very few OTA digital channels

agidius · 2008-01-18, 03:12 AM

I just got a 2nd HVR1600 to put on the roof antenna.
during the scan I only get 3 channels, when I know there should be more than a dozen.
my TV can pick up many more.

it found channel 26,39,and 55.
there should be more at 2,8,11,13,14,20,and 22
(I am leaving out the decimals)

what can I do??

***sub*** · 2008-01-18, 03:16 AM

Does the Hauppauge WinTV software find these channels?

agidius · 2008-01-18, 03:42 AM

I'm not sure what to do with winTV.
I told it to scan for channels, and it found nothing on either card.
the display just said "scanning for digital channels" for a very long time.
I cancelled the scan on day 4.

***sub*** · 2008-01-18, 03:53 AM

GB-PVR is usually pretty good at finding channels that are locked by the tuner, so without any other software turning up more channels I have to assume that this is the only signals your HVR1600 is locking onto with sufficiant signal strength.

If your TV's tuner is finding more channels, then it might have a higher quality tuner and be better coping with marginal signals. Did all those channels view smoothly on your tv?

agidius · 2008-01-18, 04:53 PM

they all look good on the TV.

this weekend I will see about getting a signal amplifier for the antenna, and see if it helps.

Deusxmachina · 2008-01-18, 08:50 PM

Using digital antenna signal, all my channels were coming in fine. I then moved my PC five feet to the right and two feet down, (from a desk over here to a floor over there), and I lost half the channels. The antenna is in the attic, so all that got moved was the PC and five feet of the 50' coaxial cable. I then adjusted the antenna and got them all back.

So, yeah, antenna signals can be picky sometimes.

You say it's your 2nd 1600. Is your first connected to satellite or cable or something?

agidius · 2008-01-18, 09:14 PM

1st connected to cable, yes

agidius · 2008-01-19, 12:31 AM

okay, this is odd.
I just did a rescan of the 1600 connected to cable, and it found nothing.
2 days ago it found over a hundred.

very odd.

no time now, but tommorrow I will rescan, and post logs.
is there a certian log file I should post??
or just the whole folder??

agidius · 2008-01-20, 11:45 PM

okay, I rebooted, followed by a scan that found nothing.
here are the logs.

http://www.agidius.com/other/gbpvrtest/012008.zip

***sub*** · 2008-01-20, 11:52 PM

Try the attached patch.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	no EPG for two channels	JimPletcher	5	4,852	2019-08-15, 09:53 PM Last Post: jobby99
	Locking in QAM Channels	highestbid	8	7,534	2014-03-12, 03:10 AM Last Post: highestbid
	Here comes Digital Cable ... what to do	divinehammer	26	12,016	2012-03-28, 10:31 PM Last Post: RumbleZ
	Need help remapping Channel guide and actual channels	divinehammer	3	3,829	2012-01-20, 10:43 AM Last Post: kayleigh
	Two Channels Without Video	skycyclepilot	5	3,575	2011-10-29, 07:49 PM Last Post: sub
	IR Blaster to Digital Box Issues	meccano	3	4,198	2011-08-13, 11:49 AM Last Post: meccano
	Retuning after digital switchover.	JohnD	4	3,574	2011-08-03, 07:39 PM Last Post: martint123
	No sound for French DVB-T H264 channels with E-AC3 tracks	jorionpi	7	4,761	2011-06-26, 01:25 AM Last Post: sub
	Problem with GB-PVR - Cannot Watch Channels and Administrator Problem	Greg Smith	10	4,574	2011-05-22, 05:09 PM Last Post: sub
	How to get Sky Digital channel guide into GBPVR?	bobster	34	11,624	2011-04-01, 08:10 PM Last Post: bobster