I have an on-going issue. I'm using a number of MVP's and after a while, I get the "No Tuners Available" message. I currently have 4 tuners and when the last error occured, they were all idle so it is obviously not correct.
I've tried but have not managed to pin-point the particular circumstances that cause it (if there are any).
I've had the problem for a while now with 1.1.5 and have just upgraded to 1.2.9 but it hasn't gone away.
I've just switched my logs to debug so have attached the results immediately following the error. I've also included my config file.
Any suggestions gratefully received. If you need further info, let me know.
I am in the process of upgrading from 0.99.12 to 1.2.9. I had the old version running with ContourHC. On the MVP with the Skin plugin I was able to get all the submenu's right. Unfortunately I can not get the main menu in the old format. I had 5 or 6 options to choose from, but Contour was not in that list. I do get ContourHC buttons, but otherwise no resemblance.
Is there something wrong with my installation, or is it not yet implemented? If it is the latter, is there something I can do myself about it?
says that Blue-Ray content may require HDCP on your device.
Quote:If the display deviceâor in the case of using a PC to decrypt and play back HD DVD or Blu-ray media, the graphics card (hardware, drivers and playback software)âdoes not support HDCP, then a connection cannot be established. As a result, a black picture and/or error message will likely be displayed instead of the video content.
I've just upgraded from 1.1.5 to 1.2.9 on my Vista machine and the sound has gone on my BBC HD channel.
The strange thing is its ok when watching in live preview mode but as soon as I pause then play then the sound is gone.
also my existing hd recordings have no sound now.
Standard def is ok.
I can play my HD recordings in Wmp11 and Graphedit.
The BBC HD files have the TS extension
Graphedit uses PCM H264/AVC Decoder and AC3Filter
I have tried various video and audio settings in config but no change.
Looking at the log it seems that Mpeg Audio Decoder is always used for HD content no matter what settings I use in config.
Haali splitter does no show up as a tray icon when viewing HD recorded files in GBPVR.
Server: AthlonXP 2400+, 1.5GB DDR RAM, WinXP Home SP2, 30GB System Drive, 160GB Recording Drive, 320GB Archive Drive, 10/100 Wired LAN, HVR-1600 Capturing Dish Network via Analog/S-Video
Client: Wired MediaMVP operating with mvpmc dongle
I posted this string of threads in the Support forum but without response. So, I thought that maybe the MVP forum was more of a proper home for this issue. Below is a string of posts that I originally had made. I have attached the logs to correspond with the various posts.
Logs1
====
Recently, I upgraded to GBPVR 1.2.9 on my server. I have been and am running the "factory GBPVR" dongle on a new wired MVP. I typically do not use the MVP to watch live television, but rather just recordings. However, tonight, with three kiddos four and under, I didn't want to miss a particular movie. So, I was watching this movie with live preview and pausing on and off to get the kids ready for bed: baths, nighttime snacks and a bottle feeding. As I was nearing the end of the movie, suddenly the MVP lost its connection. At the time, I was approximately 15 minutes behind in the movie. After checking, it appears that this connection loss happened right at the time that the program ended. Looking at the MVP-PVRX2 log, it states that the software connection was terminated by the host machine. The GBPVRRecordingService log shows that a new file was started at nearly the same time. I have attached these two logs for your viewing pleasure.
Any suggestions for keeping this from happening in the future? Any help or recommendations would be greatly appreciated. Thanks in advance!
Luckily, I was able to go into the network Temp folder and finish watching the movie. Yeah!
Logs2
====
After the first issue above, I upgraded to the recommended build mvpmc dongle. Well, watching LiveTV tonight, as soon as a new stream was started for a new show, the MVP went black and eventually went back to the main menu kicking me out of LiveTV.
Logs3
====
Shortly after the issue immediately above, a show transition occurred while watching on my MVP and everything worked as it should. I attached the latest logs as well if this helps.
I also see a number of errors earlier in the logs too.
Although I have cable and am 'safe' when the big change hits the states in Feb. 2009, I got 2 of those $40 coupon cards to get a converter. I figure it's good to have one around in case cable dies.
I hooked it up to a junky, 19 year old tv (19") with the very simple rabbit ear antennae the tv came with and got every channel I'm suppose to. It was very easy and the box walked me thru what little set up there was.
I got the DTX9900 from Radio Shack. That was all they had and the reviews aren't so great. I guess if I got all my tv OTA I would wait for the price to come down as well as more choices. However, I don't see the big box stores carrying more than 1 or 2 brands as most people won't want to spend more than they have to.
Setup: Asus P5E-VM HDMI motherboard with on-board Intel graphics, connected via HDMI to a Sony LCD TV.
If I turn the TV off and then back on again when GBPVR is running, all I get is a black screen. If I move the mouse, the pointer appears. I have to Ctrl-Alt-Del and kill pvrx2 from task manager. Most bizarrely, the screen resolution changes down to 800x600.
None of the above happens if I don't have PVRX2 running, i.e. if I just turn the TV off and on again with just the Windows desktop displaying, it works just fine.
* dialogs for creation, deletion of tables, indexes, views and triggers
* ability to rename, copy, reindex tables
* ability to add and drop columns
* create new db, open any existing db, copy an existing db
* a tab for database settings (no need to write the pragma statements) where you can view and change the sqlite library settings
* export tables/views as csv or xml files
* import tables from csv or xml files
* a dropdown menu showing all profile db (*.sqlite)
* an intuitive heirarchical tree showing all tables, indexes, views and triggers
* ability to browse data from any table
* dialogs to allow searching in a table
* allows editing and deleting selected record while browsing a table's data
* an extensive menu that helps with writing sql by hand and then executing it
* remembers the last used db, table and the tab (structure, browse & search, etc.) across sessions
The OSD used to pop up when I the buttons on my remote. This seems broken in this release. Not visible on first or second monitor.....it jumps forward in the recording ...but no OSD at all to let you know where you are in the timline.
