2005-06-07, 06:17 AM
Hi,
I'm running a Hauppauge WinTV PVR500MCE with GBPVR. After fighting with MythTV on Linux for a while, the swap to GBPVR was relatively painless
Except that I'm unable to timeshift or record TV; LiveTV works fine, but when clicking on the pause button on the Live TV screen, I get the 'Switching to timeshift mode, Please wait' message and then I'm bounced back to the main menu. I'm assuming this isn't the intended behaviour! Likewise, when I try to record a show, either using quickrecord, or scheduled recording, I get no errors, the app believes its recording, but no files are created in the recordings directory.
I've dug around the log files a bit, this is the contents of the gbpvrrecordingservice.exe-native.log file:
18:01:19.921 INFO Log started
18:01:19.921 VERBOSE ConexantRecorder::StartRecording(2, 64, 7, 1)
18:01:19.921 VERBOSE Capture Device is based on BlackBird architecture
18:01:19.921 VERBOSE Capture Device is using Conexant (derived) drivers
18:01:19.921 VERBOSE Loading filter names
18:01:19.921 VERBOSE Found names:
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II Capture
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
18:01:19.953 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
18:01:20.046 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
18:01:20.046 VERBOSE Looking for encoder filter
18:01:20.046 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
18:01:20.062 VERBOSE ConnectPins: '656' to '656'
18:01:21.125 VERBOSE ConnectPins failed!
18:01:21.156 VERBOSE put_Mode(AMTUNER_MODE_TV)
18:01:21.156 VERBOSE put_CountryCode(64)
18:01:21.156 VERBOSE put_TuningSpace(64)
18:01:21.156 VERBOSE put_InputType(0, 1)
18:01:21.156 VERBOSE put_ConnectInput(0)
18:01:21.156 VERBOSE put_Channel(7, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:01:21.328 VERBOSE get_VideoFrequency() returns 196250000
18:01:21.328 VERBOSE get_CountryCode() returns 64
18:01:21.328 VERBOSE About to query available formats
18:01:21.328 VERBOSE ConexantRecorder::SetConfigurationECP()
18:01:21.328 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 23559 Rev D591
Serial No: 7787580
Tuner[1]: Model 91 (Philips FQ1216AME_MK4)
Decoder: 30
AudioIC: 37
Input Map: C= 0x000f, S= 0x0003
18:01:21.359 VERBOSE FindFilterByName failed to locate filter: GB-PVR WST SRT Analog
18:01:21.359 ERROR failed to start Conexant Graph
18:01:21.406 VERBOSE ERROR_DEVICE_NOT_CONNECTED
18:01:21.406 VERBOSE getSetting(ListGraphFilters)
18:01:21.421 VERBOSE Graph contains the following filters:
18:01:21.421 VERBOSE - GB-PVR Writer
18:01:21.421 VERBOSE - Capture
18:01:21.421 VERBOSE - Encoder
18:01:21.421 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
18:01:21.421 VERBOSE - TV Audio
18:01:21.421 VERBOSE - TV Tuner
18:01:21.421 VERBOSE getSetting(SaveGraphFiles)
18:01:21.421 VERBOSE ConexantRecorder::StartRecording() done
18:01:21.984 VERBOSE ConexantRecorder::StopRecording()
Comparing with the gbpvr.exe-native.log file, the following lines that appear when recording that don't appear when watching live are:
18:01:20.046 VERBOSE Looking for encoder filter
18:01:20.046 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
18:01:20.062 VERBOSE ConnectPins: '656' to '656'
18:01:21.125 VERBOSE ConnectPins failed!
Which I'm guessing is the point when the mpeg encoder is connected into the DirectShow filter graph...and further on:
18:01:21.359 VERBOSE FindFilterByName failed to locate filter: GB-PVR WST SRT Analog
18:01:21.359 ERROR failed to start Conexant Graph
18:01:21.406 VERBOSE ERROR_DEVICE_NOT_CONNECTED
All suggestions, help, assistance etc kindly appreciated.
Cheers,
Kieron.
I'm running a Hauppauge WinTV PVR500MCE with GBPVR. After fighting with MythTV on Linux for a while, the swap to GBPVR was relatively painless
Except that I'm unable to timeshift or record TV; LiveTV works fine, but when clicking on the pause button on the Live TV screen, I get the 'Switching to timeshift mode, Please wait' message and then I'm bounced back to the main menu. I'm assuming this isn't the intended behaviour! Likewise, when I try to record a show, either using quickrecord, or scheduled recording, I get no errors, the app believes its recording, but no files are created in the recordings directory.
