2020-03-30, 06:29 AM
I wonder if the FilterCheck.exe from v4 would help?
Martin
Martin
NextPVR Forums
Public
NextPVR Support
Windows
Problems with DVBC tuners
Problems with DVBC tuners
|
2020-03-30, 12:48 PM
Hi Martin,
I've run it, however it does not enumerate the pins - attached is the log from the run. 
FilterCheck.zip (Size: 711 bytes / Downloads: 2)
Looking into GraphEdit more, it will enumerate the pins, however can't save into a text file - just screenshots. At the moment I am not sure how I can help any more to resolve this.
- Dane
Cheap Medion Minitower, but it's quiet enough - Windows 11x64 - Digital Devices DVB-C PCIe (1x Cine quad and 1x Cine dual) - LG C2 with Jellyfin front end, NPVR back end - 30TB storage, ~7,500 films
2020-03-31, 08:18 AM
Hi Sub,
Many thanks - attached are the results - they look *strange* as the pinning for the outputs are all zero (is this normal?) - however the pin names are correct. I've also run GraphStudio and added a screenshot of what it is showing for the pin results.
FilterCheck.zip (Size: 903 bytes / Downloads: 2)
- Dane
Cheap Medion Minitower, but it's quiet enough - Windows 11x64 - Digital Devices DVB-C PCIe (1x Cine quad and 1x Cine dual) - LG C2 with Jellyfin front end, NPVR back end - 30TB storage, ~7,500 films
2020-03-31, 08:32 PM
Unfortunately your tuner filters don't seem to have output pins by default. They may only show up after the connected to something up stream. Without these pins, FilterCheck can't list the output pin mediums, which are used for detecting which tuner filters go with which capture filters.
I'm not really sure what to do about your problem just yet.
2020-03-31, 08:35 PM
2020-04-01, 08:16 AM
Hi Sub,
swapping out the DLL fixed everything - tuners are all working now. I'm running some scheduling and recording tests over the next couple of days. The old DLL was from 29.12.2019.. Attached are the logs if you want to take a look at how it went.
logs-20200401-1014.zip (Size: 1.06 MB / Downloads: 0)
Regards, Dane
- Dane
Cheap Medion Minitower, but it's quiet enough - Windows 11x64 - Digital Devices DVB-C PCIe (1x Cine quad and 1x Cine dual) - LG C2 with Jellyfin front end, NPVR back end - 30TB storage, ~7,500 films
2021-07-14, 01:31 PM
Hi!
I also have two Digital Devices Cards (Cine CT V6 and Max M4) with 4 Cable Tuners each. All 8 Tuners are shown in the configuration but when I try to access more than 4 of them I am beeing blocked from doing so. I stumbled accross this thread but I assume that the changes to unmanaged.dll that fixed the issue are already implemented in the newest version of NextPVR I am running. So what could be the solution in my case? Regards, Matthias Machine: Windows 10x64 Cards: - Digital Devices Cine CT V6 (4 Tuners) - Digital Devices Max M4 (4 Tuners) Provider: German Cable (Vodafone) |
|
|
