sat > ip tuner

[sub]

That's great. It sounds like your device needs those fe, mtype and fec settings. Other sat>ip devices don't require these. I'll add them for the next build.

In addition, it sounds like your device doesn't support "pids=all". That's ok, NextPVR doesn't ask for pids=all. It was just useful for trying to view in VLC etc when you don't know the specific pids.

[sub]

Can you let me know if that fe=1 was required?

ie, after restarting the device, is this enough to get some data?

Code:

SATIPTest.exe "rtsp://192.168.0.19:554/?src=1&freq=10714&pol=h&msys=dvbs&mtype=qpsk&sr=22000&fec=56&pids=0"

[gromgsxr]

Can you let me know if that fe=1 was required?

ie, after restarting the device, is this enough to get some data?

Code:

SATIPTest.exe "rtsp://192.168.0.19:554/?src=1&freq=10714&pol=h&msys=dvbs&mtype=qpsk&sr=22000&fec=56&pids=0"

ok stopped tvheadend, rebooted my sat > ip then ran the satiptest program that's what i got

[sub]

I'm hopeful the most recent build should now get your SAT>IP device working with NextPVR. Let me know how you get on.

[gromgsxr]

I'm hopeful the most recent build should now get your SAT>IP device working with NextPVR. Let me know how you get on.

nope still not quite there scan runs detected a bunch of channels and at the end only one is there to save

[sub]

nope still not quite there scan runs detected a bunch of channels and at the end only one is there to save

Sorry...progress at least. Getting closer. I'll take a look at the logs.

[sub]

I guessing it's to do with not finding channel numbers, so they all end up as the same channel number, and you only get shown one of them.

[gromgsxr]

i still have the same behaviour

[sub]

i still have the same behaviour

I'm away the next week and half, but happy to look at this again if you bump it when I'm back.