Help!
Suddenly I can no longer record at all. As of last night, none of the scheduled recordings produced a file. Currently, neither scheduled recordings or manual recordings generate files. The directories to hold the recordings get created OK ... just nothing gets written. Live TV in GBPVR shows up OK, as does WinTV. The WinTV scheduler still works OK (I ran a short test) and produces a viewable file.
Up til now, things have been working fine. I have 2 PVR-150's installed in an XP box with tons of free disk space. This configuration had been running successfully for a few weeks now, recording from both cards simultaneously with no trouble.
I have tried re-installing, uninstalling & then deleting the original program directories prior to a clean re-install and there is no improvement.
Following the clean re-install GBPVR can see both tuners OK - I can have two windows open on Live TV viewing 2 different programs with no problem... but can't get a recording to write.
I have also removed and done a fresh re-installation of all the pvr-150 drivers and applications. I switched the GBPVR record-to directory to a different drive. Nothing has helped!
I really need some help getting this going again.
This is a portion of the gbpvrrecordingservice.exe-native.log for an attempt:
21:50:00.125 VERBOSE ConexantRecorder::StartRecording(1, 1, 2, 0)
21:50:00.140 VERBOSE Capture Device is based on BlackBird architecture
21:50:00.140 VERBOSE Capture Device is using Conexant (derived) drivers
21:50:00.140 VERBOSE Loading filter names
21:50:00.140 VERBOSE Found names:
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II Capture
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
21:50:00.156 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
21:50:00.500 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
21:50:00.500 VERBOSE Looking for encoder filter
21:50:00.500 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
21:50:00.515 VERBOSE ConnectPins: '656' to '656'
21:50:00.703 VERBOSE ConnectPins failed!
21:50:00.718 VERBOSE put_Mode(AMTUNER_MODE_TV)
21:50:00.718 VERBOSE put_CountryCode(1)
21:50:00.781 VERBOSE put_TuningSpace(1)
21:50:00.781 VERBOSE put_InputType(0, 0)
21:50:00.781 VERBOSE put_ConnectInput(0)
21:50:00.781 VERBOSE put_Channel(2, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
21:50:00.953 VERBOSE get_VideoFrequency() returns 55250000
21:50:00.953 VERBOSE get_CountryCode() returns 1
21:50:00.968 VERBOSE About to query available formats
21:50:00.984 VERBOSE Recorder::SetConfigurationECP()
21:50:01.000 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26032 Rev C199
Serial No: 7935834
Tuner: 99
Decoder: 28
AudioIC: 35
IR
Input Map: C= 0x000f, S= 0x0003
21:50:01.218 VERBOSE FindFilterByName failed to locate filter: GB-PVR WST SRT Analog
21:50:01.218 ERROR failed to start Conexant Graph
21:50:01.265 VERBOSE ERROR_DEVICE_NOT_CONNECTED
21:50:01.281 VERBOSE getSetting(ListGraphFilters)
21:50:01.281 VERBOSE Graph contains the following filters:
21:50:01.281 VERBOSE - GB-PVR Writer
21:50:01.281 VERBOSE - Capture
21:50:01.281 VERBOSE - Encoder
21:50:01.281 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
21:50:01.281 VERBOSE - TV Audio
21:50:01.281 VERBOSE - TV Tuner
21:50:01.281 VERBOSE getSetting(SaveGraphFiles)
21:50:01.281 VERBOSE ConexantRecorder::StartRecording() done
(I didn't trim this off, this is where it stopped ...)
