Channel 2

Smoker · (This post was last modified: 2007-04-21, 01:38 PM by Smoker.)

Greetings Folks

Some of you already have seen my comments about my channel 2 problems.
I wanted to finally get this resolved and so it's own thread.

The background is that channel 2 for me works in every aspect (recorded and played elsewhere along with from gbpvr) except for live tv.

I've heard ideas of using graphedit and I have gotten it but am not sure how to use it to determine my problem.

So please help me finally resolve this problem.

::EDIT:: Forgot to add that the symptom is that the picture is jerky, studdering.

Smoker · 2007-04-21, 04:22 PM

it is just channel 2... I am not using a cable box. Yes at first I thought it might of been one of my pvr150's but since I can see a perfect picture in any other scenerio except for live tv it is very puzzling.

Smoker · 2007-04-21, 04:33 PM

haven't tried the tuning assistant but will play with it a bit now :p

***sub*** · 2007-04-21, 11:16 PM

What decoders do you have set?

pastro · 2007-04-21, 11:21 PM

Is it using the same tuner in live versus recording?

Smoker · (This post was last modified: 2007-04-22, 12:28 PM by Smoker.)

sub Wrote:What decoders do you have set?

I am using the nvideo

pastro Wrote:Is it using the same tuner in live versus recording?

I have tried with both by going into config and moving one of the tuners up or down.

::EDIT:: I was wrong, found out that in the config if I move a capture device up/down that it really doesn't do that. So I went in and de-selected channel 2 on one of the boards and now I can see channel 2 in live tv. I find it very odd though that a board can show all channels except one. Now I am off to see if changing the drivers might help.

Smoker · 2007-04-22, 02:58 PM

Does anyone know how to manually tune a channel ?

I am wondering if I could manually tune channel 2 on the one pvr150.

pastro · 2007-04-22, 03:58 PM

You did switch the coax between the two to make sure the problem stays with the flakey tuner, right?

Someone had posted the way to test one tuner is to deselect the channel from one tuner so GBPVR has no choice but to use the other.

Smoker · 2007-04-22, 07:14 PM

oh i've done alot of things but finally pulled the unsuspected card from the machine and connected the coax from the wall (before the splitter) and booted. Channel 2 still sucked.
So it is that card. RMA'ing asap.

***sub*** · 2007-04-22, 07:36 PM

tipstir Wrote:Sub what's about this FF-mpeg used for Live TV I was able to stablize my clipping with it then it started up again?

Sorry - I have no idea what you're trying to ask me.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	USA Cable Discovery Channel problems with Schedules Direct	ram4x4nut	0	3,813	2013-02-21, 05:08 AM Last Post: ram4x4nut
	Channel 4 HD new tuning string	Pob	0	2,490	2012-03-29, 08:59 PM Last Post: Pob
	Composite Channel not being tuned properly	seymoria	14	6,269	2012-01-24, 01:56 PM Last Post: seymoria
	Need help remapping Channel guide and actual channels	divinehammer	3	3,535	2012-01-20, 10:43 AM Last Post: kayleigh
	Composite channel configuration problem.	seymoria	6	4,248	2012-01-15, 10:15 PM Last Post: seymoria
	Live TV Locks Onto Different Channel	persim	1	2,158	2011-10-24, 06:33 PM Last Post: sub
	Recording fails but only on one channel (live viewing still works)	dshoup	5	3,217	2011-09-19, 01:15 AM Last Post: sub
	Channel 4 HD and sat ini	DanielP	40	11,296	2011-04-12, 10:42 PM Last Post: mvallevand
	How to get Sky Digital channel guide into GBPVR?	bobster	34	10,091	2011-04-01, 08:10 PM Last Post: bobster
	Setting for Numeric Channel Change Timeout?	smajor	6	2,510	2011-03-16, 07:21 PM Last Post: sub