Is anyone else having a problem with the duplicate recording logic not working? Before this release, it was (for the few programs that seem to have the UID >.>) keeping dupilicates from being recorded but it seems that, now, duplicates are being recorded, again. Any ideas?
I've seen many Athlon XP-M socket A CPUs on eBay recently that are seemingly identical to the older Athlon XP socket A CPUs. Does anyone know if XP-M CPUs will work in a Mobo designed for the Athlon XP? (I'm looking to upgrade the speed of my PVR without replacing the mobo.)
This has happened to me a handful of times over the last week or two. I will open the config file, make a few changes, press ok -- and *poof*. Note that I do this over remote desktop, so I never actually see the bluescreen.
At any rate, when the system comes back up, I get a popup message that tells me that windows croaked due to a "device driver error" -- and gbpvr will not start up.
This is due to the fact that my config.xml file is trashed. The file now consists of 27k of little squares -- all on one line. These are the same little squares that you see if you read a text file and don't have the language installed.
I have attached my config.exe.log and you can see the little squares in there too.
As far as drivers go, for my 500, I have version 2.0.43.24103 installed.
I had this problem about a year ago with some pre-release drivers and now I'm seeing it again.
Recordings that are 10mins long show they're about 1min when playing back (GB-PVR and WMP). Recordings that are 30mins long show as being about 10mins etc. etc. Generally they playback OK but using FF/RW etc. makes things go a bit strange.
I'm using the latest drivers from shspvr but I've also swapped back to older drivers of various versions and still get the same thing.
Looking at the lastgraph.grf, I see an Encoder of some sort connected from the 656 pin on the capture filter then to the file writer. I don't remember seeing that Encoder before and it doesn't appear in graphs when my PVR-350 is being used. Maybe it's supposed to be there?
I'm confused as to why this suddenly started happening a few weeks ago when I don't remember having changed anything significant on my system.
I have Hauppauge PVR 150 PCI, only use TV Tuner (Analog). I can see LiveTV. Only LiveTV Modus can not direct to recorder and scheduler will recorder but 0 bytes. that is funny.
when I record in LiveTV then this fault: error object reference not set to an instance of an object
here is log (GBPVRRecordingService.exe-native.log)
Code:
02:25:34.968 INFO Log started
02:25:34.968 VERBOSE ConexantRecorder::StartRecording(1, 41, 203850000, 0)
02:25:34.968 VERBOSE target filename: C:\Mississippi Burning - Die Wurzel des Hasses_2_20060624_01550355.mpg
02:25:34.968 VERBOSE Capture Device is based on BlackBird architecture
02:25:34.968 VERBOSE Capture Device is using Conexant (derived) drivers
02:25:34.968 VERBOSE Loading filter names
02:25:34.968 VERBOSE Found names:
02:25:34.968 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
02:25:34.968 VERBOSE Hauppauge WinTV PVR PCI II Capture
02:25:34.968 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
02:25:34.968 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
02:25:35.218 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
02:25:35.484 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
02:25:35.484 VERBOSE Looking for encoder filter
02:25:35.484 VERBOSE GetMedium(pCapturePin) returns: {7D82C13C-452C-445F-A55E-90227B0F26C3}-00909463-00000000
02:25:35.484 VERBOSE getSetting(AutoDetectEncoderMethod)
02:25:35.484 VERBOSE About try all encoders until we find one that works...
02:25:35.484 VERBOSE Hauppauge WinTV PVR PCI II Encoder
02:25:35.500 VERBOSE Encoder.GetMedium(p656Pin) returns: {7D82C13C-452C-445F-A55E-90227B0F26C3}-00909463-00000000
02:25:35.500 VERBOSE Pin mediums match...
02:25:35.500 VERBOSE using instance: 1
02:25:35.531 VERBOSE FindFilterByName failed to locate filter: GB-PVR Writer
02:25:35.531 ERROR Failed to find Writer filter
02:31:37.312 VERBOSE ConexantRecorder::StopRecording()
02:31:37.421 VERBOSE ConexantRecorder::StartRecording(1, 41, 217980000, 0)
02:31:37.421 VERBOSE target filename: C:\Faustrecht in Kenia_2_20060624_02300350.mpg
02:31:37.421 VERBOSE Capture Device is based on BlackBird architecture
02:31:37.421 VERBOSE Capture Device is using Conexant (derived) drivers
02:31:37.421 VERBOSE Loading filter names
02:31:37.421 VERBOSE Found names:
02:31:37.421 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
02:31:37.421 VERBOSE Hauppauge WinTV PVR PCI II Capture
02:31:37.421 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
02:31:37.421 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
02:31:37.437 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
02:31:37.687 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
02:31:37.687 VERBOSE Looking for encoder filter
02:31:37.687 VERBOSE GetMedium(pCapturePin) returns: {7D82C13C-452C-445F-A55E-90227B0F26C3}-00909463-00000000
02:31:37.687 VERBOSE getSetting(AutoDetectEncoderMethod)
02:31:37.687 VERBOSE About try all encoders until we find one that works...
02:31:37.687 VERBOSE Hauppauge WinTV PVR PCI II Encoder
02:31:37.703 VERBOSE Encoder.GetMedium(p656Pin) returns: {7D82C13C-452C-445F-A55E-90227B0F26C3}-00909463-00000000
02:31:37.703 VERBOSE Pin mediums match...
02:31:37.703 VERBOSE using instance: 1
02:31:37.718 VERBOSE FindFilterByName failed to locate filter: GB-PVR Writer
02:31:37.718 ERROR Failed to find Writer filter
A friend has suddenly lost all entries in his TV Guide. The problem seemed to start when he added another channel to the xmltvnz bat file but this may be coincidence. I have looked at this bat file and it looks OK. The xml file looks OK, too. I have re-created the xml file, as well, but no result. I have emptied the EPG and updated it several times but still no guide data shows. The recordings are being displayed OK so the database doesn't appear to be totally corrupted. The guide has been updating since Mon night as we have seen a new channel appear that was added Mon night.
I can't see anything obvious in the logs but they are attached.
It might be me missing something, but is there a way to set GBPVR to automatically delete failed recordings of shows? I don't have my computer on all the time, and need to regularly go out to delete each entry when it misses a show.
If it is not in GB-PVR...maybe this is something that could go in?
I have been running gbpvr on a dedicated box consisting of an amd athlon-xp 1600, with 512 ram....and a 200 gig 7200 rpm hard drive just for storage. I just picked up a spare machine from a friend that has a faster proc(2.8 pentium) but less ram (128 MB- but i might have another stick of 128 for it). I'm looking for some feedback as to whether gbpvr seems to benefit more from proc, or ram....since i've been thinking of moving it over to this intel machine. On that same note, anyone done a move to another computer and been able to basically clone gbpvr, or will i have to do a fresh install and lose the link to all my recordings and settings?
p.s.- all the other hardware will be moved over....since the intel machine is just cpu-ram-and motherboard, but windows will have to be re-installed obviously, hence my dilemma.
