I just keep getting core dump when I try to slect skins form the main menu. If I select blue from config I get a message "must use community 3 skins". Has anybody experienced this problem? Is it possible that 1.3.7 is too new for this plugin?
I just keep getting core dump when I try to slect skins form the main menu. If I select blue from config I get a message "must use community 3 skins". Has anybody experienced this problem? Is it possible that 1.3.7 is too new for this plugin?
With the release of the new installer I have finally compressed telnet and the gbpvr script into one script. I think I can deal with all problems now and the debugging requirements are greatly resolved by the installer.
However there are changes as you undo and unlearn what you did up to now. These new scripts are not available for download, they are created by the install program. Before creating them make backups of what you have working today.
Make sure you backup startmeup It will be overwritten and you probably want to replace it afterward.
Then run the installer, unselect everything and then select "Write PCH Scripts" It will create the required files GB-PVR.html, gbpvr.cgi browser.cgi and usb_a.cgi If you aren't using a guest mvpmc share you need to go back and edit gbpvr.cgi
Once it is installed you can remove lines from GB-PVR.html that you don't use. Remember to not use notepad or wordpad. You can also re-add any required configurations for DVD, share access etc.
Today I realised that something had changed in the EWA, I'm not sure it happened in this version but that's not important.
Long time ago (on my request) you implemented the feature that when you go ahead in time (to the right) the guide would stick to the same channels i stead of going back to the top of the page.
That feature seems to be gone now. Is this by accident or ................
I got a cheapo Chinese USB freeview (UK) tuner for £10 off Ebay. Was not expecting much but it works great!
Having trouble using the remote for anything else except the aweful Blaze software.
Have tried HID and a few others but cant seem to map all the keys on the remote.
Have not set up a remote in GB PVR config as I have no idea what I have got. Tried some combinations but nothing seems to work.
The wierd thing is that the number buttons work fine in GB PVR without me even selecting a remote to use in the config.
Anyway, the generic cheapo remote looks just like this one except mine has got 2 more buttons on it...
Anyone know if this thing even has a name and can be supported by any key-press software?
The actual USB receiver is listed as 'e3c' and shows up fine in GB PVR - its just the remote I want to tweak and get working.
I wrote a basic installer for GBPVR and the PCH and I thought it might be of general interest too. It takes a new user from no installation to a working solution in 5 - 15 minutes with one install. If you don't use an NMT just don't install the NMT component. The installer is partially MVP aware too, if you enter a Hauappauge MAC address.
I'd like comments on how this can be improved for distributing more things too. I'd like to add more skins and plugins over time, but I'm worried about people downloading everything and being overwhelmed.
This installer will not fix situations where GBPVR won't install and it doesn't install the codecs drivers etc that the PC needs (and that the PCH doesn't!)
I've upgraded to the latest version which is fantastic, many thanks Sub, but I have noticed that I now have no sound on recordings and if I record the program I am watching I also lose the sound on this,
any ideas?
all help appreciated
system:
2x Hauppauge Nova T 500's
XFX 6200 LE 256Mb
Asrock 4165i
1Gb Ram
Win XP sp3
The NMTInstall program has been designed to require a minimum user input, and you are strongly recommended to accept all defaults especially if you have not installed GBPVR before. If you are interested read Part V for information on what is being done.
These instruction will only work if you can set up a guest share on your server which on 2000/XP means Simple File Sharing is enabled and in Vista you need to disable Password Protected Sharing. Part VI has additional information links on this.
I. Download and Installation
To prepare you need to obtain and run this small install program http://http://www.nextpvr.com/nwiki/pmwi...stall2.exe and have the MAC address of your NMT ready to enter when prompted. If you are still using GB-PVR you can use this to install mvpmcx2 too.
a. Select your installation options. Existing GB-PVR users could remove all the choices in the first option except for installing mvpmcx2 and can decide whether they want to try the new skins and plugins in the second. Installing the GB-PVR updates in part 1 is still recommended.
b. Select the location for your client files (default recommended). If you want to use a USB drive on the NMT, insert the USB drive and chose it as the destination. This is not important for CSI hard disk installations, but it is a good idea to keep the folder so GB-PVR updates are only downloaded once.
d. (New Users Only) Accept all defaults on the GB-PVR install until you click on Finish.
e. Hit OK if the GB-PVR Configuration program launches (don't change anything in the configuration at this point) You will be prompted to retry until configuration is finished.
f. Review the Details for errors and hit Close on the installer when finished.
If you are using the CSI to install to the NMT disk you can skip the next two steps.
II. Test Connection
Note that some NMT devices could be supplied with old firmware that is not compatible with mvpmcx2. If the firmware date (shown on Setup->Maintenance is older than 01-17-<b>080808</b>-15-POP-402-000 you will need to update. Confirm the version after you do the update too, some people have needed to do this a couple of times.
After the installation is complete you are ready to test the connection. Before proceeding you will need to change the Video mode on the NMT Setup screen to something other then Auto. (Auto is available as advanced configuration only) Once your video monitor is setup, run the Network Browser from the Source menu. Select your PC and then select the mvpmc share. Use either the remote to select the fourth icon or hit the blue remote key to change the display selection to select and run GB-PVR. 3 selections will be presented, choose the option open GB-PVR via the Network Browser. GB-PVR should open. If it opens, but you don't see the Mayhem3 skin you probably entered the wrong MAC address in Step I. Fortunately your connection is ok and not optimized for the NMT.
Hitting the power button will get you back to the normal NMT menu.
III. Finalize the configuration
At this point you can continue to use the Network Browser to access GB-PVR however I recommend installing the mvpmc share as an NMT Source for direct access. From the Setup->Network screen just add the mvpmc share as a configured share. Don't change the name unless you also want to change startup script (gbpvr.cgi) in the mvpmc folder.
An optional advanced configuration is to edit gbpvr.cgi to the one line you will use, and if desired type it into the Web Service screen so that is stored in flash for easiest access. For example I hit Web Service Source 3 to get to GB-PVR anytime from the NMT menu.
IV. Install Media (New Users Only)
Now you are ready to tell GB-PVR about your Media. From the Start Menu Launch the GBPVR config program. Go to the Directories Tab and add the appropriate folders for all you local and shared media that you want to access. After you have updated all the directories hit OK to save your changes.
Part V Additional Info.
The following could be downloaded and installed with this program if selected. The program doesn't call home but it does connect to GBPVR.com, and microsoft.com to get files.
- VS 2005 Runtime
- .NET 2.0
- GBPVR 1.3.11
- recommended patches for GB-PVR
Also include are the optional MixMan/BekKen enhancements to enhance the NMT experience
- Mayem3 skin
- Music Plugin
The destination folder that you chose will be allowed Guest access and a share will be created. If you want to deny Guest write permissions to the folder you will need to do this manually. If you don't have Simple File Sharing turned on, or permit Guest access, you will need to do an advanced configuration.
GB-PVR's config.xml is also updated with relevant NMT entries.
Applying a patch could require you to restart the GBPVR Tray icon manually.
The install program will open PVRX2.exe and GBPVRRecordingService.exe through the Windows Firewall on your local subnet. You have to manage other firewalls yourself