Channel Icon Displaying as "Broken"

[mvallevand]

Thanks now sub can definitely see all the png files with spaces for a fix in a future release.

Code:

2021-01-16 10:57:49.706    [DEBUG][12]    Downloading https://schedulesdirect-api20141201.s3.us-east-1.amazonaws.com/assets/stationLogos/s112329_dark_360w_270h.png to C:\Users\Public\NPVR-data\media\channels\DABL   .png
2021-01-16 10:57:49.713    [DEBUG][12]    Downloading https://schedulesdirect-api20141201.s3.us-east-1.amazonaws.com/assets/stationLogos/s40722_dark_360w_270h.png to C:\Users\Public\NPVR-data\media\channels\MeTV   .png
2021-01-16 10:57:49.717    [DEBUG][12]    Downloading https://schedulesdirect-api20141201.s3.us-east-1.amazonaws.com/assets/stationLogos/s92201_dark_360w_270h.png to C:\Users\Public\NPVR-data\media\channels\Bounce .png
2021-01-16 10:57:49.718    [DEBUG][12]    Downloading https://schedulesdirect-api20141201.s3.us-east-1.amazonaws.com/assets/stationLogos/s90202_dark_360w_270h.png to C:\Users\Public\NPVR-data\media\channels\ESCAPE .png
2021-01-16 10:57:49.722    [DEBUG][12]    Downloading https://schedulesdirect-api20141201.s3.us-east-1.amazonaws.com/assets/stationLogos/s81301_dark_360w_270h.png to C:\Users\Public\NPVR-data\media\channels\BUZZR  .png
2021-01-16 10:57:49.723    [DEBUG][12]    Downloading https://schedulesdirect-api20141201.s3.us-east-1.amazonaws.com/assets/stationLogos/s97850_dark_360w_270h.png to C:\Users\Public\NPVR-data\media\channels\Heroes .png
2021-01-16 10:57:49.760    [DEBUG][12]    Downloading https://schedulesdirect-api20141201.s3.us-east-1.amazonaws.com/assets/stationLogos/s90164_dark_360w_270h.png to C:\Users\Public\NPVR-data\media\channels\GRIT   .png

[sub]

Where are you channels from? An ATSC tuner? HDHR tuner? Somewhere else?

[FrogFan]

Where are you channels from? An ATSC tuner? HDHR tuner? Somewhere else?

These are ATSC over-the-air channels available in the Dallas/Ft. Worth Texas area.  I'm receiving them with either the Hauppauge WinTV-HVR-2250 or the Hauppauge WinTV-quadHD tuner (I have both cards installed on my server.)

I hope I've answered your question.

Thanks very much again.

[sub]

What you get a chance, can you do a scan, then post your logs? You don't need to save at the end of the scan.

[FrogFan]

What you get a chance, can you do a scan, then post your logs? You don't need to save at the end of the scan.

Just to be clear, are you asking me to go to Settings>Devices and then click "ReScan for Devices"?  Or do you want me to pick a device and "Scan channels"?  If you want me to pick a device, would you like me to pick any one in particular? 

Apologies for this question, but do I risk fouling anything up in my setup (future recordings, etc.) by doing either of these?  (I'm assuming no if I don't save anything but I have to ask anyway.  I've been known to mess things up when I tinker.)

Thanks again for your help.

[sub]

Pick a device then scan for channels

As long as you don’t save at the end, it won’t break any existing channels. You can also backup your npvr.db3 to be extra sure.

[FrogFan]

Pick a device then scan for channels

As long as you don’t save at the end, it won’t break any existing channels. You can also backup your npvr.db3 to be extra sure.

Done.  Logs are attached.

When I navigate to Devices on the web interface, I see 17 devices listed.  Six are labelled "ATSC", four are labelled "Analog" (and are "unavailable), six are labelled "QAM", and one is labelled IPTV.  Only the six ATSC devices are being used.  Two of them are on the 2250 card, and four are on the quad-HD card.

I chose the first ATSC device for scanning.

Thanks for the help!

Ed

[mvallevand]

It is coming from the source alright

<service_name>GetTV </service_name>

For future reference in the US you can use the option to scan to channel 36. Cell phone companies bought all the higher channels.

Martin

[sub]

Yeah, that's weird. Usually they wouldn't have spaces at the end.

I've made a modification to scanning logic for the next release to trim any trailing spaces. (so that channels wont end up with spaces at the end of the name)

[FrogFan]

Yeah, that's weird. Usually they wouldn't have spaces at the end.

I've made a modification to scanning logic for the next release to trim any trailing spaces. (so that channels wont end up with spaces at the end of the name)

Sorry to be slow to keep up.  I understand you're going to fix the "trailing spaces" problem in a future release, but if I remove the spaces manually, the icons still don't display in the web app or Kodi.