2006-12-10, 06:44 PM
I am struggling with my Hauppauge card:
http://forums.nextpvr.com/showthread.php?t=21728
I have also a Pinnacle card, so I replaced the Hauppauge.
(uninstalled the software too...)
I only loaded the drivers, not the Pinnacle software.
The GB-PVR config tab: capture sources: capture card type has been
set to Pinnacle PCTV 110i Capture Device, I had added to the direct.ini
the following:
[Pinnacle PCTV 110i Capture Device]
INIT_MODE=DEFAULT
INIT_MSP=0
SUPPORTS_FM_RADIO=1
FILTER_CROSSBAR=Pinnacle PCTV 110i BDA Analog Xbar
FILTER_CAPTURE=Pinnacle PCTV 110i BDA Analog Capture
FILTER_TV_TUNER=Pinnacle PCTV 110i BDA Analog TV Tuner
FILTER_TV_AUDIO=Pinnacle PCTV 110i BDA Analog TV Audio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audioinput
PIN_CAPTURE_CAPTURE_OUT=Capture
PIN_WRITER_INPUT_IN=Input
Problem is that the recordings give an errormessage: cannot render the file
and in the GBPVRRecordingService.exe-native.log ther is an ERROR and there
is the ConexantRecorder mentioned ? this is too complicated, please help !!!
here is the log file:
18:59:00.375 INFO Log started
18:59:00.375 VERBOSE ConexantRecorder::StartRecording(1, 31, 184000000, 1)
18:59:00.375 VERBOSE target filename: U:\My TV\Socutera Zeister Zendingsgenootschap\Socutera Zeister Zendingsgenootschap_20061210_19001915.mpg
18:59:00.531 VERBOSE Loading filter names
18:59:00.531 VERBOSE Found names:
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog Xbar
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog Capture
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog TV Tuner
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog TV Audio
18:59:00.906 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
18:59:01.140 ERROR Failed to route audio crossbar
18:59:02.390 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audioinput'
18:59:02.875 VERBOSE put_Mode(AMTUNER_MODE_TV)
18:59:03.203 VERBOSE put_CountryCode(31)
18:59:03.312 VERBOSE put_TuningSpace(31)
18:59:03.312 VERBOSE put_InputType(0, 1)
18:59:03.312 VERBOSE put_ConnectInput(0)
18:59:03.312 VERBOSE put_Channel(184000000, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:59:03.312 VERBOSE SetFrequency(184000000)
18:59:03.312 VERBOSE get_VideoFrequency() returns 0
18:59:03.312 VERBOSE get_CountryCode() returns 31
18:59:03.656 VERBOSE About to query available formats
18:59:03.656 VERBOSE ConexantRecorder::SetConfigurationDefault()
18:59:03.656 VERBOSE getSetting(EnableTeleText)
18:59:03.781 VERBOSE getSetting(ListGraphFilters)
18:59:03.781 VERBOSE Graph contains the following filters:
18:59:03.796 VERBOSE - GB-PVR Writer
18:59:03.796 VERBOSE - Capture
18:59:03.796 VERBOSE - Pinnacle PCTV 110i BDA Analog Xbar
18:59:03.796 VERBOSE - TV Audio
18:59:03.796 VERBOSE - TV Tuner
18:59:03.796 VERBOSE getSetting(SaveGraphFiles)
18:59:04.046 VERBOSE ConexantRecorder::StartRecording() done
19:16:00.156 VERBOSE ConexantRecorder::StopRecording()
19:16:00.296 VERBOSE ConexantRecorder:one()
http://forums.nextpvr.com/showthread.php?t=21728
I have also a Pinnacle card, so I replaced the Hauppauge.
(uninstalled the software too...)
I only loaded the drivers, not the Pinnacle software.
The GB-PVR config tab: capture sources: capture card type has been
set to Pinnacle PCTV 110i Capture Device, I had added to the direct.ini
the following:
[Pinnacle PCTV 110i Capture Device]
INIT_MODE=DEFAULT
INIT_MSP=0
SUPPORTS_FM_RADIO=1
FILTER_CROSSBAR=Pinnacle PCTV 110i BDA Analog Xbar
FILTER_CAPTURE=Pinnacle PCTV 110i BDA Analog Capture
FILTER_TV_TUNER=Pinnacle PCTV 110i BDA Analog TV Tuner
FILTER_TV_AUDIO=Pinnacle PCTV 110i BDA Analog TV Audio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audioinput
PIN_CAPTURE_CAPTURE_OUT=Capture
PIN_WRITER_INPUT_IN=Input
Problem is that the recordings give an errormessage: cannot render the file
and in the GBPVRRecordingService.exe-native.log ther is an ERROR and there
is the ConexantRecorder mentioned ? this is too complicated, please help !!!
here is the log file:
18:59:00.375 INFO Log started
18:59:00.375 VERBOSE ConexantRecorder::StartRecording(1, 31, 184000000, 1)
18:59:00.375 VERBOSE target filename: U:\My TV\Socutera Zeister Zendingsgenootschap\Socutera Zeister Zendingsgenootschap_20061210_19001915.mpg
18:59:00.531 VERBOSE Loading filter names
18:59:00.531 VERBOSE Found names:
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog Xbar
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog Capture
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog TV Tuner
18:59:00.531 VERBOSE Pinnacle PCTV 110i BDA Analog TV Audio
18:59:00.906 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
18:59:01.140 ERROR Failed to route audio crossbar
18:59:02.390 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audioinput'
18:59:02.875 VERBOSE put_Mode(AMTUNER_MODE_TV)
18:59:03.203 VERBOSE put_CountryCode(31)
18:59:03.312 VERBOSE put_TuningSpace(31)
18:59:03.312 VERBOSE put_InputType(0, 1)
18:59:03.312 VERBOSE put_ConnectInput(0)
18:59:03.312 VERBOSE put_Channel(184000000, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:59:03.312 VERBOSE SetFrequency(184000000)
18:59:03.312 VERBOSE get_VideoFrequency() returns 0
18:59:03.312 VERBOSE get_CountryCode() returns 31
18:59:03.656 VERBOSE About to query available formats
18:59:03.656 VERBOSE ConexantRecorder::SetConfigurationDefault()
18:59:03.656 VERBOSE getSetting(EnableTeleText)
18:59:03.781 VERBOSE getSetting(ListGraphFilters)
18:59:03.781 VERBOSE Graph contains the following filters:
18:59:03.796 VERBOSE - GB-PVR Writer
18:59:03.796 VERBOSE - Capture
18:59:03.796 VERBOSE - Pinnacle PCTV 110i BDA Analog Xbar
18:59:03.796 VERBOSE - TV Audio
18:59:03.796 VERBOSE - TV Tuner
18:59:03.796 VERBOSE getSetting(SaveGraphFiles)
18:59:04.046 VERBOSE ConexantRecorder::StartRecording() done
19:16:00.156 VERBOSE ConexantRecorder::StopRecording()
19:16:00.296 VERBOSE ConexantRecorder:one()