Unable to start device: Device failed to start

[driver140771]

Hello i am new here with NextPVR and have a problem with my tuner cards and channel-scan.
When i start the channel scan on the device i get this error:
Unable to start device: Device failed to start

My tuner cards are Digitl Devices DVB-S2 Cards (See the attached picture)

And the log:

2013-11-23 09:09:44.863 [INFO][3] current online version: 3.1.1
2013-11-23 09:09:44.863 [INFO][3] last notified version: 3.1.1
2013-11-23 09:09:47.396 [DEBUG][1] Scanning digital devices
2013-11-23 09:09:47.424 [DEBUG][1] About to detect digital tuners
2013-11-23 09:09:47.429 [DEBUG][1] - 'Digital Devices DVB-S/S2 Tuner 2'
2013-11-23 09:09:47.429 [DEBUG][1] - 'Digital Devices DVB-S/S2 Tuner 4'
2013-11-23 09:09:47.429 [DEBUG][1] - 'Digital Devices DVB-S/S2 Tuner 1'
2013-11-23 09:09:47.430 [DEBUG][1] - 'Digital Devices DVB-S/S2 Tuner 3'
2013-11-23 09:09:47.437 [DEBUG][1] About to check standards supported by 'Digital Devices DVB-S/S2 Tuner 1'
2013-11-23 09:09:47.437 [DEBUG][1] Found IBDA_Topology

2013-11-23 09:09:47.437 [DEBUG][1] - KSNODE_BDA_RF_TUNER

2013-11-23 09:09:47.437 [DEBUG][1] - KSNODE_BDA_QPSK_DEMODULATOR

2013-11-23 09:09:47.437 [DEBUG][1] Done
2013-11-23 09:09:47.440 [DEBUG][1] About to check standards supported by 'Digital Devices DVB-S/S2 Tuner 2'
2013-11-23 09:09:47.440 [DEBUG][1] Found IBDA_Topology

2013-11-23 09:09:47.440 [DEBUG][1] - KSNODE_BDA_RF_TUNER

2013-11-23 09:09:47.440 [DEBUG][1] - KSNODE_BDA_QPSK_DEMODULATOR

2013-11-23 09:09:47.440 [DEBUG][1] Done
2013-11-23 09:09:47.443 [DEBUG][1] About to check standards supported by 'Digital Devices DVB-S/S2 Tuner 3'
2013-11-23 09:09:47.443 [DEBUG][1] Found IBDA_Topology

2013-11-23 09:09:47.443 [DEBUG][1] - KSNODE_BDA_RF_TUNER

2013-11-23 09:09:47.443 [DEBUG][1] - KSNODE_BDA_QPSK_DEMODULATOR

2013-11-23 09:09:47.443 [DEBUG][1] Done
2013-11-23 09:09:47.445 [DEBUG][1] About to check standards supported by 'Digital Devices DVB-S/S2 Tuner 4'
2013-11-23 09:09:47.445 [DEBUG][1] Found IBDA_Topology

