H264 SD channel problems

[sub]

Can you post the GBPVRRecordingService.exe-native-1.log that was missing from that set of files? It seems to be the one that contains the recording.

[danIrl]

Here it is...

[sub]

Can you try creating a c:\temp directory, then add this registry key, then try again, then zip and attach your c:\temp\flow.txt file, then delete the registry key.

HKEY_LOCAL_MACHINE\Software\Devnz\LogTSFlow=1 (DWORD)

[danIrl]

okay. try again rescanning for channels or recording a program?

[sub]

recording a zero byte file

[danIrl]

here it is

[sub]

According to that log, you're trying to record program 1011, which isnt available in the frequency you're tuned to.

23:59:05.828 Recording service: 1101 (0x44d)

The programs that are available on this frequency include:

23:59:14.203 PAT maps service_id 0000 to PMT PID 16 (0x0010)
23:59:14.203 PAT maps service_id 0001 to PMT PID 1901 (0x076d)
23:59:14.203 PAT maps service_id 0002 to PMT PID 1902 (0x076e)
23:59:14.203 PAT maps service_id 0003 to PMT PID 1903 (0x076f)
23:59:14.203 PAT maps service_id 0004 to PMT PID 1904 (0x0770)
23:59:14.203 PAT maps service_id 0005 to PMT PID 1921 (0x0781)
23:59:14.203 PAT maps service_id 0006 to PMT PID 1922 (0x0782)
23:59:14.203 PAT maps service_id 0007 to PMT PID 1923 (0x0783)
23:59:14.203 PAT maps service_id 0008 to PMT PID 1924 (0x0784)

So, this looks like the tuning information for your channels are incorrect. This is most likely because either the broadcaster has changed the service numbers (possible if broadcaster is only trialling these services, not live system), or the scanning went wrong, or you've manually entered the channel info and got it wrong.

[danIrl]

okay. I will double check... but I did not enter any manual tuning info.

Also how would this explain that the TsMux works with v1.2.9 and not 1.2.13?

If I get a proper ts file with fullTsMux... could that still mean my tuning info is incorrect?

[sub]

TSMux in previous releases was an entirely different thing, and worked a very different way.

If I get a proper ts file with fullTsMux... could that still mean my tuning info is incorrect?

This works because it pays no attention to the program number and instead writes all the data that is received to the recording. Its only a probably when you try to record one specific channel (program number 1011) and that channel isnt present in the data received.

[danIrl]

okay will that makes sense.

Well I thought a rescan would fix it but it didnt.

I then removed the capture source and added it again.
Any now the TsMux is working fine, (Thanks for your help.) but I still cannot get the InternalTsReader to work ;-)

Any particular test I should do?