Scan Misses Channel (CH 9 Australia)

[jestermgee]

Hi

I have searched this forum with no result.

I have a DNTV Dual Hybrid Tuner S2 card with dual digital tuners that is recognized by GBPVR just fine and both tuners seem to work.

The problem is that when I scan for channels, it finds every channel in my area (ABC, SBS, 7, 10) except channel 9. I know I have a good signal, all other channels get a strength of around 70 and signal of 100.

There was some basic software "hypermediacenter" that came with my card that scans all channels in fine.

What reason could there be for GBPVR missing a channel?

The other thing is that some channels display very badly. There seems to be a double picture displayed that flickers but I am sure this is a codec issue somehow.

Any hints would be great.

[sub]

I have a DNTV Dual Hybrid Tuner S2 card with dual digital tuners that is recognized by GBPVR just fine and both tuners seem to work.

The problem is that when I scan for channels, it finds every channel in my area (ABC, SBS, 7, 10) except channel 9. I know I have a good signal, all other channels get a strength of around 70 and signal of 100

Do a scan then zip and attach the logs and I'll take a look.

You could try clicking the 'advanced bda settings' button on the screen where you selected your device type, then enable the 'ignore PMT CRC errors during scan' option.

The other thing is that some channels display very badly. There seems to be a double picture displayed that flickers but I am sure this is a codec issue somehow.

This will almost certainly come down to the video decoder you're using. Alternatively it could also be your video card drivers though.

[jestermgee]

Man you are quick with your replies....

I will attach a log when I get a chance. I'm at work at the mo and thought i'd ask since I was stuffing round lastnight and I wanted some plan of attack for when I go home.