software encoder support for Hauppauge cards (experimental)

[sub]

i got no sound on hvr4000
sorry testing is over for today i had 20min window
i dont really need it just wanted to see if it would work

If you try it again, post the pvrx2.exe.log and pvrx2.exe-native.log and I'll take a look. I get sound ok here.

[pBS]

could this be why?
FILTER_CAPTURE_AUDIO=
or is it supposed to be blank?
just a thought..

[sub]

could this be why?
FILTER_CAPTURE_AUDIO=
or is it supposed to be blank?
just a thought..

It is supposed to be blank for the HVR-900.

In contrast, the HVR-3000/4000 requires a separate audio capture filter, so it sets this:

[Hauppuage HVR-4000]
ARCHITECTURE=88X
INIT_MODE=DEFAULT
INIT_MSP=0
SUPPORTS_FM_RADIO=1
BLACKBIRD=1
CONEXANT=0
FILTER_CROSSBAR=Hauppauge WinTV 88x Crossbar
FILTER_CAPTURE=Hauppauge WinTV 88x Video Capture
FILTER_TV_TUNER=Hauppauge WinTV 88x Tuner
FILTER_TV_AUDIO=Hauppauge WinTV 88x TvAudio
FILTER_CAPTURE_AUDIO=Hauppauge WinTV 88x Audio Capture
FILTER_ENCODER=MainConcept (MCE) MPEG Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_PREVIEW_AUDIO_OUT=Video Virtual Out
PIN_CAPTURE_CAPTURE_OUT=Capture
PIN_CAPTURE_I2S_OUT=I2S
PIN_CAPTURE_656_OUT=656
PIN_ENCODER_I2S_IN=Audio Input
PIN_ENCODER_656_IN=Input
PIN_ENCODER_OUT=Output
PIN_WRITER_INPUT_IN=Input

[sub]

i got no sound on hvr4000
sorry testing is over for today i had 20min window
i dont really need it just wanted to see if it would work

Can you check your direct.ini has an HVR-4000 section that matches the above?

[stustunz]

here is a cut from my direct.ini

[Hauppuage HVR-4000]
ARCHITECTURE=88X
INIT_MODE=DEFAULT
INIT_MSP=0
SUPPORTS_FM_RADIO=1
BLACKBIRD=1
CONEXANT=0
FILTER_CROSSBAR=Hauppauge WinTV 88x Crossbar
FILTER_CAPTURE=Hauppauge WinTV 88x Video Capture
FILTER_TV_TUNER=Hauppauge WinTV 88x Tuner
FILTER_TV_AUDIO=Hauppauge WinTV 88x TvAudio
FILTER_CAPTURE_AUDIO=Hauppauge WinTV 88x Audio Capture
;FILTER_ENCODER=Hauppauge WinTV MPEG2 Muxer
FILTER_ENCODER=CyberLink MPEG Muxer
FILTER_ENCODER_VIDEO=MainConcept (Hauppauge) MPEG Video Encoder
FILTER_ENCODER_AUDIO=MainConcept (Hauppauge) MPEG Audio Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_PREVIEW_AUDIO_OUT=Video Virtual Out
PIN_CAPTURE_CAPTURE_OUT=Capture
PIN_CAPTURE_I2S_OUT=I2S
PIN_CAPTURE_656_OUT=656
PIN_ENCODER_I2S_IN=Audio Input
PIN_ENCODER_656_IN=Input
;PIN_ENCODER_OUT=MPEG2 PS
PIN_ENCODER_OUT=Output
PIN_WRITER_INPUT_IN=Input

[sub]

Thats slightly different. Try overwritting the section in your file with the section I supplied above. If it still doesnt work, post the logs and I'll take a look.

[Immorak82]

Hey Sub,

I see you have the HVR-900 working.

I tried it also, i have replaced the native dll file and i updated the direct.ini file. and i configured my tvcard in GB-PVR and added a test channel.

But when i try to start LiveTv, the screen goes black for a few seconds and after i end up in the main menu again.

I added my logs, from just after the crash.

Thanx in advance.

[Immorak82]

but i heared you are very busy

[sub]

Did you install SoftMCE?

[Immorak82]

This is wat i said in the other Topic:

'Well i just have the drivers and wintv, and i looked for SoftMCE, but only found some old stuff, you have a downloadlink?

Do i have to configure SoftMCE after installing?'