New install - Web browser failing with Streaming Failed (transcoder exited)

[NickH]

Sorry but it seems I am only randomly getting emails of thread updates. There is a capture of Dave here and attached are my logs.

[edit]
Just adding, this does not seem to be browser specific. I also see it using Chrome on my Android tablet when browsing to the PC with the receiver and NextPVR installation.
[/edit]

[Graham]

Can you also post a set of logs showing an attempt to watch one of these problem BBC channels?

Curiousier and curiousier ... This morning, Live TV was working fine on BBC One ... This afternoon, Live TV on BBC One gives me ... Streaming failed (transcoder exited) ...

Logs ... https://www.dropbox.com/s/gi7ojcemwhvclu...6.zip?dl=0

Buffer file ... https://www.dropbox.com/s/84wma18s2tkn8i...1.zip?dl=0

TS capture ... https://www.dropbox.com/s/ca3d483us7x2vl...re.ts?dl=0

Edit:  And at 17.45 Live TV on BBC One was working okay ... the logs for this are attached.

[sub]

If one of you guys is able to capture 1 minute full transport stream, from this frequency carrying Dave, I'll try it here with my signal generator.

You can use the eval version of TSCapture to do this, from https://tscapture.com

My .TS was for BBC One and not Dave ... I'll do a TS capture tomorrow.
.

Or, maybe, today ...

https://www.dropbox.com/s/ca3d483us7x2vl...re.ts?dl=0
.

I've just been looking at this now, and can see the same problem happening using this transport stream with my signal generator. Strangely it's fine if I use the Intel or D3D11VA hardware acceleration.

I'll play around with it a bit.

[sub]

Do you have <LanguagePreference1> set to something other than default in your config.xml?

[Graham]

I've just been looking at this now, and can see the same problem happening using this transport stream with my signal generator. Strangely it's fine if I use the Intel or D3D11VA hardware acceleration.

I'll play around with it a bit.

In case you didn't see ... I've updated my earlier post because the problem had gone half an hour after I posted ... logs are attached to the earlier post.
.

[sub]

Just in case it returns though, do you have <LanguagePreference1> set to something?

[Graham]

Just in case it returns though, do you have  <LanguagePreference1>  set to something?

<LanguagePreference1> = eng
<LanguagePreference2> = default

I haven't ever changed these ... config-master-dont-edit in Program Files\NextPVR has the same values.
.

[sub]

Ok.

I think that setting it to 'default' will fix the issue with it occasionally not playing. I'll need to do some more experimenting though, because I want it to work with it set to 'eng' (or other languages too).

[NickH]

I can confirm that setting it to "default" fixes Dave for me.

[sub]

Cheers for the confirmation