Avermedia m755

[dadnz]

Hi guys anyone had any luck getting this board to work?
thaks

[stig]

I don't think this card has BDA drivers so you could try
http://gbpvr.com/pmwiki/pmwiki.php/Plugi...reRecorder
"The Software Recorder plugin allow you to use standard WDM drivers for a capture card that does not support hardward based MPEG2 compression with GB-PVR."

[dadnz]

its a analog board so shouldn't need bda drivers?

[stig]

is this your card
http://www.specialtech.co.uk/spshop/cust...t=0&page=1


Hardware information
* PCI tuner board with NTSC/PAL/SECAM Video standards.
* TV video decoder
* Supports S-Video input, composite video input and stereo audio input (L/R) on
the front panel of the system.
* Supporting full NTSC- resolution (720 x 480), PAL (720 x 5
* PCI 2.1 compliant
* High quality real-time encoding (I-,B-,and P-frames)
* Supports MPEG-2 (MP@ML,SP@ML) and MPEG-1
* 525/60(NTSC): up to 720 * 480 @ 30fps
* 525/50(PAL): up to 720 * 576 @ 25fps
* Video bit rate: MPEGII standard up to 12M bit/s
* Bit rate encoding types: VBR / CBR
* Audio compressed format: MPEGI layer2
* Audio bit rate up to 384kbit/s
* Audio Sample Rate: 32KHz, 44.1KHz, 48KHz


Software
* [SIZE="3"]Supports Microsoft Windows WDM[/SIZE] streaming architecture
* Plug & Play installation
* WHQL Logo Certification for Windows XP
* Supports sleep mode (ACPI and Power Managem
* 30 fps capture and preview for NTSC
* 25 fps capture and preview for PAL
* VBI data services support
* Front and rear A/V input switching function.
* Capable of sending raw video for game mode simultaneously with MPEG-2 bit streams
* MCE (Media Center Edition) 2005 Support

[dadnz]

yup thats the one

[stig]

http://gbpvr.com/pmwiki/pmwiki.php/P...ftwareRecorder
"The Software Recorder plugin allow you to use standard WDM drivers for a capture card that does not support hardward based MPEG2 compression with GB-PVR."

[dadnz]

is this not a hardware decoder board? and thks for the help too stig

[stig]

you need to ask sub but i think this card has support yet if I'm wrong someone will post and say different

happy 2 help

[stig]

well i now think that yoy may be able to get your card working you need to talk to sub
the info you may need is this found with a little help from mediaportal
AVerMedia AVerTV Video Capture (M755)

capabilities tv="true"
radio="false"
mpeg2="true"
mce="true"
sw="false"
bda="false"/
<tv>
<interface cat="encoder" video="" audio="" mpeg2="0"/>

<filter cat="tvtuner" name="AVerMedia AVerTV Tuner (AF2)" checkdevice="true"/>
<filter cat="tvaudio" name="AVerMedia AVerTV TvAudio (AF2)" checkdevice="true"/>
<filter cat="crossbar" name="AVerMedia AVerTV Crossbar (AF2)" checkdevice="true"/>
<filter cat="capture" name="AVerMedia AVerTV Video Capture (AF2)" checkdevice="true"/>
<filter cat="encoder" name="AVerMedia AVerTV Encoder (AF2)" checkdevice="true"/>

<connection sourcefilter="tvtuner" sourcepin="0" sinkfilter="crossbar" sinkpin="%tvtuner%"/>
<connection sourcefilter="tvtuner" sourcepin="1" sinkfilter="tvaudio" sinkpin="0"/>
<connection sourcefilter="tvaudio" sourcepin="0" sinkfilter="crossbar" sinkpin="%audiotuner%"/>
<connection sourcefilter="crossbar" sourcepin="0" sinkfilter="capture" sinkpin="0"/>
<connection sourcefilter="crossbar" sourcepin="1" sinkfilter="capture" sinkpin="1"/>
<connection sourcefilter="capture" sourcepin="3" sinkfilter="encoder" sinkpin="0"/>

[sub]

If its got on board MPEG-2 encoder hardware, it might work, but only if its directshow filters are layed out in a similar way to the Hauppauges.

You'd need to open direct.ini and copy one of the sections that are there to a new section called [Avermedia M755], then insert the appropriate names for your devices. You can find the names using GraphEdit (google for it).