Live TV and recordings do not match

greg in kansas · 2012-12-26, 08:44 PM

recordings record fine on the right channel but live tv the mapping is not right, help please.

Greg

Jaggy · 2012-12-26, 09:20 PM

The only thing I can think of is in GB-PVR it uses the tuner cards from the top down for recordings & from the bottom up for live tv, so if you have more than one card it's most likely that you have mapped the channels right on the top card(s) but wrong on the bottom card(s)

***sub*** · 2012-12-26, 09:44 PM

greg in kansas Wrote:recordings record fine on the right channel but live tv the mapping is not right, help please.

If it's a digital channel, and you're recording to .ts, then it sounds like the broadcaster has changed the audio/video PIDs. You'll probably need to rescan and remap that channel.

greg in kansas · 2012-12-27, 12:17 AM

Ok, I'll try a re map been over 2 years. I thought my data base might be bad. Different audio/video PIDs for Rec vs live?

Thanks so much
Greg

***sub*** · 2012-12-27, 01:04 AM

greg in kansas Wrote:Different audio/video PIDs for Rec vs live?

Yes, with .ts. GBPVR stored the PIDs during scan, and needed these for live tv. It didn't need them when playing a recording - it'd find them by looking at the file.

NextPVR did away with this annoying problem, and dynamically determines the PIDs for live tv aswell.

greg in kansas · 2013-02-22, 01:03 PM

Are the PIDs stored in two different places in the database? I can find only one "SOURCE_CHANNEL_MAPPING".

Thanks for all your work Sub

Greg

sub Wrote:Yes, with .ts. GBPVR stored the PIDs during scan, and needed these for live tv. It didn't need them when playing a recording - it'd find them by looking at the file.

***sub*** · 2013-02-22, 05:27 PM

greg in kansas Wrote:Are the PIDs stored in two different places in the database? I can find only one "SOURCE_CHANNEL_MAPPING".

Those are the PIDs used for live tv. When playback a recording, GBPVR looks in the file to find the PIDs (ie not in the database).

greg in kansas · 2013-02-22, 06:04 PM

Thanks Sub
Are the PIDS that are used for recordings in the database?

Greg

sub Wrote:Those are the PIDs used for live tv. When playback a recording, GBPVR looks in the file to find the PIDs (ie not in the database).

***sub*** · 2013-02-22, 06:35 PM

No, they're not in the database.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Can't view recordings on pc	jerry430	8	6,694	2013-01-21, 07:27 PM Last Post: jerry430
	Live TV not showing anything although recordings are OK. Pls advise.	seymoria	8	4,712	2012-08-07, 05:07 PM Last Post: ACTCMS
	CSI Miami Recordings Always In Spanish	ga_mueller	6	4,536	2012-06-12, 12:41 AM Last Post: mikeh49
	Recordings missing after switching hard drive	tegat	8	4,949	2011-12-21, 03:00 AM Last Post: tegat
	Live TV Locks Onto Different Channel	persim	1	2,292	2011-10-24, 06:33 PM Last Post: sub
	Recording fails but only on one channel (live viewing still works)	dshoup	5	3,472	2011-09-19, 01:15 AM Last Post: sub
	Recordings and live TV fail with TS mux	dvasco	4	2,651	2011-06-22, 05:47 PM Last Post: dvasco
	Stream errors in recordings with GBPVR	seymoria	11	4,420	2011-06-19, 06:44 PM Last Post: seymoria
	How to kill an orphan Live TV recording?	martint123	2	2,318	2011-05-16, 05:33 PM Last Post: martint123
	Low signal warning when using live TV	wodger	4	2,626	2011-05-13, 08:11 AM Last Post: wodger