2008-11-06, 10:16 AM
Hello all, I have been trying to get gbpvr working for the last 2 week, everything seems to be ok, thank to all the documentation available, I am very happy overall, and I should take the oportunity to thank everyone who has contributed in any way for keeping the forum full of valuable information.
I have a problem with channel searching, I can not get some particular channels in hispasat. witch I find quite easy when searching manually with powercinema.
the satelite details are:
<transponder frequency="12012000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
and
<transponder frequency="12052000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
also
<transponder frequency="12092000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
Package details can be found at hxxp://www.lyngsat.com/packages/meo.html
As I said I have tried pretty much everithing, and did a lot of reading, I apologise in advance in case this issue as been discussed and there is a answer somewhere in the forum or wiki pages, there is a lot of thing I still need to understand, having said that, I really tried very hard with several diferent setting, normally the way I see it, should be enought to include in the DVB-S folder, in hispasat file the S2 details, witch I did, and did not do the job.
52=12012,H,30000,34,S2
57=12052,H,30000,34,S2
65=12092,H,30000,34,S2
I found every other channel available in the satelite, inclusive the AC3 from spanish HD.
It seems is not scanning modulation 8PSK.
As I said it scans ok when searching manually with powercinema from cyberlink.
I tested the hardware, the card shows as being a Hauppauge HVR-4000 (DVB-S/S2) device, having used the filtergrath, is shows exatly the same details as for my card, so it should be ok.
My last attempt was the xmltv, thinking maby if I could get one, maby I could change some details manualy, but no luck, could not get it working, and could not found one allready made.
I think this is all the info about my problem, should any logs, or any extra info be necessary, please let me know.
I hope there is a solution.
Just one other thing, maby I am doing something wrong, but on the GUI, I can not access settings, it tries to go there, but comes back to main menu, not alowing to do anything on settings, from what I could see, maby it would not solve my problem, because it seems is no satelite or channels configuration there.
Thank you all for any possible help.
I have a problem with channel searching, I can not get some particular channels in hispasat. witch I find quite easy when searching manually with powercinema.
the satelite details are:
<transponder frequency="12012000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
and
<transponder frequency="12052000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
also
<transponder frequency="12092000" symbol_rate="3000000" polarization="1" fec_inner="3" broadcast_type="DVB-S2" modulation="8PSK" pilot="0" rolloff="35" />
Package details can be found at hxxp://www.lyngsat.com/packages/meo.html
As I said I have tried pretty much everithing, and did a lot of reading, I apologise in advance in case this issue as been discussed and there is a answer somewhere in the forum or wiki pages, there is a lot of thing I still need to understand, having said that, I really tried very hard with several diferent setting, normally the way I see it, should be enought to include in the DVB-S folder, in hispasat file the S2 details, witch I did, and did not do the job.
52=12012,H,30000,34,S2
57=12052,H,30000,34,S2
65=12092,H,30000,34,S2
I found every other channel available in the satelite, inclusive the AC3 from spanish HD.
It seems is not scanning modulation 8PSK.
As I said it scans ok when searching manually with powercinema from cyberlink.
I tested the hardware, the card shows as being a Hauppauge HVR-4000 (DVB-S/S2) device, having used the filtergrath, is shows exatly the same details as for my card, so it should be ok.
My last attempt was the xmltv, thinking maby if I could get one, maby I could change some details manualy, but no luck, could not get it working, and could not found one allready made.
I think this is all the info about my problem, should any logs, or any extra info be necessary, please let me know.
I hope there is a solution.
Just one other thing, maby I am doing something wrong, but on the GUI, I can not access settings, it tries to go there, but comes back to main menu, not alowing to do anything on settings, from what I could see, maby it would not solve my problem, because it seems is no satelite or channels configuration there.
Thank you all for any possible help.