If you have could you please reply with a copy of your
C:\Program Files\Devnz\GBPVR\BDA\SCAN-1.cache
file.
Mine won't scan so I need to copy the line for Briz31 into my file.
NPVR is generally working fine, but I do have a problem. My EPG data is partial/incomplete.
I use the Zap2It grabber Zap2xml to get an xml file, then I update NPVR with it. I see that it is incomplete, like either the xml file is incomplete or NPVR (and GB-PVR) read it incorrectly. Happens whether I do it manually, via Windows Task Scheduler, and if I clear EPG first.
I've attached screen shots of the Zap2It site showing the "correct" data, a screen shot of what I see in NPVR, with fewer shows than there should be per the zap web site data, and the xml file in .zip format. I don't know how to read the xml file myself, other than to go line by line when in my browser.....
Am I doing something wrong, or is NPVR just not reading the xml file in proper fashion?
I'm trying to use GB-PVR with an Itek "ITDVBTM3 USB DVB-T TV Stick". It is based on AF9015 chipset, and has installed an AF9015 BDA Filter.
I'm not able to start tuning, filter it is not listed into Tuning Assistant. :confused:
I read elsewhere I should send to the forum the log file generated by FilterCheck. here:
00:18:36.925 INFO Log started
00:18:36.925 INFO Filter Check v1.0
00:18:36.925 INFO
00:18:36.925 INFO
00:18:36.925 INFO Checking AM_KSCATEGORY_CAPTURE filters
00:18:36.941 INFO
00:18:36.941 INFO
00:18:36.941 INFO Checking AM_KSCATEGORY_ENCODER filters
00:18:36.941 INFO
00:18:36.941 INFO
00:18:36.941 INFO Checking AM_KSCATEGORY_CROSSBAR filters
00:18:36.941 INFO
00:18:36.941 INFO
00:18:36.941 INFO Checking AM_KSCATEGORY_TVTUNER filters
00:18:36.941 INFO
00:18:36.941 INFO
00:18:36.941 INFO Checking AM_KSCATEGORY_TVAUDIO filters
00:18:36.941 INFO
00:18:36.941 INFO
00:18:36.941 INFO Checking AM_KSCATEGORY_VBICODEC filters
00:18:36.941 INFO
00:18:36.941 INFO
00:18:36.941 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
00:18:36.956 INFO found: AF9015 BDA Filter
00:18:36.956 INFO - (input) Antenna In Pin
00:18:36.956 INFO - (output) MPEG2 Transport
00:18:36.956 INFO
00:18:36.956 INFO
00:18:36.956 INFO
00:18:36.956 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
I currently have a Hauppage dual DVB card installed in it running Windows Media Center. I've found this application on the net and it looks quite good.
I'm also looking to buy a Hauppage HD satellite card (WinTV Nova-HD S2). Would these 2 cards work side-by-side in the same machine?
Also, how does this media/tv application compare with Windows Vista MCE?
We have Windows XP Pro, Diamond multi-media Xtreme TV 552 PVR card(PCI card), and PVR doesn't seem to recognize the card or devices, there is no option to enable it. We have downloaded the new NPVR onto the computer, and have taken off GB-PVR, and when we go to the Device Tab to Device Setup there is no card listed.. .and no way to click on Device Setup.. Please help, :confused:
I have a 2200 that I want to use for svideo capture. The 2200 appears to be OK for digital input. If I set the recording source for "Digital Recording Plugin" and go through the setup routine, I can get the digital TV channels, although for some reason only about 1/4 of the channels have been automatically detected. Using WMC, I get all channels detected. To capture svideo I have tried setting the Recording Source to "Analog HighDef Recording Plugin". I then go to settings. The "Capture Card Type" only shows "Hauppauge WinTV HD-PVR" (not 2200 nor anything else). There is a choice of input sources and I select "SVideo". When I click on OK I get "The drivers for this device you have configured do not seem to be installed...." If I continue anyway, the configuration completes but I don't get any svideo signal. If I choose "Analog Recording Plugin", I get what appears to be the setup for anlaogue TV + svideo and composite options. I have tried them all. I don't get the driver error but nor do I get any picture at all for any of them. Any suggestions?
I can't setup these cards. Not sure what else I should be trying. Have registered HCW_MCMPEG2MUX.AX successfully.
Attached log and screen of error popup.
Thanks
matt
I have been trying to get the video library to show metadata when I browse the folders.
It works fine when I browse my TV shows, then NPVR show what is written in tvshow.nfo
But for movies, I have to select the video file in the folder to get the movie data to show.
The folders contains various meta data files (movie.nfo, mymovies.xml and [filename].xml and .nfo), so I had hoped it would select one of them.
Do I have to use different syntax than with tv-shows? That seems unlikely.
My apologies in advance if this looks familiar, but this is a follow on from what I was trying to do with USBUIRTSEND.exe in the GBPVR Legacy thread, but actually it applies more to NPVR because that's where I am trying to use it.
My problem is that the parameters you select for the Svideo Input of NPVR with a a PVR-150 seem to be different to GBPVR. The input I selected is from Cable and the Tuner I select is S-Video Ports.
However I can't see USBUIRTSEND.exe sending a signal to the USB-UIRT. It seems from the log below that it wants to change the Device's (PVR-150) (internal) Analog channel changer even though the SOURCE and INPUT apear to be correct (SVIDEO and CABLE resp.).
What I did was selecetd the above import the channels via an XMLTV file.
Q1. When I try to do this, I can select "SVideo" and "Cable" but what do I select for Country? I tried where I live but it fails to change channel. I tried Analog Tuner - it fails. I tried Analog Tuner RF Input. That fails, horribly.
Q2. When I look back into NPVR settings it seems to revert to "Analog" under the type for that device - I also get the fuzzy analog screen (because I do not have an Analog Antenna), and it doesn't seem to be sticky choosing SVideo and Cable?
Code:
2010-08-02 23:52:10.596
[INFO][3] Running blaster: C:\Program Files\NPVR\ChanChg\USBUIRTSend.exe "C:\Program Files\NPVR\ChanChg\IRDefs\HKNowBB YX-5218A.dat" 6712010-08-02 23:52:12.358
[DEBUG][3] About to tune graph to:
<tuning>
<type>Analog</type>
<locator>
<channel>671</channel>
<country>1</country>
<input>cable</input>
<source>SVideo</source>
<fixed>2</fixed>
</locator>
</tuning>
I also got a couple of nasty errors when I chose RF (I think) esp. when I selected listen from the menu.
