2009-12-17, 08:49 PM
I'm having problems with the Irish DVB-T channels which used to work fine (fine when the signal is being transmitted! It's still technically a test here so not 100% reliable) but recently I've not been able to get them to tune in. The scan finds all the channels on two mux's (C61 seems to have the best signal). When I bring up the "map digital channels" screen in the config.exe, it shows RTE1 in the little window (but the tuning info must be some old config) as when I then do a rescan and click on one of the found channels the preview screen stops working. In pvrx2 when I select one of these channels the external amp shows some PCM sound briefly then it stops and the screen stays blank. It's odd that the scans seem to work but the results are unusable. I've read the "digital switch over" problem thread about DTT issues in Wales and no idea if this is related. It used to work find and clearly the channels are still watchable as sometimes I do get them in the preview window from some old config (which I'm guessing is the RTE1 tuning request I can see in the config.exe-native.log?). Logs and resulting scan.cache file attached. Any ideas??