------------------------
The gbpvrrecordingservice.exe.log had the following for the same period:
5/17/2005 9:48:45 PM.156 VERBOSE [445] received request to reload schedule
5/17/2005 9:48:45 PM.390 VERBOSE [35] processing request to reload schedule
5/17/2005 9:48:45 PM.890 VERBOSE [35] RecordingFactory.loadSchedule()
5/17/2005 9:48:45 PM.890 VERBOSE [35] - loading: 2 WMAR status:0 start: 5/17/2005 9:50 PM
5/17/2005 9:48:45 PM.890 VERBOSE [35] checking pending recordings
5/17/2005 9:48:45 PM.890 VERBOSE [35] - checking 2 WMAR
5/17/2005 9:48:45 PM.890 VERBOSE [35] pending: 2 WMAR
5/17/2005 9:50:00 PM.062 VERBOSE [35] Changing to channel (GBPVR.Backend.Common.NullTunerController): 2
5/17/2005 9:50:00 PM.093 VERBOSE [35] Requesting IRecordingSource to start recording: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg
5/17/2005 9:50:00 PM.125 VERBOSE [35] DirectRecordingSource about to start recording oid:1 channel:2
5/17/2005 9:50:01 PM.281 VERBOSE [35] recording started
5/17/2005 9:50:01 PM.281 VERBOSE [35] Programme is now recording
5/17/2005 9:50:01 PM.281 VERBOSE [35] RecordingFactor.save()
5/17/2005 9:50:01 PM.296 VERBOSE [35] Save(): Updated existing scheduled recording
5/17/2005 9:51:35 PM.828 VERBOSE [41] RecordingFactory.loadSchedule()
5/17/2005 9:51:35 PM.843 VERBOSE [41] - loading: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg status:1 start: 5/17/2005 9:50 PM
5/17/2005 9:59:55 PM.843 VERBOSE [41] RecordingFactory.loadSchedule()
5/17/2005 9:59:55 PM.843 VERBOSE [41] - loading: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg status:1 start: 5/17/2005 9:50 PM
5/17/2005 10:00:29 PM.156 VERBOSE [35] Recording has passed endtime+padding. Stopping.
5/17/2005 10:00:29 PM.156 VERBOSE [35] Stopping recording oid:1
5/17/2005 10:00:29 PM.250 VERBOSE [35] Adding G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg to commercial detection queue
5/17/2005 10:00:29 PM.250 VERBOSE [35] RecordingStatus is now RecordingStatus.RECORDING_COMPETED
5/17/2005 10:00:29 PM.250 VERBOSE [35] RecordingFactor.save()
5/17/2005 10:00:29 PM.250 VERBOSE [35] Save(): Updated existing scheduled recording
5/17/2005 10:00:29 PM.250 INFO [698] Post Processing thread starting...
5/17/2005 10:00:29 PM.296 VERBOSE [35] RecordingFactory.loadSchedule()
5/17/2005 10:00:29 PM.296 VERBOSE [35] - loading: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg status:2 start: 5/17/2005 9:50 PM
5/17/2005 10:00:29 PM.296 VERBOSE [35] checking pending recordings
Suddenly I can no longer record at all. As of last night, none of the scheduled recordings produced a file. Currently, neither scheduled recordings or manual recordings generate files. The directories to hold the recordings get created OK ... just nothing gets written. Live TV in GBPVR shows up OK, as does WinTV. The WinTV scheduler still works OK (I ran a short test) and produces a viewable file.
Up til now, things have been working fine. I have 2 PVR-150's installed in an XP box with tons of free disk space. This configuration had been running successfully for a few weeks now, recording from both cards simultaneously with no trouble.
I have tried re-installing, uninstalling & then deleting the original program directories prior to a clean re-install and there is no improvement.
Following the clean re-install GBPVR can see both tuners OK - I can have two windows open on Live TV viewing 2 different programs with no problem... but can't get a recording to write.
I have also removed and done a fresh re-installation of all the pvr-150 drivers and applications. I switched the GBPVR record-to directory to a different drive. Nothing has helped!
I really need some help getting this going again.
This is a portion of the gbpvrrecordingservice.exe-native.log for an attempt:
21:50:00.125 VERBOSE ConexantRecorder::StartRecording(1, 1, 2, 0)
21:50:00.140 VERBOSE Capture Device is based on BlackBird architecture
21:50:00.140 VERBOSE Capture Device is using Conexant (derived) drivers
21:50:00.140 VERBOSE Loading filter names
21:50:00.140 VERBOSE Found names:
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II Capture
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
21:50:00.140 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
21:50:00.156 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
21:50:00.500 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
21:50:00.500 VERBOSE Looking for encoder filter
21:50:00.500 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
21:50:00.515 VERBOSE ConnectPins: '656' to '656'
21:50:00.703 VERBOSE ConnectPins failed!