I've dug around the log files a bit, this is the contents of the gbpvrrecordingservice.exe-native.log file:
18:01:19.921 INFO Log started
18:01:19.921 VERBOSE ConexantRecorder::StartRecording(2, 64, 7, 1)
18:01:19.921 VERBOSE Capture Device is based on BlackBird architecture
18:01:19.921 VERBOSE Capture Device is using Conexant (derived) drivers
18:01:19.921 VERBOSE Loading filter names
18:01:19.921 VERBOSE Found names:
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II Crossbar
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II Capture
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II TvTuner
18:01:19.921 VERBOSE Hauppauge WinTV PVR PCI II TvAudio
18:01:19.953 VERBOSE ConnectPins: 'Analog Audio' to 'TVAudio In'
18:01:20.046 VERBOSE ConnectPins: 'Audio Decoder Out' to 'Analog Audio In'
18:01:20.046 VERBOSE Looking for encoder filter
18:01:20.046 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
18:01:20.062 VERBOSE ConnectPins: '656' to '656'
18:01:21.125 VERBOSE ConnectPins failed!
18:01:21.156 VERBOSE put_Mode(AMTUNER_MODE_TV)
18:01:21.156 VERBOSE put_CountryCode(64)
18:01:21.156 VERBOSE put_TuningSpace(64)
18:01:21.156 VERBOSE put_InputType(0, 1)
18:01:21.156 VERBOSE put_ConnectInput(0)
18:01:21.156 VERBOSE put_Channel(7, AMTUNER_SUBCHAN_DEFAULT, AMTUNER_SUBCHAN_DEFAULT)
18:01:21.328 VERBOSE get_VideoFrequency() returns 196250000
18:01:21.328 VERBOSE get_CountryCode() returns 64
18:01:21.328 VERBOSE About to query available formats
18:01:21.328 VERBOSE ConexantRecorder::SetConfigurationECP()
18:01:21.328 INFO Firmware Version 2.5.32
Audio Firmware Version <<can't read now>>
Model 23559 Rev D591
Serial No: 7787580
Tuner[1]: Model 91 (Philips FQ1216AME_MK4)
Decoder: 30
AudioIC: 37
Input Map: C= 0x000f, S= 0x0003
18:01:21.359 VERBOSE FindFilterByName failed to locate filter: GB-PVR WST SRT Analog
18:01:21.359 ERROR failed to start Conexant Graph
18:01:21.406 VERBOSE ERROR_DEVICE_NOT_CONNECTED
18:01:21.406 VERBOSE getSetting(ListGraphFilters)
18:01:21.421 VERBOSE Graph contains the following filters:
18:01:21.421 VERBOSE - GB-PVR Writer
18:01:21.421 VERBOSE - Capture
18:01:21.421 VERBOSE - Encoder
18:01:21.421 VERBOSE - Hauppauge WinTV PVR PCI II Crossbar
18:01:21.421 VERBOSE - TV Audio
18:01:21.421 VERBOSE - TV Tuner
18:01:21.421 VERBOSE getSetting(SaveGraphFiles)
18:01:21.421 VERBOSE ConexantRecorder::StartRecording() done
18:01:21.984 VERBOSE ConexantRecorder::StopRecording()
Comparing with the gbpvr.exe-native.log file, the following lines that appear when recording that don't appear when watching live are:
18:01:20.046 VERBOSE Looking for encoder filter
18:01:20.046 VERBOSE - Hauppauge WinTV PVR PCI II Encoder
18:01:20.062 VERBOSE ConnectPins: '656' to '656'
18:01:21.125 VERBOSE ConnectPins failed!
Which I'm guessing is the point when the mpeg encoder is connected into the DirectShow filter graph...and further on:
18:01:21.359 VERBOSE FindFilterByName failed to locate filter: GB-PVR WST SRT Analog
18:01:21.359 ERROR failed to start Conexant Graph
18:01:21.406 VERBOSE ERROR_DEVICE_NOT_CONNECTED
All suggestions, help, assistance etc kindly appreciated.
Cheers,
Kieron.