001-00000000 20:00:04.301 VERBOSE Pin mediums match... 20:00:04.321 VERBOSE using instance: 1 20:00:04.381 VERBOSE About to query available formats 20:00:04.381 VERBOSE ConexantRecorder::SetConfigurationECP() 20:00:04.401 INFO Firmware Version 2.5.32 Audio Firmware Version <<can't read now>> Model 26032 Rev C182 Serial No: 2964406 Tuner: 82 Decoder: 28 AudioIC: 35 IR Input Map: C= 0x000f, S= 0x0003 20:00:04.501 VERBOSE getSetting(EnableTeleText) 20:00:04.561 VERBOSE getSetting(ListGraphFilters) 20:00:04.561 VERBOSE Graph contains the following filters: 20:00:04.561 VERBOSE - GB-PVR Writer 20:00:04.561 VERBOSE - Encoder 20:00:04.561 VERBOSE - Capture 20:00:04.561 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar 20:00:04.561 VERBOSE getSetting(SaveGraphFiles) 20:00:04.561 VERBOSE ConexantRecorder::StartRecording() done

Doesn't look like there's anything there either, but you'll know better.

I've tried to record 4 shows since I upgraded to the latest release, and it's crashed on the second show, after which I restarted it, and on the fourth.

Let me know if there's any other info you need. After getting the error I archived all the .log files in the directory before starting the service.

Thanks,
Tim