21:50:00.718 VERBOSE put_Mode(AMTUNER_MODE_TV)
21:50:00.718 VERBOSE put_CountryCode(1)
21:50:00.781 VERBOSE put_TuningSpace(1)
21:50:00.781 VERBOSE put_InputType(0, 0)
21:50:00.781 VERBOSE put_ConnectInput(0)
21:50:00.781 VERBOSE put_Channel(2, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
21:50:00.953 VERBOSE get_VideoFrequency() returns 55250000
21:50:00.953 VERBOSE get_CountryCode() returns 1
21:50:00.968 VERBOSE About to query available formats
21:50:00.984 VERBOSE Recorder::SetConfigurationECP()
21:50:01.000 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 26032 Rev C199
Serial No: 7935834
Tuner: 99
Decoder: 28
AudioIC: 35
IR
Input Map: C= 0x000f, S= 0x0003
21:50:01.218 VERBOSE FindFilterByName failed to locate filter: GB-PVR WST SRT Analog
21:50:01.218 ERROR failed to start Conexant Graph
21:50:01.265 VERBOSE ERROR_DEVICE_NOT_CONNECTED
21:50:01.281 VERBOSE getSetting(ListGraphFilters)
21:50:01.281 VERBOSE Graph contains the following filters:
21:50:01.281 VERBOSE - GB-PVR Writer
21:50:01.281 VERBOSE - Capture
21:50:01.281 VERBOSE - Encoder
21:50:01.281 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
21:50:01.281 VERBOSE - TV Audio
21:50:01.281 VERBOSE - TV Tuner
21:50:01.281 VERBOSE getSetting(SaveGraphFiles)
21:50:01.281 VERBOSE ConexantRecorder::StartRecording() done
(I didn't trim this off, this is where it stopped ...)
------------------------
The gbpvrrecordingservice.exe.log had the following for the same period:
5/17/2005 9:48:45 PM.156 VERBOSE [445] received request to reload schedule
5/17/2005 9:48:45 PM.390 VERBOSE [35] processing request to reload schedule
5/17/2005 9:48:45 PM.890 VERBOSE [35] RecordingFactory.loadSchedule()
5/17/2005 9:48:45 PM.890 VERBOSE [35] - loading: 2 WMAR status:0 start: 5/17/2005 9:50 PM
5/17/2005 9:48:45 PM.890 VERBOSE [35] checking pending recordings
5/17/2005 9:48:45 PM.890 VERBOSE [35] - checking 2 WMAR
5/17/2005 9:48:45 PM.890 VERBOSE [35] pending: 2 WMAR
5/17/2005 9:50:00 PM.062 VERBOSE [35] Changing to channel (GBPVR.Backend.Common.NullTunerController): 2
5/17/2005 9:50:00 PM.093 VERBOSE [35] Requesting IRecordingSource to start recording: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg
5/17/2005 9:50:00 PM.125 VERBOSE [35] DirectRecordingSource about to start recording oid:1 channel:2
5/17/2005 9:50:01 PM.281 VERBOSE [35] recording started
5/17/2005 9:50:01 PM.281 VERBOSE [35] Programme is now recording
5/17/2005 9:50:01 PM.281 VERBOSE [35] RecordingFactor.save()
5/17/2005 9:50:01 PM.296 VERBOSE [35] Save(): Updated existing scheduled recording
5/17/2005 9:51:35 PM.828 VERBOSE [41] RecordingFactory.loadSchedule()
5/17/2005 9:51:35 PM.843 VERBOSE [41] - loading: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg status:1 start: 5/17/2005 9:50 PM
5/17/2005 9:59:55 PM.843 VERBOSE [41] RecordingFactory.loadSchedule()
5/17/2005 9:59:55 PM.843 VERBOSE [41] - loading: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg status:1 start: 5/17/2005 9:50 PM
5/17/2005 10:00:29 PM.156 VERBOSE [35] Recording has passed endtime+padding. Stopping.
5/17/2005 10:00:29 PM.156 VERBOSE [35] Stopping recording oid:1
5/17/2005 10:00:29 PM.250 VERBOSE [35] Adding G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg to commercial detection queue
5/17/2005 10:00:29 PM.250 VERBOSE [35] RecordingStatus is now RecordingStatus.RECORDING_COMPETED
5/17/2005 10:00:29 PM.250 VERBOSE [35] RecordingFactor.save()
5/17/2005 10:00:29 PM.250 VERBOSE [35] Save(): Updated existing scheduled recording
5/17/2005 10:00:29 PM.250 INFO [698] Post Processing thread starting...
5/17/2005 10:00:29 PM.296 VERBOSE [35] RecordingFactory.loadSchedule()
5/17/2005 10:00:29 PM.296 VERBOSE [35] - loading: G:\gbpvr\Manual Recordings\2 WMAR_20050517215000.mpg status:2 start: 5/17/2005 9:50 PM
5/17/2005 10:00:29 PM.296 VERBOSE [35] checking pending recordings
