I am using dvdshrink and videoredo to recode my dvd's to mpeg's.
The problem is that the sound is much lower than I would like. Lower than livetv. Does anyone know of a way with these two tools to increase the volume ?
My system. I have a P4P800E with 2000mg of memory, cards in machine, sound audigy 2, modem card ?. agp video NVIDIA GeForce4 Ti 4200 with AGP8X. and a Hauppauge WinTV Nova T (90002). Media player 11
Abstracked all but agp and capture card Hauppage Nova T. NO LUCK, GBPVR would still not map the channels. It attempts to connect then freezes the system completely. This is an old problem still not corrected.
I have winTV2000 on the system which works perfectly with all channels. Their bespoke EPS works fine too: So all drivers for the card are intact and ok. I tried uninstalling the EPS and cleaning the registry with Registry Mechanic in case there was something holding GBPVR back. No luck.
Then I started to get net framework reports that the data base was not recognized. Uninstalled cleaned and Reinstalled net framework and gbpvr still no luck.
Any other suggestions Please?
Also I have a number of threads that are open and not resolved that are connected with the present inquiry how can I cancel them and tidy up my inquiry on the system?
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Data.OleDb.OleDbException: Unrecognized database format 'F:\Program Files\devnz\gbpvr\gbpvr.mdb'.
at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection)
at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.OleDb.OleDbConnection.Open()
at GBPVR.Backend.Common.xcbcfc48b9705b7a2.xa19cc1d2df8cbd74()
at GBPVR.Backend.Common.x1d248470894f26c1.xec273cb62c940b66()
at Config.xfd6951461fe46d87.x1f0684532099dac8(Object xdf2e3583f942db7b, EventArgs xc4f45905cb1fc7ba)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box
I just recently built a new computer and am trying to get GB-PVR set up on it the way I had it on my old computer.
I'm using an ATI TV Wonder Elite, and that has Cyberlink Power Cinema software included. Power Cinema is awful software though, so I wasn't even going to bother installing it this time around, I was just going to install the drivers and the ATI remote control.... which is what I did. Everything seems to operate cleanly, I can change channels without trouble, audio plays smooth, but the video remains a black screen saying "Next Recording: (none scheduled)" in GB-PVR.
I did try running BDA MuxChecker, and as it said: "NO MULTIPLEXER FILTERS WHERE FOUND ON YOUR MACHINE. GB-PVR will not function correctly unless you have WinXP SP1 or higher, which has a built-in DVR-MS mux filter." I assumed that that was the problem.
After searching the net a bit I found comments about mux filters needed, and downloaded and set up these guys so that the MuxChecker would recognize them:
I really didn't want to install Power Cinema, since when I had it on my other computer I couldn't quite get it to leave well alone, as it was constantly taking over things I wanted GB-PVR to handle........ but I gave up, and did install it, thinking that that would solve my problem and I'd live with the drawbacks, but it didn't solve the problem.
I would have originally guessed some kind of codec problem, but when I ran the Tuning Assistant all of my channels were recognized. I can see the video in there clear as day as it scans for channels, but when I head back into GB-PVR everything is dead.
Greetings! I'm running version 0.99.5 and the setup has been working without a hitch for almost a year now. However, this week I noticed the shield did not record, and the scheduled recording did not fail since the tv guide showed that the channel 248 no longer existed!! I've checked zap2 it for details and cleared any duplicates, or unnecessary channels but channel 248 simply will not return. I've manually added the channel, deleted the recording device and re-installed, all to no avail. I did notice recently however that in the tv guide in the application, and the EWA that a duplicate of the channel exists (channel 248 masquerading as channel 2190), but I can't find it to delete it in the edit recording source screen as the listing stops at 2188!!?? I've included screenshots along with the log so I hope that is enough information. If anyone can help, it would be greatly appreciated, and if any additional info is needed, just let me know. thanks in advance!!
Im thinking of picking up a second cable box so i can record MORE channels not just the "basic cable" ones.
I get like 1700 channels ( i do not have hdtv)
Right now i have like 70 of the basic channels programmed on from the coaxil running thru the house.
If i pick up a box will i need a new tv tuner card? Or can i get like a usb IR blaster and get some software and gbpvr can change channel for recordings itself?
Hauppauge WINTV-PVR-150 PCI Interface Tuner Card has what appears to be a IR blaster.Im not sure what settings or software id need to get gbpvr to use that cards blaster. Or i could just buy a ir blaster.
Anyone with this setup care to explain what they have?
*(i wont be needing all 1700 channels just a select about 90 of so.)*
guessing i need a IR blaster or something. Anyone wanna explain that?
What i want is to have gbpvr send a signal out a device(ir blaster) all by itself when its time to change channel to record. I wont need to do anything? Am i correct in understanding this?
Which IR blaster do any of you use? I see a few listed in wiki.
All this transmission and receiving crap confuses me. As i use a USB receiver(i think) with a remote that came with my current card and gbpvr didnt need setup for that and it goes thru all the stuff fine, its just a remote nothing more. Not made to control a box.
Thanks all. Multiple questions and even tho i searched didnt find the exact answer i was looking for. Better to be safe then spend big money on a project of buying new box + parts.
In gbpvr viewing an xvid video, quality is horrible, when the video goes black or low light it shows a bunch of gray squares and stuff. However when I view the exact same video in windows media player it displays perfect(same computer and monitor).
It would be neat to have "stock ticker" information crawl probably at the bottom of your screen while watching to give you information taken from the internet, like stock, news, rss feeds, mail info, weather, etc., of course at your convenience with the push of a button
