Hauppauge USB2.0 Nova-T SE (stick)

NumberFive · 2007-06-19, 08:04 PM

Hi guys,

I'm having a problem getting my Nova-T SE Stick working in GBPVR. I have had it working on another computer under ProgDVB successfully, and on my HTPC using the copy of WinTV2000 it came with.

WinTV2000 describes it as:

Code:
Model 70009 Rev. C1B5

Serial #4027634097

Tuner Model/Formats: Microtune MT2060  //  ATSC

Tuner Audio: Mono

Video Formats: NTSC ( M ) PAL ( B G H I D K M N NCOMBO ) SECAM ( L L' )

Audio Outputs: None

External Inputs: 0

S-Video Inputs: 0

Teletext:  

Radio: None

Decoder: Reserved

IR: Yes

MAC Address: 00-0D-FE-10-D1-B1

EEprom Contents: 

84 09 00 04 20 77 00 40 b1 d1 10 f0 

73 05 00 00 

84 08 00 06 79 11 01 00 95 18 8d 

72 07 70 

73 09 00 5f 

73 0a 80 73 

72 0b 00 

72 0f 01 

72 10 01 

72 11 ff 

79 96

WinTV2000 Devices lists it as "PVR USB-2 > DVB-T"

GBPVR cannot see it. It shouts about "No known devices found" and won't work with the known Nova-T / HVR options.

I have had a HVR-900 work on this computer with GB-PVR.

Any thoughts much appreciated!

***sub*** · 2007-06-19, 08:08 PM

Can you run FilterCheck then attach the resulting FilterCheck.log: http://forums.gbpvr.com/showpost.php?p=1...ostcount=6

NumberFive · 2007-06-19, 11:14 PM

Hello,

Ran filtercheck, here's what it came up with:

Code:
11:01.634    INFO    Log started

11:01.634    INFO    Filter Check v1.0

11:01.634    INFO    

11:01.634    INFO    

11:01.634    INFO    Checking AM_KSCATEGORY_CAPTURE filters

11:01.694    INFO    found: Intel(r) Integrated Audio

11:01.714    INFO     - (input)  Input0

11:01.714    INFO     - (output) Recording Control

11:01.714    INFO     - (output) Output2

11:01.714    INFO     - (input)  Input3

11:01.714    INFO    

11:01.714    INFO    

11:01.714    INFO    

11:01.714    INFO    Checking AM_KSCATEGORY_ENCODER filters

11:01.714    INFO    

11:01.714    INFO    

11:01.714    INFO    Checking AM_KSCATEGORY_CROSSBAR filters

11:01.724    INFO    

11:01.724    INFO    

11:01.724    INFO    Checking AM_KSCATEGORY_TVTUNER filters

11:01.724    INFO    

11:01.724    INFO    

11:01.724    INFO    Checking AM_KSCATEGORY_TVAUDIO filters

11:01.724    INFO    

11:01.724    INFO    

11:01.724    INFO    Checking AM_KSCATEGORY_VBICODEC filters

11:01.744    INFO    found: NABTS/FEC VBI Codec

11:01.744    INFO     - (input)  VBI

11:01.744    INFO     - (output) NABTS

11:01.744    INFO     - (input)  HWNABTS

11:01.744    INFO    

11:01.744    INFO    found: CC Decoder

11:01.754    INFO     - (input)  VBI

11:01.754    INFO     - (output) CC

11:01.754    INFO     - (input)  HWCC

11:01.754    INFO    

11:01.754    INFO    found: WST Codec

11:01.754    INFO     - (input)  VBI

11:01.754    INFO     - (output) Teletext

11:01.754    INFO    

11:01.754    INFO    

11:01.754    INFO    

11:01.754    INFO    Checking KSCATEGORY_BDA_NETWORK_TUNER filters

11:01.774    INFO    found: WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0) 

11:01.774    INFO     - (input)  Input0

11:01.774    INFO     - (output) MPEG2 Transport

11:01.774    INFO    

11:01.774    INFO    

11:01.774    INFO    

11:01.774    INFO    Checking KSCATEGORY_BDA_RECEIVER_COMPONENT filters

11:01.784    INFO    found: BDA Slip De-Framer

11:01.794    INFO     - (input)  NABTS

11:01.794    INFO     - (output) IPv4

11:01.794    INFO    

11:01.794    INFO    found: BDA MPE Filter

11:01.794    INFO     - (input)  MPE

11:01.794    INFO     - (output) IPv4

11:01.794    INFO    

11:01.804    INFO    found: WinTV Nova-T Stick DVB-T Capture (Dev1 Path0)

11:01.804    INFO     - (input)  MPEG2 Transport

11:01.804    INFO     - (output) MPEG2 Transport

11:01.804    INFO

Many thanks for looking into this for me. I know a bit about the hardware inside these DVB-T systems, but the software is something of a dark art to me.

