sat > ip tuner

[gromgsxr]

my tuners are detected but the scan does not find anything. attached is a image the first tuner it being used by tvheadend tuners 3&4 by npvr and it appears its not tuning it as there is no frequency shown

[sub]

Those logs don't seem to show a scan attempt. Can you use the 'zip my logs' button immediately after the scan?

[mvallevand]

Funny It logs like it scanned, I was impressed with the new logs, I've got lots to learn about v5

2019-06-18 18:33:37.799 [DEBUG][17] method=setting.scan.start
....
2019-06-18 18:35:13.993 [DEBUG][6] method=setting.scan.stop

I was sure the error was related to

2019-06-18 18:33:38.915 [ERROR][21] Error in RSTP data thread: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond


Martin

[sub]

Hmm - strangely that doesn't seem to be the zip file I look at a few minutes ago (which only had four small-ish files). This one has eight. Maybe a case of too many zip file sessions sitting open and I'd looked at the wrong one

I'll take another look. Sorry for any confusion.

[sub]

I dug out an older SAT>IP device I had, and it also isn't finding any channels. Hopefully for the same reason yours wasn't finding channels. I'll get that working, and post a new build in a couple of hours.

I've also added a couple more logging messages, based on info I couldn't find in your logs, to make it easier next I have to work through this for a user.

[sub]

the arm32v7 & windows versions both fail to tune any channels

I assume you're using the updated version posted yesterday?

Can you please post logs showing a new scan? I've added some additional logging, which will hopefully help me understand what is happening.

[gromgsxr]

logs were taken on a version of npvr windows i downloaded about a 2 hours ago. same time as when i tried both docker versions

[sub]

If you open this network URL in VLC, do you see video?

Code:

rtsp://192.168.0.19:554/?src=1&freq=10714&sr=22000&pol=h&msys=dvbs&pids=all

[sub]

Or this one?

Code:

rtsp://192.168.0.19:554/?src=1&freq=10714&sr=22000&pol=h&fec=56&msys=dvbs&pids=all

[gromgsxr]

yeah i get video in vlc from both