2009-06-10, 09:01 PM
I have used the generally excellent NMT installer to revive the GBPVR connection with my computer after I installed a hard drive into the NMT (A PCH-A110). After weeding out firwall problems, much is working fine now. But I am having a problem with the Mayhem3 screen (and in fact, also any screen that I select) extending beyond the width of my poor old 4:3 tube screen. I did select the 480 screen resolution option with the installer. After installation, I have also made sure that the GBPVR playback config still calls out a 4x3 shape (and it does). I have cleared any cache (i think) by pressing Filemode on the NMT's remote. I have tried all four of the NMT's screen settings (Fit to Screen, Fullsize, Crop, Actual Size) (NTSC setting with no framerate synching) with no change.
I use the composite output of the NMT which runs to my Home Theater's Preamp/Processor video input. From there, the composite video output of the Preamp/Processor runs to the composite input of my old Sony 4:3 tube television.
I have attached the most recent logs
I use the composite output of the NMT which runs to my Home Theater's Preamp/Processor video input. From there, the composite video output of the Preamp/Processor runs to the composite input of my old Sony 4:3 tube television.
I have attached the most recent logs