Transcoding

[vintdiesel]

I transcode to mp4 and one channel to mkv with a bitrate of 2000kb/s using ffmpeg at midnight to any shows that have not been watched (and deleted) that night. This results in file size being reduced by a factor of 5. I don't bother transcoding the 6pm NEWS as I keep only 2 recordings and is refreshed daily.

I perform different actions according to which channel I have recorded as audio streams are mapped differently across the channels and I only want AC3. My postprocessing.bat file handles the logic.

I bought an unlocked core i5 for the very reason of multitasking, transcoding and my upgraded CPU cooler is working wonders in keeping the machine quiet with minimum fan speeds and CPU core temps <60C @ 3.4Ghz.

[OTAjunkie]

@vintdiesel,

can you post some of your ffmpeg scripts and your PP.bat?

I'm always looking for something new that's sensible.
My Mencoder scripts take about 65% time as the shows run time to process and I can't help but think with a quad core I could do better.
I think each core trundles along at about 40%.
On the other hand, with my present setup I can have four PP jobs running and still be recording(s) and watching live with PIP up and it's still smooth.
My CPU stays <50C and I only added a chassis fan to the stock CPU fan and heatsink cooling setup.

[vintdiesel]

Yep, here is a copy of my PP.bat, the ffmpeg scripts are all contained within it. The basis of the script was developed from examples that some clever people had posted on this site, then I added what I needed to make it work for me. It took me a while as I am not that great with batch files:

Code:

rem -------------------------- rem PostProcessingBat rem D.Little rem Version 8 rem dated 18/03/2012 rem -------------------------- title PostProcessingBat echo . >>processing.log echo %date%,%time% - %3 - PostProcessing.bat invoked on %1 recorded channel %2 on tuner %4 >>processing.log echo %3 > %3.ppr rem only start processing between midnight and 10am :loop set hrs=%TIME:~0,2% rem the ~0,2 picks up the first 2 characters of the Time variable (position and length) if %hrs% geq 10 ( rem echo ...%hrs% hours waiting 10 minutes sleep 600 goto loop ) rem need to add a pause to avoid race conditions by taking last two digits of the OID and using them as a delay in seconds set delay=%3 set delay=%delay:~-2% echo %date%,%time% - %3 - sleeping %delay% seconds to avoid simultaneous execution >>processing.log sleep %delay% rem check how many ffmpegs are running; if 1 or more are running wait 1 minute and check again rem the third parameter passed in npvr 1.5.36 and later is a unique recording oid number, so it makes a good filename to store the temporary count :check1 tasklist | find /c "ffmpeg" > %3.ppr set /p count= <%3.ppr if %count% geq 1 ( echo %date%,%time% - %3 - %count% ffmpegs running now, waiting 1 minute >>processing.log sleep 60 goto check1 ) rem continuing now Rem any channel number > 10 skip post processing requirement if %2% gtr 10 goto skip Rem if the NEWS is recorded skip postprocessing requirement set filename=%1% set prefix="%filename:~18,15%" if %prefix%=="ONE News At 6pm" goto skip echo %date%,%time% - %3 - transcoding invoked on %1 >>processing.log Rem list of channels to run transcoding on if %2% equ 1 goto profile3 if %2% equ 2 goto profile3 if %2% equ 3 goto profile3 if %2% equ 4 goto profile3 if %2% equ 5 goto profile5 if %2% equ 6 goto profile3 if %2% equ 7 goto profile7 if %2% equ 8 goto profile3 if %2% equ 9 goto profile9 if %2% equ 10 goto profile10 goto eof REM Encode to mp4 changing file extension :profile1 "C:\Program Files (x86)\ffmpeg\bin\ffmpeg.exe" -y -i %1 -b:v 2000k -map 0:0 -map 0:3 -c:a copy -ar 48000 -async 48000 "%~dpn1".mp4 goto deletets :profile3 "C:\Program Files (x86)\ffmpeg\bin\ffmpeg.exe" -y -i %1 -b:v 2000k -deinterlace -map 0:0 -map 0:1 -c:a libvo_aacenc -ar 48000 -async 48000 "%~dpn1".mp4 goto deletets :profile5 "C:\Program Files (x86)\ffmpeg\bin\ffmpeg.exe" -y -i %1 -b:v 2000k -deinterlace -map 0:0 -map 0:2 -c:a libvo_aacenc -ar 48000 -async 48000 "%~dpn1".mp4 goto deletets :profile7 "C:\Program Files (x86)\ffmpeg\bin\ffmpeg.exe" -y -i %1 -b:v 2000k -deinterlace -map 0:0 -map 0:1 -c:a libvo_aacenc -ar 48000 -async 48000 "%~dpn1".mp4 goto deletets :profile9 "C:\Program Files (x86)\ffmpeg\bin\ffmpeg.exe" -y -i %1 -b:v 2000k -c:a libvo_aacenc -ar 48000 -async 48000 "%~dpn1".mkv goto deletets :profile10 "C:\Program Files (x86)\ffmpeg\bin\ffmpeg.exe" -y -i %1 -b:v 2000k -deinterlace -map 0:1 -map 0:2 -c:a libvo_aacenc -ar 48000 -async 48000 "%~dpn1".mp4 goto deletets :deletets REM Delete original TS del %1 echo %date%,%time% - %3 - deleted %1 recorded from channel %2 >>processing.log goto check2 :skip echo %date%,%time% - %3 - channel doesn't require transcoding >>processing.log goto check2 rem check how many ffmpegs are running; if 1 or more are running wait 1 minute and check again rem the third parameter passed in npvr 1.5.36 and later is a unique recording oid number, so it makes a good filename to store the temporary count :check2 rem check for other postprocesses in 2 minutes else put PC into Standby sleep 120 tasklist | find /c "ffmpeg" > %3.ppr set /p count= <%3.ppr echo %date%,%time% - %3 - %count% ffmpegs running >>processing.log if %count% geq 1 ( echo %date%,%time% - %3 - %count% ffmpegs running, end without standby >>processing.log del %3.ppr goto finish ) tasklist | find /c "sleep" > %3.ppr set /p count= <%3.ppr echo %date%,%time% - %3 - %count% sleeps running >>processing.log if %count% geq 1 ( echo %date%,%time% - %3 - %count% sleeps running, end without standby >>processing.log del %3.ppr goto finish ) del %3.ppr if exist *.ppr goto finish rem continuing now :standby rem put PC into standby del %3.ppr echo %date%,%time% - %3 - PC Standby called >>processing.log echo -------------------------------------- >>processing.log rundll32 powrprof.dll,SetSuspendState 0,1,0 :finish rem finish without putting PC into standby :eof