2013-11-23 09:09:47.445 [DEBUG][1] - KSNODE_BDA_RF_TUNER

2013-11-23 09:09:47.445 [DEBUG][1] - KSNODE_BDA_QPSK_DEMODULATOR

2013-11-23 09:09:47.446 [DEBUG][1] Done
2013-11-23 09:09:47.446 [DEBUG][1] Scanning HDPVR/Colossus devices
2013-11-23 09:09:47.451 [DEBUG][1] About to check for HDPVR/Colossus/Siena tuners.
2013-11-23 09:09:47.452 [DEBUG][1] Scanning analog devices
2013-11-23 09:09:47.456 [DEBUG][1] About to check for analog tuners
2013-11-23 09:09:47.467 [DEBUG][1] FindFilterByName failed to locate filter: MainConcept (HCW) MPEG Multiplexer-Plus
2013-11-23 09:09:47.467 [DEBUG][1] MainConcept mux not present. Disabling analog support.
2013-11-23 09:09:47.467 [DEBUG][1] Scanning HDHR devices
2013-11-23 09:09:47.469 [DEBUG][1] Scanning IPTV devices
2013-11-23 09:09:47.470 [DEBUG][1] Scanning plugin devices
2013-11-23 09:09:54.963 [DEBUG][1] 11836,H,27500,0
2013-11-23 09:09:54.968 [INFO][1] DigitalRecorder.StartStream(c:\nowhere\scan.ts)
2013-11-23 09:09:54.968 [INFO][1] Creating BDA graph
2013-11-23 09:09:54.998 [DEBUG][1] CreateTuneRequestDVBS@1
2013-11-23 09:09:55.004 [DEBUG][1] CreateTuneRequestDVBS@2
2013-11-23 09:09:55.004 [DEBUG][1] CreateTuneRequestDVBS@3
2013-11-23 09:09:55.004 [DEBUG][1] CreateTuneRequestDVBS@4
2013-11-23 09:09:55.005 [DEBUG][1] CreateTuneRequestDVBS@ found tuning space
2013-11-23 09:09:55.005 [DEBUG][1] CreateTuneRequest successful
2013-11-23 09:09:55.005 [DEBUG][1] CreateTuneRequestDVBS@exit
2013-11-23 09:09:55.005 [DEBUG][1] About to submit tuning request
2013-11-23 09:09:55.005 [DEBUG][1] tuning request submitted
2013-11-23 09:09:55.007 [DEBUG][1] Calling LockChannel()
2013-11-23 09:09:55.007 [DEBUG][1] locked=0, present=0, strength=0, quality=0 (took 15ms to check)
2013-11-23 09:09:55.013 [DEBUG][1] Using tuner Digital Devices DVB-S/S2 Tuner 1 (1)
2013-11-23 09:09:55.017 [DEBUG][1] About to auto detect capture filter...
2013-11-23 09:09:55.019 [DEBUG][1] No BDA capture filter for this device
2013-11-23 09:09:55.023 [DEBUG][1] Activating time machine
2013-11-23 09:09:55.023 [DEBUG][1] Time machine activated...
2013-11-23 09:09:55.038 [DEBUG][1] ConnectPins failed: hr = 80040217
2013-11-23 09:09:55.038 [ERROR][1] Failed to connect capture -> ts monitor
2013-11-23 09:09:55.044 [DEBUG][1] ConnectPins failed: hr = 80040209
2013-11-23 09:09:55.060 [DEBUG][1] EIT collection started
2013-11-23 09:09:55.063 [DEBUG][1] Graph filter list:
2013-11-23 09:09:55.063 [DEBUG][1] - MPEG-2 Sections and Tables
2013-11-23 09:09:55.063 [DEBUG][1] - BDA MPEG2 Transport Information Filter
2013-11-23 09:09:55.063 [DEBUG][1] - MPEG-2 Demultiplexer
2013-11-23 09:09:55.063 [DEBUG][1] - NPVR TS Mon
2013-11-23 09:09:55.063 [DEBUG][1] - Tuner
2013-11-23 09:09:55.063 [DEBUG][1] - Network Provider
2013-11-23 09:09:55.063 [INFO][1] About to start BDA graph
2013-11-23 09:09:55.063 [DEBUG][1] Starting graph...
2013-11-23 09:09:55.065 [DEBUG][1] Failed to start device: 0x80004005
2013-11-23 09:09:55.069 [DEBUG][1] Removing filter MPEG-2 Sections and Tables
2013-11-23 09:09:55.069 [DEBUG][1] Removing filter BDA MPEG2 Transport Information Filter
2013-11-23 09:09:55.069 [DEBUG][1] Removing filter MPEG-2 Demultiplexer
2013-11-23 09:09:55.069 [DEBUG][1] Removing filter NPVR TS Mon
2013-11-23 09:09:55.070 [DEBUG][1] Removing filter Tuner
2013-11-23 09:09:55.070 [DEBUG][1] Removing filter Network Provider
2013-11-23 09:09:57.931 [INFO][1] DigitalRecorder.StopAllStreams()

What is the problem?

[dljones8053]

Not sure if this will help or not but when I deal with a multi-tuner device I disable all but one of them get it set up and do my EPG mapping and once I get every thing working then I enable the others one at a time so it will copy my settings over to the other tuners as I enable them

This process make trouble shooting a lot easier since I only have to focus on one tuner.

dj

[johnsonx42]

I moved this thread... it was posted in the GB-PVR support forum, but the user is running NPVR 3.1.1.

[Zeb]

Hello driver140771. Have you installed the current patches from the sticky thread? Patch 1 in particular might help. If that doesn't solve the problem, go to NPVR program files, run FilterCheck, send the log it creates to a zipped folder and attach that to your next post. What Digital Devices product do you have?

[Reddwarf]

Did you run the Digital Devices config utility after installing the card? After it is run manually the first time it is supposed to run automatically every time your computer reboots.