Help with Nova-t-stick

[ant192]

This is kinda a last resort help me post. I got a nova-t-stick (usb) installed it all with the winTv software that was bundled with it. It worked fine but i thought that the software was a bit lame, so i downloaded GBPVR which looks much better.
My problem is this, when i create a capture source i select bda recording plugin but when i ask it to show only devices connected to the machine it say "no known cards detected on this machine"
If i select my card manually from the drop down list it later tells me "failed to locate configured bda device"
The mux checker tells me there is no filter installed.
It goes without saying that the card is plugged in usb 2, wintv200 plays channels fine.
any help much appreciated
thanks
anthony

[sub]

Can you run the filtercheck utility, then zip and attach the resulting filtercheck.log? http://forums.gbpvr.com/showpost.php?p=1...ostcount=6

[ant192]

thanks

10:31:31.156 INFO Log started
10:31:31.156 INFO Filter Check v1.0
10:31:31.156 INFO
10:31:31.156 INFO
10:31:31.156 INFO Checking AM_KSCATEGORY_CAPTURE filters
10:31:31.187 INFO found: SB Audigy 2 ZS MIDI IO [D880]
10:31:31.203 INFO - (input) MIDI
10:31:31.203 INFO - (output) Output1
10:31:31.203 INFO - (output) MIDI
10:31:31.203 INFO - (input) Input3
10:31:31.203 INFO
10:31:31.203 INFO found: SB Audigy 2 ZS Audio [D880]
10:31:31.218 INFO - (output) Recording Control
10:31:31.218 INFO - (input) ADC
10:31:31.218 INFO - (input) Volume
10:31:31.218 INFO - (output) DAC
10:31:31.218 INFO - (input) SPDIF Interface
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO Checking AM_KSCATEGORY_ENCODER filters
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO Checking AM_KSCATEGORY_CROSSBAR filters
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO Checking AM_KSCATEGORY_TVTUNER filters
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO Checking AM_KSCATEGORY_TVAUDIO filters
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO Checking AM_KSCATEGORY_VBICODEC filters
10:31:31.218 INFO found: NABTS/FEC VBI Codec
10:31:31.218 INFO - (input) VBI
10:31:31.218 INFO - (output) NABTS
10:31:31.218 INFO - (input) HWNABTS
10:31:31.218 INFO
10:31:31.218 INFO found: CC Decoder
10:31:31.218 INFO - (input) VBI
10:31:31.218 INFO - (output) CC
10:31:31.218 INFO - (input) HWCC
10:31:31.218 INFO
10:31:31.218 INFO found: WST Codec
10:31:31.218 INFO - (input) VBI
10:31:31.218 INFO - (output) Teletext
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO
10:31:31.218 INFO Checking KSCATEGORY_BDA_NETWORK_TUNER filters
10:31:31.218 INFO found: WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0)
10:31:31.234 INFO - (input) Input0
10:31:31.234 INFO - (output) MPEG2 Transport
10:31:31.234 INFO
10:31:31.234 INFO
10:31:31.234 INFO
10:31:31.234 INFO Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters
10:31:31.234 INFO found: BDA Slip De-Framer
10:31:31.234 INFO - (input) NABTS
10:31:31.234 INFO - (output) IPv4
10:31:31.234 INFO
10:31:31.234 INFO found: BDA MPE Filter
10:31:31.234 INFO - (input) MPE
10:31:31.234 INFO - (output) IPv4
10:31:31.234 INFO
10:31:31.234 INFO found: WinTV Nova-T Stick DVB-T Capture (Dev1 Path0)
10:31:31.250 INFO - (input) MPEG2 Transport
10:31:31.250 INFO - (output) MPEG2 Transport
10:31:31.250 INFO

[sub]

Try adding this to your bda.ini:

[Hauppauge Nova-T-Stick type2]
TUNING_TYPE=DVB-T
FILTER_TUNER=WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0)
FILTER_CAPTURE=WinTV Nova-T Stick DVB-T Capture (Dev1 Path0)
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

[ant192]

thanks for your help
I added the text to bda.ini. It will still not auto-detect a card, and when i select Hauppauge Nova-T-Stick type2 and try to scan it says cannot find. It then begins scanning and an unhandled exception error dialog appears. with the following log.
[ATTACHMENT NOT FOUND]
Any Ideas?
any help is much appreciated

[sub]

Try this:

[Hauppauge Nova-T-Stick type2]
TUNING_TYPE=DVB-T
FILTER_TUNER="WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0) "
FILTER_CAPTURE="WinTV Nova-T Stick DVB-T Capture (Dev1 Path0) "
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

I'm guessing they've got a blank space at the end of the name like they did with there other mode. If this doesnt work, zip and attach the config.exe-native.log and I'll take another look.