I have been using the mvp for well over a year and never really had much of a problem. I did notice it getting stuck at the loading application screen about a month ago but I was able to get it to work after playing with it for about a hour. Once the dongle is loaded it works fine.
This morning when the power went out and came back on the mvp stays at the loading application screen. If I disable GBPVR and turn on hauppauge it comes up every time.
I even tried using hauppauge to load it and then disable it and flip on gbpvr to see if that helps. It doesn't then it constantly loops trying to find servers.
The logs are below.
It seems like it might be the TFTP server that is sending the data. Perhaps adding more logging around there. I will probably end up uninstalling and reinstalling gbpvr to try to fix it. I did try upgrading to the latest version but it did not fix it.
There are a few logs from different runs
7/30/2006 7:42:52 AM.968 VERBOSE [9] MVP Control thread waiting connection
7/30/2006 7:42:52 AM.984 VERBOSE [13] Closing shoutcast stream (stopStreaming requested)
7/30/2006 7:43:05 AM.718 VERBOSE [6] Received MVP Service Locator request
7/30/2006 7:43:05 AM.750 VERBOSE [6] Parsing MVP Service Locator request
7/30/2006 7:43:06 AM.109 VERBOSE [6] local address: 00:01:02:61:C2:B2 .... 192.168.1.201
7/30/2006 7:43:06 AM.109 VERBOSE [6] local address: 00:01:02:61:C2:B2 .... 192.168.1.201
7/30/2006 7:43:06 AM.125 VERBOSE [6] local address: 00:01:02:61:C2:B2 .... 192.168.1.201
7/30/2006 7:43:06 AM.125 VERBOSE [6] About construct MVP Service Locator request
7/30/2006 7:43:06 AM.125 VERBOSE [6] Sending MVP Service Locator response to C801A8C0:16882 (control: 5907, streaming: 8337)
7/30/2006 7:43:06 AM.125 VERBOSE [10] MVP Streaming thread got connection
7/30/2006 7:43:06 AM.125 VERBOSE [10] Linger set to zero
7/30/2006 7:43:06 AM.562 INFO [9] MVP Control thread got connection
7/30/2006 7:43:06 AM.562 VERBOSE [9] Linger set to zero
7/30/2006 7:43:08 AM.140 INFO [9] MVP mac address: 000DFE00110E
7/30/2006 7:43:08 AM.156 VERBOSE [9] MVP initConnection()
7/30/2006 7:43:08 AM.156 VERBOSE [9] MVP initConnection() - protocol version sent
7/30/2006 7:43:08 AM.156 VERBOSE [9] MVP initConnection() - protocol version ack: RFB 003.003
7/30/2006 7:43:08 AM.156 VERBOSE [9] getValue() loading new key/value into cache: /settings/MVPUseAlternatePixelFormat
7/30/2006 7:43:08 AM.156 VERBOSE [9] getValue: /settings/MVPUseAlternatePixelFormat : true
7/30/2006 7:43:08 AM.156 VERBOSE [9] Using alternate pixel format
7/30/2006 7:43:14 AM.984 VERBOSE [9] Y/Y2 buffer: 46901 bytes
7/30/2006 7:43:15 AM.015 VERBOSE [9] U/V buffer: 25402 bytes
7/30/2006 7:43:19 AM.656 VERBOSE [8] Received BOOTP request from client. bytesReceived: 300 address: 192.168.1.200
7/30/2006 7:43:19 AM.656 VERBOSE [8] Responsed to BOOTP request from client
7/30/2006 7:43:19 AM.781 VERBOSE [7] Received MVP TFTP request: dongle.bin
-------------------------------------
7/30/2006 7:54:13 AM.078 VERBOSE [9] getValue: /settings/OSDTransparency : 200
7/30/2006 7:54:13 AM.296 INFO [10] MVP Streaming thread starting
7/30/2006 7:54:13 AM.312 VERBOSE [1] Initializing skin helper for: .\skin\Blue\panels\NextRecording.xml
7/30/2006 7:54:13 AM.312 VERBOSE [1] Initializing skin helper for: .\skin\Blue\panels\Clock.xml
7/30/2006 7:54:15 AM.546 INFO [8] BOOTPWorkerThread() Hostname: Dell
7/30/2006 7:54:15 AM.546 INFO [6] ServiceLocatorThread() Hostname: Dell
