Can´t get NPVR - NEWCS - ACAMD to work

[andcar]

I am relatively new to cardsharing. I am using NEWCS, ACAMD and NPVR, shouldn´t that work?

I think I have got the NEWCS to work all right,


[SIZE="1"]This is NewCS 1.65 - the New CardServer by the Butter-team..
Compiled on Jan 19 2009 at 17:54:08
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 21:59:21 ] [ Box detect ] Windows Vista Build 7600
[ 21:59:21 ] [ Config ] Option <blockc0> for device 0 (Phoenix Interface) not present, defaulting to
NO
[ 21:59:21 ] [ Config ] COM5 ECM priority: round
[ 21:59:21 ] [ EMM Cache ] Initialising dynamic Cache
[ 21:59:21 ] [ ECM Cache ] Initialising dynamic Cache
[ 21:59:21 ] [ Loader ] Starting Telnet on port 1001
[ 21:59:21 ] [ Loader ] Reader type 2 on node COM5
[ 21:59:21 ] [ Phoenix ] Opening device COM5
[ 21:59:21 ] [ Phoenix ] Setting parity to ODD on node COM5
[ 21:59:21 ] [ Phoenix ] Setting 1 Stop bit on node COM5
[ 21:59:21 ] [ Phoenix ] Setting baud to 9600
[ 21:59:23 ] [ ATR ] T=0 1etu=8.68us Guardtime:12etu WWT:115200etu
[ 21:59:23 ] [ ATR ] Historical bytes: [C2] z B [02] h [90] [00]
[ 21:59:23 ] [ Loader ] Init Viaccess card
[ 21:59:23 ] [ Phoenix ] Setting parity to ODD on node COM5
[ 21:59:23 ] [ Phoenix ] Setting 1 Stop bit on node COM5
[ 21:59:23 ] [ Phoenix ] Setting baud to 9600
[ 21:59:23 ] [ KeymaN ] Adding key BDD7BFD2 type 0 on Provider 000000 for caid 0500 ID=0
[ 21:59:23 ] [ KeymaN ] Adding key BDD7BFD2 type 1 on Provider FFF510 for caid 0500 ID=0
[ 21:59:23 ] [ KeymaN ] Adding key BDD7BFD2 type 1 on Provider 040D00 for caid 0500 ID=1
[ 21:59:23 ] [ KeymaN ] Adding key BDD7BFD2 type 1 on Provider 040D10 for caid 0500 ID=2
[ 21:59:24 ] [ KeymaN ] Adding key BDD7BFD2 type 1 on Provider 040D20 for caid 0500 ID=3
[ 21:59:24 ] [ KeymaN ] Adding key BDD7BFD2 type 1 on Provider 040D30 for caid 0500 ID=4
[ 21:59:24 ] [ Loader ] Card 0500 on port COM5 ready
[ 21:59:24 ] [ Loader ] Starting Newcamd Server on port 16000
[ 21:59:24 ] [ Newcamd ] Newcamd thread Server started on port 16000
newcamd: main loop[/SIZE]

The newcs.xml
[SIZE="1"]- <newCSconfig>
- <readers name="Phoenix">
- <device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>COM5</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>Yes</blocksa>
<blockua>yes</blockua>
<blockga>Yes</blockga>
- <!-- <boxkey>0000000000</boxkey>
-->
- <!-- <rsa>0000000000</rsa>
-->
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>16000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
</readers>
- <cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
- <debug>
<password>NewCSpwd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
- <radegastserver>
<enabled>no</enabled>
<port>16000</port>
- <allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
- <newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>010203040506070809101112</deskey>
- <user>
<name>user</name>
<password>pass</password>
<au>on</au>
<spider>No</spider>
</user>
</newcamdserver>
</newCSconfig>[/SIZE]

I have putted the ACMD files in c:\users\shared\npvr\mdplugins\"tuner"\

My cardclient.ini file has the row

[SIZE="1"]newcamd:127.0.0.1:16000:1/0500/ffff:user: pass:010203040506070809101112[/SIZE]

I can watch all fre channels but no encrypted
What am I doing wrong? Any suggestions?

[sub]

Did you enable multidec in your device settings?

Do you see the tray icon?

[tmrt]

[SIZE="1"]newcamd:127.0.0.1:16000:1/0500/ffff:user: pass:010203040506070809101112[/SIZE]

I would try to remove space between : and pass.

Enable newcs web server so you could observe what is going on at http://localhost:8080:
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>passwd</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>

[Reddwarf]

I think the "mask" value in Cardclient.conf (not .ini) should be "ff00", and remove all spaces.

[andcar]

Did you enable multidec in your device settings?

Yes

Do you see the tray icon?

No, should I?

I would try to remove space between : and pass.

I places the space in the forum posting to get rid of the smiley

Enable newcs web server so you could observe what is going on at http://localhost:8080:

I have now added the server lines before the user section but when I write http://localhost:8080: in eplorer the site is not existing.

I think the "mask" value in Cardclient.conf (not .ini) should be "ff00", and remove all spaces.

Thanks for the suggestion but no difference.

Is there no way to se the "status" of the multidec? Should there be a tray icon? When is that showing?

[sub]

Do you have FFDecsa.dll installed?

[Reddwarf]

If you use NewCSGUI.exe you should get a tray icon where you can right-click and select Show to see what is going on.

[tmrt]

I have now added the server lines before the user section but when I write http://localhost:8080: in eplorer the site is not existing.

It should be one level higher, before <newcamdserver> for example.

[andcar]

Do you have FFDecsa.dll installed?

I would not call it installed but I have placed that file in the program files\npvr directory. Is that enough?

[sub]

Yeah, from memory one of the directories it'll look for it in is 'c:\program files\npvr'. Are you on another drive?