2005-06-29, 12:38 AM
Tonight I had scheduled a recording to start @1900 with a 1 minute pad at the beginning. A few minutes ago I noticed that it did not record the complete show, instead I got about a half second of it.
I flipped through the logs and this was all that I could find that was dated tonight and around the approximate time of the problem:
Please help. :confused:
I flipped through the logs and this was all that I could find that was dated tonight and around the approximate time of the problem:
Please help. :confused:
Quote:gbpvrrecordingservice.exe-native.log
18:29:00.832 VERBOSE getSetting(SaveGraphFiles)
18:29:00.832 VERBOSE ConexantRecorder::StartRecording() done
18:59:00.089 VERBOSE ConexantRecorder::StopRecording()
18:59:00.299 VERBOSE ConexantRecorder::StartRecording(1, 1, 4, 0)
18:59:00.319 VERBOSE Capture Device is based on BlackBird architecture
18:59:00.319 VERBOSE Capture Device is using Conexant (derived) drivers
18:59:00.319 VERBOSE Loading filter names
18:59:00.319 VERBOSE Found names:
18:59:00.319 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
18:59:00.319 VERBOSE Hauppauge WinTV PVR PCI II Capture
18:59:00.319 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
18:59:00.319 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
18:59:00.329 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
18:59:00.530 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
18:59:00.530 VERBOSE Looking for encoder filter
18:59:00.530 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
18:59:00.560 VERBOSE ConnectPins: '656' to '656'
18:59:00.730 VERBOSE ConnectPins failed!
18:59:00.730 VERBOSE put_Mode(AMTUNER_MODE_TV)
18:59:00.730 VERBOSE put_CountryCode(1)
18:59:00.730 VERBOSE put_TuningSpace(1)
18:59:00.730 VERBOSE put_InputType(0, 0)
18:59:00.730 VERBOSE put_ConnectInput(0)
18:59:00.730 VERBOSE put_Channel(4, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:59:00.930 VERBOSE get_VideoFrequency() returns 67250000
18:59:00.930 VERBOSE get_CountryCode() returns 1
18:59:00.940 VERBOSE About to query available formats
18:59:00.950 VERBOSE Recorder::SetConfigurationECP()
18:59:00.960 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26052 Rev C185
Serial No: 7577691
Tuner: 85
Decoder: 30
AudioIC: 37
IR
Input Map: C= 0x000f, S= 0x0003
18:59:01.050 VERBOSE getSetting(ListGraphFilters)
18:59:01.050 VERBOSE Graph contains the following filters:
18:59:01.050 VERBOSE - GB-PVR Writer
18:59:01.050 VERBOSE - Encoder
18:59:01.050 VERBOSE - Capture
18:59:01.050 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
18:59:01.050 VERBOSE - TV Audio
18:59:01.050 VERBOSE - TV Tuner
18:59:01.050 VERBOSE getSetting(SaveGraphFiles)
18:59:01.050 VERBOSE ConexantRecorder::StartRecording() done
18:59:01.301 VERBOSE ConexantRecorder::StopRecording()
18:59:01.631 VERBOSE ConexantRecorder::StartRecording(1, 1, 3, 0)
18:59:01.631 VERBOSE Capture Device is based on BlackBird architecture
18:59:01.631 VERBOSE Capture Device is using Conexant (derived) drivers
18:59:01.631 VERBOSE Loading filter names
18:59:01.631 VERBOSE Found names:
18:59:01.631 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
18:59:01.631 VERBOSE Hauppauge WinTV PVR PCI II Capture
18:59:01.631 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
18:59:01.631 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
18:59:01.661 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
18:59:01.831 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
18:59:01.831 VERBOSE Looking for encoder filter
18:59:01.831 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
18:59:01.871 VERBOSE ConnectPins: '656' to '656'
18:59:01.982 VERBOSE ConnectPins failed!
18:59:02.042 VERBOSE put_Mode(AMTUNER_MODE_TV)
18:59:02.042 VERBOSE put_CountryCode(1)
18:59:02.042 VERBOSE put_TuningSpace(1)
18:59:02.042 VERBOSE put_InputType(0, 0)
18:59:02.042 VERBOSE put_ConnectInput(0)
18:59:02.042 VERBOSE put_Channel(3, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:59:02.262 VERBOSE get_VideoFrequency() returns 61250000
18:59:02.262 VERBOSE get_CountryCode() returns 1
18:59:02.272 VERBOSE About to query available formats
18:59:02.272 VERBOSE Recorder::SetConfigurationECP()
18:59:02.292 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26052 Rev C185
Serial No: 7577691
Tuner: 85
Decoder: 30
AudioIC: 37
IR
Input Map: C= 0x000f, S= 0x0003
18:59:02.392 VERBOSE getSetting(ListGraphFilters)
18:59:02.392 VERBOSE Graph contains the following filters:
18:59:02.392 VERBOSE - GB-PVR Writer
18:59:02.392 VERBOSE - Encoder
18:59:02.392 VERBOSE - Capture
18:59:02.392 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
18:59:02.392 VERBOSE - TV Audio
18:59:02.392 VERBOSE - TV Tuner
18:59:02.392 VERBOSE getSetting(SaveGraphFiles)
18:59:02.392 VERBOSE ConexantRecorder::StartRecording() done
19:00:00.145 VERBOSE ConexantRecorder::StopRecording()