Yesterday I had to flush my OS and reload everything. All went pretty except now I am having some flukey things happening with Directv.exe when changing channels. Some of these work just fine and others broadcast digits different from what I am keying in. Any thoughts?
This is the same equipment that was working fine before. I am running XP Pro on a 1.6mhz Core 2 with 3gb of ram. My params setting is "-port com3 -baud 9600 -box D10100 -set NEW #{channel}". When looking at the port is is set up for 9600, 8 data bits, no parity, 1 stop bit, no flow control. Have both "padding" boxes checked.
To be clear, this was working fine prior to rebuilding the OS. I had to do that because something got screwed up so badly it would no longer boot.
Just tried something else to verify the problem. I key 501 and I get 501. 532 gives 437, 603 gives 603. Is is consistent.
Thanks.
This is the same equipment that was working fine before. I am running XP Pro on a 1.6mhz Core 2 with 3gb of ram. My params setting is "-port com3 -baud 9600 -box D10100 -set NEW #{channel}". When looking at the port is is set up for 9600, 8 data bits, no parity, 1 stop bit, no flow control. Have both "padding" boxes checked.
To be clear, this was working fine prior to rebuilding the OS. I had to do that because something got screwed up so badly it would no longer boot.
Just tried something else to verify the problem. I key 501 and I get 501. 532 gives 437, 603 gives 603. Is is consistent.
Thanks.