UK Freeview Mendip TX Rescan Problem - And Solution!!

[Lao Pan]

There has been yet another frequency change on the Mendip Transmitter this morning - No problem I thought Sub has included the ini I had created for Stage 3: The Final - But after a bit of watching this evening suddenly realized half the channels were blank and several were missing.

After a bit of a search found that a week or two back the men who decide decided to change the frequencies again :mad:
Frequencies are now:
61
54
48
67
52
58

Put the attached ini file in the Public/NPVR/Tuning/DVB-T Folder and rescan using United Kingdom West Mendip Stage 2c 280911 settings

Now got another rescan due in March 2012 frequency TBA - great

[DanielP]

Thanks very much for this. Pity they are still using 67 for a bit longer- it comes and goes for me alot. Can't wait until they eventually finish the job off. It has taken YEARS before everything is in the right place and up to full power!!

[Lao Pan]

This should have been completed by 6am - rescheduled to 1pm but looks like now complete - maybe.

The attached ini should work - haven't tried it yet - work in the way.

These are the corrected mux numbers in Mux order including HD mux at no 3 so may look like its not doing anything for a while on none T2 tuners.
The Arqiva Mux A & B are reversed from the original published frequencies. :confused:

This should be the final DSO frequencies all at 100KW full power.

2013 BBC will be moving from Ch 61.

[Graham]

The attached ini should work - haven't tried it yet - work in the way.

Works for me. Thank you.

[martint123]

The Arqiva Mux A & B are reversed from the original published frequencies. :confused:

Belmont did the same - but swapped to where they were supposed to be a few weeks later! as in

# Arqiva A & Arqiva B at Belmont will temporarily operate on channels 60 and 53 respectively (i.e. the reverse of their final channel allocations) from switchover until November 2011.