2025-03-28, 09:25 AM
Hello,
I experimented different scanning duration for the DVB/ATSC EPG (found under "Settings > Guide > (cog icon, for DVB/ATSC EPG, on the right-hand side))"). Default value is 60 sec.
I identified a sweet spot at 6 sec.
When set to 5 seconds, the DVB/ATSC EPG doesn't have enough time to download the data. When set to 6 seconds, it successfully downloads it.
This is only my own experience; YMMV.
I could imagine users with many channels, polling the DVB/ATSC signal, for a minute, for each channel... This could take a long time, even if at night it's less problematic.
What about reducing the default value to, maybe, 10 seconds?
Maybe you have good reason to set it to 60 seconds by default (I don't know).
Thank you!
I experimented different scanning duration for the DVB/ATSC EPG (found under "Settings > Guide > (cog icon, for DVB/ATSC EPG, on the right-hand side))"). Default value is 60 sec.
I identified a sweet spot at 6 sec.
When set to 5 seconds, the DVB/ATSC EPG doesn't have enough time to download the data. When set to 6 seconds, it successfully downloads it.
This is only my own experience; YMMV.
I could imagine users with many channels, polling the DVB/ATSC signal, for a minute, for each channel... This could take a long time, even if at night it's less problematic.
What about reducing the default value to, maybe, 10 seconds?
Maybe you have good reason to set it to 60 seconds by default (I don't know).
Thank you!