***sub*** · 2007-06-19, 11:29 PM

Try adding the following to bda.ini and it should be able to detect it.

[Hauppauge Nova-T-Stick type3]
TUNING_TYPE=DVB-T
RECEIVER_ONLY_MODE=1
FILTER_RECEIVER=WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0)
PIN_RECEIVER_IN=Input0
PIN_RECEIVER_OUT=MPEG2 Transport

NumberFive · 2007-06-20, 01:16 AM

Hi sub,

No joy there I'm afraid. I reconnected my HVR 900 and it found that first time.

I think I might have identified a problem. Under the "Safely Remove Hardware" dialog there is only a field for "Hauppauge Nova-T IR" which I would assume is the remote control receiver.

However, the device manager definately lists both the "Hauppauge Nova-T IR" and the "Hauppauge Nova-T Stick DVB-T Tuner Device" as separate items. Oddly unlike most hardware I cannot disable either of the entries.

Hmm, I'll crack this yet.

***sub*** · 2007-06-20, 01:22 AM

Can you try setting:

[Hauppauge Nova-T-Stick type3]
TUNING_TYPE=DVB-T
RECEIVER_ONLY_MODE=1
FILTER_RECEIVER="WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0) "
PIN_RECEIVER_IN=Input0
PIN_RECEIVER_OUT=MPEG2 Transport

***sub*** · 2007-06-20, 01:23 AM

The first step is getting it identified when setting up the capture source and you click the 'only show device detected in this machine' checkbox.

Next remember to set the device number correctly. This will be device #1.

nj2112 · 2007-06-20, 07:15 AM

sub Wrote:Can you try setting:

[Hauppauge Nova-T-Stick type3]
TUNING_TYPE=DVB-T
RECEIVER_ONLY_MODE=1
FILTER_RECEIVER="WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0) "
PIN_RECEIVER_IN=Input0
PIN_RECEIVER_OUT=MPEG2 Transport

I think this might be the post 3.4a drivers name change. Or this particular hardware version might only use the newer unified driver.

This works for me.

[Hauppauge Nova-T-Stick type3]
TUNING_TYPE=DVB-T
FILTER_TUNER="WinTV Nova-T Stick DVB-T Tuner (Dev1 Path0) "
FILTER_CAPTURE="WinTV Nova-T Stick DVB-T Capture (Dev1 Path0) "
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

I've just run filtercheck and get the same output as NumberFive for my Nova-T stick

NumberFive · 2007-06-20, 08:26 AM

Bingo!

Thanks guys, that has done the trick! nj's settings worked when I clicked only show devices in this machine.

NumberFive is alive!!!

Just wondering, in your opinion is it worth trying to get my HVR working in the same machine alongside the Nova-T?

Thanks again

nj2112 · 2007-06-20, 02:15 PM

NumberFive Wrote:Bingo!

Thanks guys, that has done the trick! nj's settings worked when I clicked only show devices in this machine.

NumberFive is alive!!!

Just wondering, in your opinion is it worth trying to get my HVR working in the same machine alongside the Nova-T?

Thanks again

I think it's worth a try.

When both are installed try this utility.

http://www.hauppauge.co.uk/board/showthread.php?t=12082

Run two instances of the prog and select the stick in one and the 900 in the other and set both running a full scan simultaneously (option 1).

If they both pick up transmissions then the devices should work together.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	What is BDA driver? (nova-t) ??	j196186	2	1,901	2024-03-07, 09:16 AM Last Post: itsmeagain
	GBPVR support for Hauppauge WinTV-HVR-1900 or Hauppauge HD-PVR (PAL)	lchiu7	23	18,056	2014-05-15, 12:59 AM Last Post: lchiu7
	Hauppauge 2250 MCE remote	Jeckler	22	20,417	2013-03-26, 04:26 PM Last Post: DonBrutto
	BDA drivers for NOVA-S ???	softfoot	6	4,885	2012-02-29, 02:23 AM Last Post: johnsonx42
	Composite Source using Hauppauge PVR500 gives sound but no video	DukeBrymin	1	2,977	2012-02-03, 02:41 AM Last Post: slowtech
	Nava-T Stick	Jaggy	5	3,203	2011-08-22, 02:08 AM Last Post: sub
	Will A Hauppauge Colossus work in 1.4.7?	hondophred	5	3,614	2011-06-29, 09:12 PM Last Post: sub
	Mygica USB HDTV stick A6808-W7	tuckster	2	3,803	2011-06-27, 01:50 PM Last Post: qam1600
	Recording problem with Hauppauge Nova-S USB2 ...	softfoot	4	3,285	2011-06-27, 02:06 AM Last Post: sub
	TV setup issues - PCTV nano stick 73e	steveomcd	33	19,484	2011-05-26, 04:24 PM Last Post: escape