0.97.7 doesn't stop recording

[ggee]

Since I have upgraded to 0.97.7, I amn having problems with gbpvr not knowing when to quit. The two times it has recorded since I upgraded a few days ago, it would start a recording and keep going until it ran out of disk space. The last recording created a 30GB file. I am attaching the logs. The last recording was Tracks Ahead betwen 9:30 and 10:00 AM on the 27th.

Greg

[ggee]

Just to add some more detail. It might not be that it didn't stop recording, I really can't tell, because I checked back after 30 minutes of my next recording and it had already created a 30GB file again and filled the drive. So it seems to be dumping huge amounts of data into that file. I have no idea what is in it because wmplayer chocks if I try and open a 30GB file.



Greg

[ggee]

Another update. I decided to start the Config app, open each capture setup and then close it by clicking ok, ok, ... Then I sent and started a manual recording. This one seems to be creating the file at a normal rate. Even the GBPVRRecordingService.exe-native.log looks different.

The bad recording had the file end something like this.
19:55:00.296 VERBOSE Loading filter names
19:55:00.296 VERBOSE Found names:
19:55:00.296 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
19:55:00.296 VERBOSE Hauppauge WinTV PVR PCI II Capture
19:55:00.312 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
19:55:00.312 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
19:55:00.406 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
19:55:00.906 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
19:55:00.953 VERBOSE put_Mode(AMTUNER_MODE_TV)
19:55:00.953 VERBOSE put_CountryCode(2)
19:55:00.968 VERBOSE put_TuningSpace(2)
19:55:00.968 VERBOSE put_InputType(0, 0)
19:55:00.968 VERBOSE put_ConnectInput(0)
19:55:00.968 VERBOSE put_Channel(50, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
19:55:01.140 VERBOSE get_VideoFrequency() returns 379250000
19:55:01.140 VERBOSE get_CountryCode() returns 2
19:55:01.140 VERBOSE About to query available formats
19:55:01.140 VERBOSE ConexantRecorder::SetConfigurationDefault()
19:55:01.156 VERBOSE getSetting(EnableTeleText)
19:55:01.906 VERBOSE getSetting(ListGraphFilters)
19:55:01.906 VERBOSE Graph contains the following filters:
19:55:01.906 VERBOSE - GB-PVR Writer
19:55:01.906 VERBOSE - Capture
19:55:01.906 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
19:55:01.906 VERBOSE - TV Audio
19:55:01.906 VERBOSE - TV Tuner
19:55:01.906 VERBOSE getSetting(SaveGraphFiles)
19:55:02.343 VERBOSE ConexantRecorder::StartRecording() done
20:39:47.796 VERBOSE ConexantRecorder::StopRecording()

The good recording (I think) is still going but it looks like the following from the same point. Below is a lot more logging occuring.

20:42:52.968 VERBOSE Loading filter names
20:42:52.968 VERBOSE Found names:
20:42:52.968 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
20:42:52.968 VERBOSE Hauppauge WinTV PVR PCI II Capture
20:42:52.968 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
20:42:52.968 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
20:42:53.015 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
20:42:53.250 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
20:42:53.265 VERBOSE Looking for encoder filter
20:42:53.281 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
20:42:53.296 VERBOSE GetMedium(pCapturePin) returns: {7D82C13C-452C-445F-A55E-90227B0F26C3}-008819BF-00000000
20:42:53.296 VERBOSE getSetting(AutoDetectEncoderMethod)
20:42:53.296 VERBOSE About try all encoders until we find one that works...
20:42:53.296 VERBOSE Hauppauge WinTV PVR PCI II Encoder
20:42:53.312 VERBOSE Encoder.GetMedium(p656Pin) returns: {7D82C13C-452C-445F-A55E-90227B0F26C3}-008819BF-00000000
20:42:53.312 VERBOSE Pin mediums match...
20:42:53.312 VERBOSE using instance: 1
20:42:53.343 VERBOSE put_Mode(AMTUNER_MODE_TV)
20:42:53.343 VERBOSE put_CountryCode(2)
20:42:53.343 VERBOSE put_TuningSpace(2)
20:42:53.343 VERBOSE put_InputType(0, 0)
20:42:53.343 VERBOSE put_ConnectInput(0)
20:42:53.343 VERBOSE put_Channel(50, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
20:42:53.531 VERBOSE get_VideoFrequency() returns 379250000
20:42:53.531 VERBOSE get_CountryCode() returns 2
20:42:53.531 VERBOSE About to query available formats
20:42:53.531 VERBOSE ConexantRecorder::SetConfigurationECP()
20:42:53.531 INFO Firmware Version 2.5.32



Audio Firmware Version 2.0.127



Model 26552 Rev F0A3

Serial No: 8919487

Tuner[1]: Model 103 (TCL MFNM05-4) (With Radio)

Decoder: 30

AudioIC: 37



Input Map: C= 0x000f, S= 0x0003


20:42:53.562 VERBOSE getSetting(EnableTeleText)
20:42:54.484 VERBOSE getSetting(ListGraphFilters)
20:42:54.484 VERBOSE Graph contains the following filters:
20:42:54.500 VERBOSE - GB-PVR Writer
20:42:54.500 VERBOSE - Encoder
20:42:54.500 VERBOSE - Capture
20:42:54.500 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
20:42:54.500 VERBOSE - TV Audio
20:42:54.531 VERBOSE - TV Tuner
20:42:54.531 VERBOSE getSetting(SaveGraphFiles)
20:42:54.656 VERBOSE ConexantRecorder::StartRecording() done

It appears that after an upgrade, I need to open each capture source and resave to make sure things are right.

I'll update as well when the next scheduled recording occurs.

Greg

[yavor76]

I have the same problem. I hit Ctrl+K to start recording. I choose to record until exit live TV. But the recording continue after exiting. I close GBPVR and GBPVR recording service too and when I start it again the recording is there and continue.I can't stop it. Ctrl+Alt+Del and force kill them didn't help too.
The recording option going unusable for me

My version is GBPVR09707.
TV tuner : ATI Theatre 550
Motherboard : Epox - EP8RDA Pro

[ATTACHMENT NOT FOUND] these are my log files

... restarting of the PC did not help. The only useful operation is cancel recording in the "Recordings" menu. And if it's needed my drivers are the updated ATI drivers for ATI Theatre 550 - Version 6.14.10.134 (6-3_xp_t550_wdm_30895) (with fixed TV standart remembering)