2 or more LNB not working

[WIPE]

Hi,

I just tried nPVR v.5.
Install is no problem with your guide. The problem show upp when i want to scan more then one sattellite. I get error "Missing parameters for satB"
If i try with only one single sat. it scans nice. but with two or more satellites it will not scan.
i post the logfile also.

[37] Got request [::1]: /services/service
[37] method=setting.scan.start
[37] parameters:
[37]    method: setting.scan.start
[37]    format: json
[37]    source_id: 21
[37]    scanType: four-sat
[37]    satA: 0049 / Astra 4A/SES 5 (4.9E)
[37]    satALOF1: 9750
[37]    satALOF2: 10600
[37]    satALOFSwitch: 11700
[37]    satB: 3592 / Thor 5/6/7/Intelsat 10-02 (0.8W)
[37]    satBLOF2: 10600
[37]    satBLOFSwitch: 11700
[37]    satC: none
[37]    satCLOF1: 9750
[37]    satCLOF2: 10600
[37]    satCLOFSwitch: 11700
[37]    satD: none
[37]    satDLOF1: 9750
[37]    satDLOF2: 10600
[37]    satDLOFSwitch: 11700
[37]    sid: b4be0641-d7ad-490e-8650-5d2c13cee086
[37]    client_ip: ::1
[37]    user_agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.102 Safari/537.36 Edge/18.18362
[37]    host_callback: localhost:8866
[37] setting.scan.start
2019-12-16 19:07:24    Renewing session: b4be0641-d7ad-490e-8650-5d2c13cee086
[37] CaptureSource.LoadAll()
[37] Missing parameters for satB
[37] {"stat":"Failed","code":11,"msg":""}

[59] Got request [::1]: /services/service
[59] method=system.logs
[59] parameters:
[59]    method: system.logs
[59]    format: json
[59]    sid: b4be0641-d7ad-490e-8650-5d2c13cee086
[59]    client_ip: ::1
[59]    user_agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/70.0.3538.102 Safari/537.36 Edge/18.18362
[59]    host_callback: localhost:8866
[59] Zipping logs...
[59] Flushing logs

[sub]

It looks like the satBLOF1 parameter is missing.

What tuner are you using?

[WIPE]

I use TeVii S464 BDA DVB-S2

It works with other dvb-software. But just to be sure i will go up to the roof tomorrow and glean the LNB-contacts.

[sub]

For the next build I fixed the issue with the satBLOF1 setting. I suspect this isn't the cause of your problem though.

Unfortunately the disqec control wasn't part of Microsoft's BDA standard, so different each manufacturers has implemented it a different way. I suspect TeVii are doing something different to the other approaches I have to use for other devices. I don't have any TeVii devices, so I've never tried it on these.

[WIPE]

I will try the new build as soon as i can find it.
I have tried DVBViewer and also earlier ArgusTV and MediaPortal. All is working with the TeVii S2 card. I will also build a new computer this weekend with Hauppauge PCTV DVB-S2 Stick 461e on and try more.