7/30/2006 7:54:15 AM.546 INFO [8] BOOTPWorkerThread IP Address 192.168.1.201
7/30/2006 7:54:15 AM.546 INFO [6] IP Address 192.168.1.201
7/30/2006 7:54:15 AM.578 INFO [10] MVP Streaming thread Listening on port: 8337
7/30/2006 7:54:15 AM.578 VERBOSE [10] MVP Service Locator will resolve media port: 8337
7/30/2006 7:54:15 AM.578 VERBOSE [10] MVP Streaming thread waiting for connection
7/30/2006 7:54:15 AM.578 INFO [9] MVP Control thread Listening on port: 5906
7/30/2006 7:54:15 AM.578 VERBOSE [9] MVP Service Locator will resolve media port: 8337
7/30/2006 7:54:15 AM.578 VERBOSE [9] getValue() loading new key/value into cache: /settings/NetRadioBufferSize
7/30/2006 7:54:15 AM.578 VERBOSE [9] getValue: /settings/NetRadioBufferSize : 96000
7/30/2006 7:54:15 AM.578 INFO [9] NetRadio buffer size is: 96000
7/30/2006 7:54:15 AM.593 VERBOSE [9] MVP Control thread waiting connection
7/30/2006 7:54:15 AM.703 VERBOSE [12] Closing shoutcast stream (stopStreaming requested)
7/30/2006 7:55:41 AM.875 VERBOSE [8] Received BOOTP request from client. bytesReceived: 300 address: 192.168.1.200
7/30/2006 7:55:41 AM.875 VERBOSE [8] Responsed to BOOTP request from client
Just getting setup with TwinhanDTV Digital Terrestrial Card (model 3021). Are there any recommendations regarding best combination of drivers etc for this with GB-PVR? e.g.
- which BDA driver version from Twinhan is best to use (e.g. BDADriverV1.2.2.7)?
- which Video Decoder version (e.g. Cyberlink Video/SP decoder - v6.0.0.1402)?
- which mux (e.g. CyberLink MPEG Muxer, thmpgmux.ax, VERSION: 5.0.1307)
Just trying to get optimised performance. At the moment the image & sound is a little jumpy.
In release 0.97.13 page up/down has been added to the new Photo/Music/Video library screens. This works great on my PC, but how does this work on the MediaMVP? In previous releases I used the skip buttons for this, but this doesn't work anymore. Any ideas?
I want to integrate 4 wireless CCTV cameras into my GBPVR setup, I am planning on 4 receivers going into a quad multiplexer which will give a single output with 4 real time feeds in a quad view. My question is if I connect this signal to a PVR150 (I already have a nova cad for freeview) will it show up in the TV guide to select the "camera channel"? and will this work on my MVP too?
I have been wondering if, because of all my issues, if installing MCE would be any better than Pro. My HTPC is not internet connected as I update my EPG manually.
Does anyone know if MCE is a better option using Hauppauge's 150MCE card. A store I have used has a package special of a card, the OS & the remote package. If it proves there are less issues with MCE variant then I would serioulsy consider upgrading.
When I update the EPG, the program only downloads three days of program information from zap2it. How can increase the setting so that it will download two weeks of program information into the guide?
Just yet again swapping HDDs (in a better PC) and installing GB-PVR.
I'm having a basic problem running my xmltv script. Previously I just copied the executable xmltv binary I'd created onto a new HDD and it worked, however at the moment on the new PC if I go to a windows command window and then run my previous batch file I get the following:
C:\Gregs\bin\xmltv\XMLTV-~1.40A>xmltv tv_grab_au
Program too big to fit in memory
Anyone know what to do here? Is there some Window Command Windows memory setting I don't know about.
thanks
PS. I have moved from an older Intel to a dual core AMD platform.