[boy914]

Similar to the NextPVREncoder posted a few weeks back, I wrote my own little .NET app called by PostProcessing.bat to run comskip, Handbrake to m4v (different settings depending on the show), add chapters to the recording using the comskip output (I also don't trust comskip to edit the recordings out, so I just put chapters in the recording and manually skip as I watch), rename the recording using the SxxExx convention (using the Sickbeard API to query the show data), and then finally copy the file to my Sickbeard watch folder. In the end, I have a much smaller file with chapter markers at commercials, all organized with the rest of my television shows managed by Sickbeard. I use XBMC to watch the shows on a Win7 HTPC in the living room and a RPi in the bedroom.

(Yes, I'm a little proud of it, although I wrote it in a way that probably doesn't lend itself to sharing without some refactoring.)

-Rick

[vgossain]

Similar to the NextPVREncoder posted a few weeks back, I wrote my own little .NET app called by PostProcessing.bat to run comskip, Handbrake to m4v (different settings depending on the show), add chapters to the recording using the comskip output (I also don't trust comskip to edit the recordings out, so I just put chapters in the recording and manually skip as I watch), rename the recording using the SxxExx convention (using the Sickbeard API to query the show data), and then finally copy the file to my Sickbeard watch folder. In the end, I have a much smaller file with chapter markers at commercials, all organized with the rest of my television shows managed by Sickbeard. I use XBMC to watch the shows on a Win7 HTPC in the living room and a RPi in the bedroom.

(Yes, I'm a little proud of it, although I wrote it in a way that probably doesn't lend itself to sharing without some refactoring.)

-Rick

Rick, any chance you can post it, even if it isn't very simple to explain what is going on? I'm looking to do that exact same thing and would love to start from somewhere instead of from scratch.